Center lathe

Meuser KM1/185

Condition: used, Year of construction: 1987, greates pass round over bed 560 mm Ncsdsy Nfblopfx Ag Tsw swing diameter over face slide 365 mm turning speed range - main spindle 11,2 - 2.240 min/-1 drive capacity - main spindle 15 kW spindle head No. 8 spindle diameter in front bearing 100 mm spindle bore 62 mm machine weight ab. 2,5 t dimensions of the machine ca. L 3,5 x B 2,0 x H 2,2 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine has undergone a geometric overhaul. Technical features & accessories: - 3-axis digital readout, Fagor - Rapid traverse Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Njdsyyxlfspfx Ag Tocw Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: Nodpsxg Nd Aefx Ag Tjcw See photos

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders Nedpoydk Hhefx Ag Tjcw - Bed stop - Chip tray

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz Nedpfoqwlmqox Ag Tocw machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead Nodoxy S A Ispfx Ag Tscw - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest - 1 set of drive knobs - Various wheel holders

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Nedpfx Agjvzn Its Tjcw Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Condition: used, Year of construction: 1999, turning diameter 450 mm Ncjdpfx Aevanvneg Tew turning length 380 mm control FANUC

Condition: used, Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head -Manufacturer:BWF, thread rolling head -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg Nedpfxju Tyvho Ag Tecw

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter over bed slide: 320 mm, turning length: 910 mm, total length: 700 mm, total width: 1,610 mm, total height: 1,350 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 65 rpm, metric thread diameter (max.): 6 mm, metric thread steps: 23, overall weight: 272 kg, three-jaw chuck diameter: 160 mm, The HOBBY 910 G lathe in its standard configuration comes equipped with a leadscrew and feed shaft for threading, as well as for automatic longitudinal and cross feeds. The 12-speed gearbox allows for quick speed adjustment without the need to change the V-belt. Thanks to its compact design and high weight, the machine ensures quiet and highly precise operation. - Easy and quick spindle speed changes via the gearbox - High concentricity due to precision ball bearings - High-power drive motor with high torque, spindle speed range 65 - 1650 rpm - Wide scope of use: precision engineering, vocational training centers, educational institutions, etc. - Simple feed adjustment mechanism, smooth and precise switching - Rigid machine bed with induction-hardened and ground guideways - Optimally suited for machining steel, non-ferrous metals, and plastics - Standard equipment includes a leadscrew for automatic longitudinal and cross feed - Saddle with handwheels with precision dials Centre distance: 910 mm Centre height: 160 mm Swing over bed: 320 mm Bed width: 160 mm Spindle bore: 38 mm Spindle taper: MT 5 Spindle speed min.: 65 rpm Spindle speed max.: 1650 rpm Speed change - number of steps / stepless: 12 Longitudinal feed range: 0.087 – 2.049 mm/rev Cross feed range: 0.019 – 0.444 mm/rev Metric thread: (23) 0.25 – 6 mm Nodpfsyn Amnex Ag Tscw Imperial thread: 4 – 120 TPI Tailstock quill travel: 75 mm Tailstock taper: MT 3 Motor power: 1.5 kW Continuous motor power S1 100%: 1.1 kW Voltage: 230 V Dimensions (W): 1610 mm Dimensions (D): 700 mm Dimensions (H): 1350 mm Weight approx.: 272 kg Scope of supply: - 160 mm 3-jaw chuck - Cross slide - Fixed centres - Change gears - 4-way tool post - LED work lamp - Chuck guard - Chip tray - Leadscrew cover - Service tools - Stand