Miwe Condo 4-6080

Miwe Condo 4-6080

Condition: new, Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Dedofd Raaopfx Ab Tscr Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2500-A-BBBBCAAA, Wiesheu combi oven; Dodpfx Abst R Tgps Tecr - Euromat 64 S Backofen 2500-A-BBBBCAAA - Ebo 68 M Backofen X1625-A-BBDDA In very clean condition. Everything works properly. Please contact for more information.

Condition: good (used), functionality: fully functional, Shop baking oven Miwe Model: Gusto Convection oven for 3 trays 460 x 330 mm Stainless steel construction with exhaust hood Manual control Direct water connection for steaming With proofing cabinet below Tested only by us and DGUV V3 certified Connection: 230V, 2 x Schuko plug Dimensions: 600 x 680 x 1860 mm (W x D x H) Used oven, cleaned & SAB tested Option: Water filter Maintenance contract Dsdpfx Ajtrt Dcsb Tecr E-box Service package Delivery service Many more ovens in stock

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 12/2026, total length: 825 mm, total width: 520 mm, total height: 950 mm, input frequency: 50 Hz, type of input current: AC, power: 1.8 kW (2.45 HP), electrical fuse: 10 A, spiral kneader Model: ECO 18 Kneading machine with mature and robust technology! Dcodpfem Tqykex Ab Tor LED control Dough machine with 2 timers 2 gears in 10 steps for min/max 2.5 to 18 kg of dough flour dust hood Stainless steel boiler and spiral Machine mobile with 4 brakes DGUV V3 tested Connection 220V, 1.8 kW, Schuko plug Dimensions: 520 x 825 x 950 mm, WxDxH NEW machine With 24 months warranty TOP selection of bakery machines!

Condition: excellent (used), Kemper Eco 50 Spiral Mixer For further information please send an message Dcodpfx Abskzkrhj Tor

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 08063406 3441, roller (bottom) diameter: 265 mm, roller (top) diameter: 285 mm, roller length: 3,100 mm, sheet thickness steel (max.): 15 mm, overall weight: 8,000 kg, total length: 5,300 mm, total width: 1,200 mm, total height: 1,700 mm, power: 14.71 kW (20.00 HP), type of input current: three-phase, Equipment: emergency stop, Roll bender for sale from a private individual. Rolling capacity 5xD = 15 Prebend capacity 5xD = 12 Prebend capacity 1,3xD = 9 Dcedpfx Absvl H Rbo Ter

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm Dcedohzbipepfx Ab Ter IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Type: GS510 Serial number: Y6242 Capacity: up to 4000 kg/h Block cross section: max 500 x 300 mm Infeed height: 1750 mm Power: 3 x 380V, 50Hz, 18.5kW Dcodpfx Abot Tadtj Tor Dimensions: 1700 x 1800 x 2100 mm Weight: 1000 kg With lifter for frozen blocks

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, POLY-CLIP RCA ID.NO. 2708 Dodpfstrf Egox Ab Tjcr Poly-Clip mod RCA automatic double clip machine handles calibers from 25 mm - 55 mm both natural casing & collagen casing. Pipe that comes with is 24 mm + associated brake. Dimensions 100 x 80 cm Height 195 cm.

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Dcsdpfx Abodnxydo Ter Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.