Offset printing press

Heidelberg SX 74-8 P

Condition: excellent (used), Year of construction: 2000, BOBST Media 100 III A2, age 2000 Equipped with: • Size max. 1000 x 600 mm • Size min. 126 x 60 mm • Speed up to 300 m/min Guedpfx Aswulz Njgfoa • 1-6 points system with 4 guns – Robatech gluing system (age 2017) • straight line gluing • folded bottom and 4-point boxes • feeder with vibration • pre-crushing devices • folding devices with lock bottom module A2 • pneumatically clocked pressing belt and delivery station • control panel with display • extensive tools and accessories • technical documentation • in production • available approx. end of September

Year of construction: 2012, condition: excellent (used), Agfa C95 washout station -good condition Gujdpfx Agjirnmcefja

Condition: used, Year of construction: 1997, functionality: unexamined, Polar Mohr RA-4 Year of manufacture: 1997 After the jogging process is completed, the air is pressed out of the cutting ream. You can perform single or double pressing, with the pressing pressure for the first cycle being adjustable; on an inclined table, intermediate pressing is also possible. Guedpfx Agjwth Rwsfsa Table size: 900x1150 mm Minimum ream height: 30 mm Manual ream height: 80 mm Compressed air requirement at 6–8 bar: approx. 2 L/min

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams. Gedsv Ipl Tjpfx Agfeua

Condition: reconditioned (used), Now in stock at Glendale we have this Morgana Major Folder. This Morgana Major is in perfect working condition having been refurbished by a Morgana trained engineer. It includes a recently replaced new motor and rollers. The sheet count is very low at just 283,000 sheets. This Major folder also includes the perforation and scoring unit. The Morgana Major has been designed to offer a wide range of ‘big machine’ features within a compact and easy to operate design. Changing from one size to another, or for different folds, can be accomplished in seconds. The Morgana Major incorporates counting and batching, with perforating and scoring as standard. A number of unique features have been developed to ensure that the Morgana Major can handle output from digital processes, as well as litho printing. The fold rollers are extremely durable and have the ability to handle a wide variety of stock without adjustment. Not affected by paper dust, their unique composite material will positively grip high gloss papers or work from digital print engines. The Dial-a-Fold plate settings enable all adjustments to be made without removing the covers. An LED display, accurate to 0.1mm, shows the fold plate position and allows easy and accurate repeat job settings. A powerful suction feed handles a wide range of coated or non-coated material and incorporates side lay alignment of the sheets before they enter the fold plates. The feed table also has a suction chamber to control curled or statically charged paper. A larger sheet size of 365mm width and 648mm length makes the Morgana Major even more flexible, capable of producing 6pp A4 documents. The machine speed is fully adjustable from 4500 to 27,500 sheets per hour, giving the operator complete control over the production of a wide range of stocks. The plug-in perforator/scorer is included with this Morgana Major and work is delivered into a catch tray. Key Product Features • Powerful suction feeder handles a wide range of paper weights • Side lay alignment of the sheets, prior to folding • Low pressure suction chamber to control curled paper before it enters the fold rollers • Fully enclosed fold plates with ‘dial-a-fold’ and LED display, fitted with anti-static brushes, skew and micro adjustments • Plug in perforating and scoring attachment Guedjv Hr D Njpfx Agfsa • Variable speed • Tray to catch work when perforating or scoring • Long delivery belt stacker • Counting & batching • Double sheet, anti jam detector Specifications Manufacturer Morgana Model Major Folder Condition Refurbished Stock Number 114925 Max sheet size 674mm x 365mm Min sheet size 148mm x 140mm (94mm with optional narrow sheet attachment) Max paper weight 240gsm (grain direction depending) Min paper weight 56gsm Feeder capacity 500 sheets 80gsm Feeder Suction Feed Speed 4,500 to 27,000 per hour Perforating & Scoring Attachment included Power requirements 240v 50/60hz Machine weight 120kgs Dimensions (L)1168mm x (W)493mm x (H)990mm

Condition: used, Year of construction: 2018, operating hours: 69,000,000 h, functionality: fully functional, Folder gluer machine Folding carton with longitudinal seam: max. 1,150 × 600 mm min. 75 × 55 mm min. 45 × 55 mm (with small carton device) Crash-lock bottom carton: max. 1,150 × 600 mm min. 146 × 80 mm 4-corner box (erected): max. 1,150 × 680 mm min. 120 × 110 mm 6-corner box (erected): max. 1,150 × 630 mm min. 250 × 130 mm With BELKHOFF control system Roller and drying tunnel Guodpsyg Edgjfx Agfoa TÜNKERS EAS 480 delivery station, right-hand, year of manufacture 2019

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production Guedpfx Ajt E Nthsgfja ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Gujdpfx Agjtyqhqefsa

Condition: ready for operation (used), Feeding depth max 1.500 mm Feeding height max 155 mm Table height 870 mm Cutting width 1.500 mm Front table length 750 mm Equipment • program Godpfx Agjd Iapysfeua • air table • side table right • side table left • light barrier • 2 knives

Condition: good (used), Size max 750 x 1.050 mm Gsdpfjd Hp H Ijx Agfsua Stroke height 940 mm Lifting capacity max 600 kg