CNC turning and milling center

MORI SEIKI / SAUTER Werkzeughalter feststehende Werkzeugeaufnahmen

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking Nodpou Aa I Sjfx Ahvswc - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE Nwedpov I Tx Rofx Ahvsc MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR MANUALS

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm Nsdpfoxdcigox Ahvjwc - Turning diameter 420-500 mm - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Condition: used, Year of construction: 2017, operating hours: 7,150 h, functionality: fully functional, GENERAL SPECIFICATION 1.1. AXES SYSTEM - Travel : o X axis: 1300 mm o Y axis : 670 mm o Z axis : 625 mm - Spindle to table surface : 150~775 mm - Motor power : o X axis : 3.0 kW o Y axis : 3.0 kW o Z axis : 3.0 Kw 1.2. CAPACITY - Table size : 1500 x 670 mm - Table surface : T-slot 5–125 x 18H8 mm - Max. workpiece weight : 1300 kg - Max. workpiece height : 700 mm 1.3. SPINDLE HEAD - Motor power (Cont./30min.) : 15/18.5 kW - Max. spindle speed : 12.000 rpm (optional) - Max. torque (short term) : 117.8 N·m - Taper type : ISO # 40, 7/24 Taper 1.4. TOOL MAGAZINE - Tool storage capacity : 30 scule - Tool shank : MAS403 BT40 - Pull stud : PS806 (NIKKEN) - Maximum tool diameter : o Continuous : Ø80 mm o Adjacent pots empty: Ø125 mm - Max. tool lenght : 300 mm - Max. tool weight : 8 kg - Tool change time (Tool-to-tool) : 1,2 sec - Tool change time (Chip-to-chip) : 3,4 sec 1.5. RAPID TRAVERSE - Rapid traverse: o X, Y axis : 36 m/min o Z axis : 30 m/min - Max. Cutting feedrate :15.000 mm/min - Ballscrew (Diameter x Lead) : o X, Y axis : 40 x 12 mm o Z axis : 40 x 10 mm 1.6. ACCURACY - Positioning : ±0.005 mm - Repeatability : ± 0.002 mm 1.7. LUBRICATION UNIT - Tank capacity : 0,7l Nwsdpfxox Ecybo Ahvjc 1.8. COOLANT SYSTEM - Tank capacity : 325 l - Pump motor power : 0,4 kW - Max. flowrate: 40 l/min 1.9. DIMMENSION AND WEIGHT - Dimmensions (LxlxH) : 2597 x 3350 x 3120 mm - Weight : 8.500 kg 1.10. OTHER CHARACTERISTICS - Electrical power supply : 3Ph-AC220V/60Hz x 33,5kVA - Air power supply : 0,54 MPa x 250 Nl/min - CNC Control : Fanuc i-Series 1.11. Accessories: • TSC 20 bar • 12.000 rpm • Chip conveyor

Condition: used, Year of construction: 2000, Lathe Mori Seiki SL 200 MC, year of manufacture 2000 Nwjdpfx Asxyvkvshvjc

Condition: excellent (used), Year of construction: 2010, MORI SEIKI DuraVertical 5060 Year: 2010 Control MSX-504 III x-travel 600mm y-travel 530mm z-travel 510mm Main spindle: turning speeds max. 10.000min/-1 power capacity - main spindel 15 / 11kW tool taper BT 40 spindle bearing diameter 70mm distance spindle /table 150 - 660mm work table: table surface area 900 x 600mm max. table load 500kg T-slots 6x 18mm turret: Nsdpfexq Hlxjx Ahvjwc number of toolpositions 30pos. tool taper BT 40 max. tool diameter 80mm max. tool-dia with free toolbox 125mm max. tool length 300mm max. tool weight 8,0kg feeds: rapid traverse ( X / Y / Z ) 36 / 36 / 20m/min feed speeds max. 6.000mm/min Tipp feed 0 - 5.000mm/min total power requirement 27kVA weight of the machine ca. 5,8t dimensions of the machine ca. 3,5 x 3,0 x 2,8m Accessories/options: 4.axis rotary table tool holders BT40 type, 30 pieces precision vice swarf conveyor coolant tank documentations

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Nwodpfx Aermkfnjhvjc Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 2014, max. turning diameter 160 mm Nedpjqvd Iujfx Ahvowc max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Nwsdpox Hp Hgefx Ahvjc Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Chip Conveyor Coolant System Machine Data Machine Weight: approx. 5,000 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Nwodpexmirgefx Ahvsc Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking