Bag filter – Capacity 45-50000

MION MVT MC 45-50000

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 4 h, machine/vehicle number: 15582, VOLVO wheel loader L60H with high-tipping bucket (SW mount) • Tires 600/65R25 Michelin XLD (L3) • Rims for 20.5-25 and 600/65-25, three-part • Full-cover fenders for wide tires 65 series Ndsdpjvmp Hnsfx Abgjd • Mud flaps for wide tires 65 series • Mesh filter in the filler neck • Hand throttle • Automatic engine shutdown • Machine shutdown, delayed • Engine D6J, emission level V (EU) • Reversible fan • Speed limiter, 40 km/h • Traction roller • Premium comfort seat / 3-point belt (air-suspended, heated, horizontally suspended) • Air conditioning incl. automatic climate control ACC • Radio DAB + incl. USB and AUX connection / Bluetooth • DAB + radio preparation right, incl. loudspeaker • Steering wheel button • Sliding window in the driver's door • Sun blind, side window • Rear view camera incl. LCD monitor (color) • Emergency steering • S-cab air filter • CDC comfort driving and steering gear • Operating permit attached in the cabin (wire cable) • Electrically adjustable, heated rear view mirrors • Noise reduction kit, EU excl. sticker • License plate holder incl. lighting • Driving/main headlight LED asymmetrical right • LED power package • Rotating beacon, LED • Reversing warning device (acoustic) broadband sound • 4th hydraulic circuit (standard mast) b. Multi-lever operation • Separate device lock for quick coupler • Central lubrication system (Volvo) • Wheel wrench set • Tool set • Step, right side • BSS mast damping • Additional counterweight 500kg for wood and industrial applications • Trailer coupling • Reinforced protective grille for rear lights • Tooth guard for bucket • Protective plates for rear frame, right and left • Sound marking • CE marking • Kit German version • Caretrack GSM (hardware) • Caretrack GSM basic version (according to current VCE conditions) • Hydraulic quick coupler • VOLVO high-tipping bucket – SW mount, width: 3,000mm, capacity: 7m3

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Ndjdpfx Aomiik Tjbgsd Width: 1550mm Height: 1560mm

Condition: new, Number of spindles 6 St. Working width 250 mm Working height 150 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. weight 4770 kg Dimensions (L/W/H) 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Ndodpfovnv Ubsx Abgjd Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!)

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Ndodpfx Aev Si Szebgjd Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), Year of construction: 2022, How do you do? We are offering you our cross-cut saw from MS Maschinenbau in very good condition. Technical data: Lengths between 600 mm - 3000 mm Workpiece thickness min. 3 mm max. 100 mm feed 5-30 m/min stepless Roller table is included Condition is as good as new If you are interested, the machine can also be tested. If you have any questions, please contact us. Nsdpotykw Sjfx Abgodd

Condition: refurbished (used), overall weight: 7,800 kg, Jaw width: 650 x 450 mm Capacity: 12 - 60 cbm/h Ndjdpfsq Tth Tex Abgjd Gap width: 35 - 150 mm Weight: 7,800 kg Power requirement: 45 kW Completely overhauled in the workshop and newly stored

Condition: used, SCM Tech 99L Machining center Transport dimensions: Nsdpfx Aetxdqcebgedd mm 4,800x 230 h. 260 weight 2800 kg

Condition: used, 2-axis CNC spindle moulder "CASOLIN" model F 90 KTL USED MACHINE - V380/50 - "CE" [code: TOU-051] Complete with: * extended infeed table 1990x770 mm Nodpsw Awk Ssfx Abgedd * extendable support bar * tenoning guard (for tools max. diameter 330 mm) * tenoning carriage * pendant control * support for powered feed unit * 4-roller feed unit "MAGGI" * strip protection device * spindle diameter: 40 mm * spindle speeds: 3000/4500/6000/8000/10000 rpm * motor power: 7.5 kW

Condition: good (used), Year of construction: 2012, functionality: fully functional, filter area: 120 m², volume flow: 18,000 m³/h, Filter hose length 2000 mm Mechanical/pneumatic shaking Base assembly with agitator and screw discharge Gear motor 2.2 kW Ndodpfxjwhlkwo Abgsd Connection for briquette press with air recirculation

Condition: used, Year of construction: 2006, SCM Reccord 142TUN Nsdpfx Aevk U Tujbgjdd - Year: 2006 - manufacturer: SCM - Model: Reccord 142TUN