600 Litre Morton-Lödige Model FKM600 Stainless Steel Jacketed Ploughshare Type Mixer

MORTON-LODIGE FKM600

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Ndjdpfsykn T Eex Af Ssb Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Nedpfx Aszlc Apof Sodb Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Year of construction: 2012, condition: used, Used Pharmix model HHR1200 stainless steel (AISI 316L) double cone jacketed vacuum dryer blender. Approximately 1200 litre total capacity. Internal rated -1/0 bar design pressure at 60°C. Has external stainless steel (AISI 304) jacket 260 litre capacity rated 3 bar design pressure at 70°C. Includes internal stainless steel vacuum pipe. Cone has intlet with bolted lid and bottom discharge with manual valve. Driven through gearbox by 2.2 kW, 400 V, 1420 rpm, 50 Hz el. motor, rotations of dryer are 2.2 rpm. Gearbox is Ex II 2D c 125°C rated / motor II2 D Ex tD A21 T 120°C. Mounted on mild steel support stands. Overall dimensions are 4015 mm (length) x 3975 mm (width) x 3300 mm (height - includes stairs), weight 3430 kg. Unit is dismantled - attached photos are from installation. Nedpjlc Dv Usfx Af Sedb

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, DGUV certified until: 06/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 500 mm, total length: 483 mm, total height: 1,400 mm, Erka WMB 30 Rolling Machine for all stick types such as Kornspitz, pretzels, and lye sticks, etc. Combo rolling machine for strands/pretzel strands Stainless steel design Machine is mobile Connection: 400V, 16A CEE plug Used machine with warranty + spare parts service Option: Maintenance contract Ndedpfxexxgm Eo Af Sob Service package Training & commissioning Delivery service Leasing & rental service We have many more rolling machines in stock!

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Nodpfeyma Dbsx Af Sedb Specifications: Capacity: 400 L Construction Material: Stainless Steel Horsepower: 5.5 kW Jacket: No

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Karl Schnell F150 Emulsifier Manufacturer: Karl Schnell GmbH & Co. KG Model: F150 Type: 049 Machine number: 38717 Year of manufacture: 2015 Power supply: 400 V, 3 phase, 50 Hz, 32 A Power: 7.5 kW Weight: 152 kg Ndodpfx Asycl Rrsf Seb Dimensions: 950 × 700 × 1100 mm The Karl Schnell F150 emulsifier is a professional machine designed for industrial emulsification and homogenisation of food products, used e.g. in the production of sausages, pâtés, fillings, and other mixtures requiring homogeneous consistency. The F series emulsifiers from Karl Schnell ensure a consistent and repeatable emulsion effect, shortening processing time and minimising temperature increase of the product during operation. These solutions are characterised by robust stainless steel construction, ensuring hygiene and equipment durability.

Year of construction: 2026, condition: new, The 2000L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304 stainless steel. - Capacity: 2000L - Motor: 7.5kW, 3-phase, 50Hz - Machine weight: 850kg - Dimensions: (L 2880 x W 1200 x H 2200mm) -we offer mixers from 200L to 3500L Nedpey Ew Tfefx Af Sjdb The mixer's interior and ribbon itself are polished to a high gloss, significantly simplifying and accelerating mixing, as well as facilitating cleaning after use. These mixers are used for mixing bulk, liquid, or semi-liquid materials. Primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: good (used), Ribbon blender, paddle mixer, mixer, blending machine, turbulent mixer Inner surface made entirely of stainless steel Easy Clean system Capacity: 500 liters Motor power: 16.5 kW Mixing ribbon speed: +/- 156 rpm Excluding motor base and belts Njdpfxewyf Ugs Af Sjdb Inlet diameter: 200 mm Outlet dimensions: 160 mm x 160 mm

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 3520.17.137, Tripet TST201CNC No. 3520.17.137, Year of Manufacture: 1987 Ndodpswffmmjfx Af Ssb Power: 76 kW

Condition: used, Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel. Specifications: Horsepower: 20 kW Material Of Construction: Cast iron and carbon steel Njdpfxeygvpae Af Sjdb Type Of Mill: Pin mill