Coordinate measuring machine

Mitutoyo Crysta-Apex C544

Condition: excellent (used), Year of construction: 2003, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Reliability at the highest level – for precise measurement results from day one. This used 3D coordinate measuring machine from renowned manufacturer Mitutoyo impresses with proven technology, a compact design, and exceptional precision – ideal for small to medium-sized measuring tasks in industry and quality control. With the Kneissl Approved Guarantee, you receive a machine that has been fully tested, documented, and delivered with a 6-month warranty – hassle-free measurement right from the start. ✅ Kneissl Approved – Your Seal of Verified Quality • Officially recommended by Mitutoyo Only machines with documented maintenance and traceable history • Inspected by former Mitutoyo technicians Over 35 years of experience – every machine is inspected more thoroughly than any standard requires • 6 months warranty included On all inspected components and functions – for maximum investment security 🔍 Technical Specifications General Information: • Manufacturer: Mitutoyo • Model: Crysta-Apex C544 • Year of Manufacture: 2003 Measuring Ranges: • X-axis: 500 mm • Y-axis: 400 mm • Z-axis: 400 mm Control & Software: • Controller: UC-200 • Software: MCOSMOS-1 V4.1 (latest version installed) Blsdpswxwf Iefx Ab Tjr Probing System: • Probe mount: PH-6M (upgradeable to PH-10M) • Probe: TP-200 • Change rack: SCR-200 incl. 1x TP-200 module 🛠 Condition & Delivery This machine has been inspected and refurbished as part of the Kneissl Approved process on the following points: Electronics & circuit boards – tested for thermal load & function Air bearings & guides – checked & relapped as required Mechanics, control system & software – in technically flawless condition 📦 Scope of Delivery • Mitutoyo Crysta-Apex C544 • UC-200 Controller • MCOSMOS-1 Software (V4.1) • Probing system PH-6M with TP-200 & SCR-200 (incl. 1 module) • Inspection protocol & Kneissl Approved certificate • 6 months warranty 💡 Your advantage with Kneissl Measuring Technology: Don’t just buy any used machine – trust in certified precision with documented provenance and expert inspection. → Enquire now and measure with peace of mind.

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Bodpfx Abev S Dp Io Tjlr Weight: 12000kg

Condition: like new (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, CME TRAVELING COLUMN MILLING / BORING MACHINE CME TECHNICAL FEATURES - VISIBLE IN OPERATION Brand: CME Model: MB 9000 Bedpfx Aju R Rk Heb Telr Year: 2007 CNC: Siemens Sinumerik 840D X-axis: 9000 mm Y-axis (Vertical): 4000 mm Z-axis: 1000 mm W-axis (Ø 150 mm): 700 mm 2 rotary translation tables (linear travel: 2000 mm) 2500 x 2500 mm (25 TN) capacity Heidenhain optical scales on all axes Direct spindle 90-position tool change ZF range change Internal coolant Chip extractors

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, - milling head/spindle retrofit in the year 2022 for 28.000 Euro - CNC control Heidenhain iTNC530 - NC swivable milling head: B-axis full NC-axis A-axis horizontal/vertical - NC-rotary table (C-axis) - tool changer for 72 tools Bledpfjrz I Hbjx Ab Tsr - chip conveyor - electronical hand wheel - coolant device (coolant through spindle device 20bar) Technische Daten / technical details: Verfahrweg X längs / X-Travel longitudinal 1200 mm Verfahrweg Y quer / Y-Travel cross 600 mm Verfahrweg Z vertikal / Z-Travel vertical 700 mm C-Achse Rundtisch / C-axis rotary table 360 ° B-Achse / B-axis +-90 ° Rundtischgröße / rotary table size 800 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 0-6300 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 72 fach Antriebsleistung Spindel 100/40%ED / drive capacity spindle 100/40%ED 17/25 kW Gewicht der Maschine ca. / weight 9000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Tool holder shaft type:HSK-A 100 Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Bledpfxjg Nqlij Ab Tjr Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request.

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Bledpfx Abjwz I Acs Tsr Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m Blodpfx Abswwwqhj Tjr The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, grinding wheel width: 150 mm, grinding wheel diameter: 305 mm, year of last overhaul: 2025, Grinding wheel diameter 305x150 mm, workpiece diameter 1-40 mm, machine for plunge and through-feed grinding, PLC control, coolant system, hardened and ground guideways, grinding and regulating spindles with hydraulic slide bearings via three-point bearings, hydraulically adjustable dressers for grinding and regulating wheels, regulating wheel drive adjustable via AC motor, new German-made electrical system with Siemens components, Siemens S7 control system Bljdpfx Aswi H Uaeb Tsr

Condition: good (used), Year of construction: 2009, functionality: fully functional, We offer: Universal Machining Center Manufacturer: Deckel Maho Type: DMC 80 U Year of manufacture: 2009 Control: Heidenhain MillPlus Blsdpevx Tmcjfx Ab Tsr Technical specifications: X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm C-axis: 360° A-axis: -25° / +120° Max. spindle speed: 10,000 rpm Table size: 630 x 630 mm Max. table load: 800 kg Center bore: ⌀ 50 mm Tool holder: SK40 Tool changer: 180 positions Feed rate (x/y/z): 0 - 60,000 mm/min Rapid traverse (x/y/z): 60 m/min Operating hours: approx. 75,463 h Spindle hours: approx. 22,122 h Technical features: - Internal cooling Accessories: - Chip conveyor - Measuring probe Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - C axis indexing precision : 0.001 [°] - Z stroke : 445 [mm] TURRET 1 - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 105/400 [mm] - Y stroke : 120 [mm] - B Axis stroke : +90/-270 [°] - Tool type : VDI 25 - Live tools speed : 6000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4.975 X 2.890 [mm] - Machine height : 2.050 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840C Blodsu Hadhjpfx Ab Tsr - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : LNS