Wire EDM machine

Mitsubishi FA20-S Advance

Condition: used, Year of construction: 2012, Travel distance: X 500 mm Y 350 mm Z 300 mm Water bath machine Dusdpfxjuu Dl Ro Afnsl Automatic wire threader

Condition: excellent (used), Hello, we offer used Erowa PalletSetW vices. They have been cleaned and checked by us. ER-025895 Vice PalletSet W 40mm ER-054922 flat vise 8mm PalletSet W ER-055774 Vice 0-170mm In addition, a functional test was carried out. The vices have slight signs of wear and are technically in very good condition. Individual purchase also possible. Spare parts are also available Do you have any questions? Then we are at your disposal. Djdpfxoitcq Ts Afnsul

Condition: good (used), Year of construction: 2015, Machine is in good condition, parts shown by hand not come. X 1025 mm Duedpfxswx N Nfe Afnjl Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 rpm HSK 63

Condition: good (used), Year of construction: 1992, 1,0 St. gebr. Flachschleifmaschine Hersteller: ELB Typ: SUPER - RUBIN 024 CNC Baujahr: 1992 Verfahrwege: Schleiflänge: 600 mm Schleifbreite: 275 mm Schleifhöhe: 375 mm Tischaufspannfläche: 900 x 300 mm Tischbelastung: 300 kg Dodpfx Aei Ra Tysfnoul Vertikal - Vorschub: max. 300 mm/min. Quervorschub: max. 2.000 mm/min. Steuerung: UNICON Im Lieferumfang sind Schleifscheiben enthalten siehe Fotos.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Dsdpfxjw Ucyus Afnoul Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h Dsdpfx Afjxcp Srenoul - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: new, Year of construction: 2025, functionality: fully functional, A sandblaster connected to a compressor is an ideal solution for quick, accurate and effective cleaning of various surfaces, eg removing rust, paint, sludge from metal surfaces, such as: automotive parts, engines, fittings, casings, wheels, rims, hinges, etc. As abrasive can be used, among others: sand made of plastic, corundum, quartz, glass, etc. The sandblaster we propose is very well equipped and prepared for work. Machine description The machine is equipped with a proven control system, a solid and roomy chamber with side doors, a solid sandblasting gun, four ceramic nozzles, high-quality work gloves, workspace lighting, a large window - a viewfinder (without a blind spot). The recommended device is provided in addition to a compact construction and a large and spacious workspace, ease of use, reliability and work safety. Dust-free operation of the device is ensured by the use of perimeter gaskets, which allows you to perform work in an environmentally friendly way. The blasting hose was placed in the bottom of the collecting container. The drain hole allows a quick change of material for sandblasting. The advantages of our sandblaster model Complete for use Comfortable sandblasting gun with 4 interchangeable ceramic nozzles Large, stable side door with rubber perimeter gasket for safe and dust-free operation High-quality rubber gloves integrated with the device Venting connection Efficient lighting of the working space 4 pieces of removable protective film for the window, viewfinder Sanding hose located in the bottom of the collecting container Adapted to work with various abrasives The drain hole allows a quick change of material for sandblasting Ease of use, reliability and work safety Technical data Workspace dimension 840x550x370-550 mm Air consumption 400-700 L/min Required air pressure 2,75 - 5,5 BAR Arm hole opening 180 Air connection 1/4" Weight 49 kg We kindly inform you that the device requires self-assembly. Duodpfx Ajrh Erxsfnol The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Completely refurbished 2018 with new Pantec Eagle Pro Controller Duodpfxsdpak Re Afnsl Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Option : Laserscanner (e.g. Kreon) Probe changer

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 160 mm Dusdpfxofv H H Hs Afnel spindle taper MT 4 MK table: 500 x 420 mm column diameter 120 mm turning speeds 85 - 1800 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 0,85 / 1,5 kW weight of the machine ca. 500 kg. range L-W-H 965 x 515 x 1920 mm

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Dodpfjxfaqkjx Afnjul Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC