Band saw

MD Dario SN44

Condition: new, Brand new stainless steel container Article number: 10846 Volume: 550 L Type: Standing on a plastic pallet Material (in contact with the media): Stainless steel V2A / AISI 304 Number of fixings: Plastic pallet Bottom: Dished bottom Max. operating pressure: Atmospheric Ibjdpfx Afsv Dunfsuja Container dimensions: Inner diameter: 815mm Outer diameter: 890mm Total height: 1330mm Cylindrical height: 1070mm Total width: 890mm Materials: Inside: 14301 / AISI 304 Outside parts: 14301 / AISI 304 Facilities: Nameplate: no Outlet diameter: 50mm Distance from drain to floor: 160mm

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 3 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 1,850 mm, total width: 100 mm, overall weight: 142 kg, inner dimension width: 863 mm, inner dimension length: 1,723 mm, inner dimension height: 733 mm, tank capacity: 595 l, energy consumption: 5 kWh, power: 0.4 kW (0.54 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); Ibodpfxjrhwt Sj Afuea (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) - Can be used as a stand-alone unit - Can be used in a line up Btqqmuwb - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Condition: used, planer, electric planer -Manufacturer: Black & Decker, electric planer type SR 600 -Speed: 14500 rpm -Nominal power consumption: 500 watts -Dimensions: 400/150/H140 mm -Weight: 3.3 kg Iedpfx Ajuwgg Refueba

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters Ibsdpfxjvncubo Afuja - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Isdpfert Uvzex Afujba Very good used condition, fully operational

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 20,000 l, diesel filling station 20000 litre with pump Ijdpsi Artljfx Afusba

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 • Simple three-point hitch • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height • Offset of 1.30 m on each side of the axis • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included Ijdpfx Aor Eznisfuoba

Condition: good (used), Year of construction: 2004, Universalfräsmaschine mit Streckensteuerung HEIDENHAIN TNC 124 mech. Handräder drehbarer Kipptisch +- 45°, hydr. Werkzeugspannung, Halbkabine Kühlmittelbehälter Handbuch Ibjdpfx Afjigm Tcsuja Technische Details: x-Weg 600 mm y-Weg 400 mm z-Weg 400 mm Spindeldrehanzahl 63 - 3.150 1/min Vorschub stufenlos 12-3000 / 6-1500 (Z) mm/min Pinolenhub 100 mm Kopf schwenkbar +/- 90° Spindelaufnahme ISO SK 40 Aufspannfläche 630 x 400 mm Gesamtleistungsbedarf 8 kW Maschinengewicht ca. 2,2 t Raumbedarf ca. 2 x 1,9 x 1,95

Year of construction: 2015, condition: ready for operation (used), A coolable (isolated) Fabdec milk tank is available. Volume: 10000l, length: approx. 3000mm, diameter: approx. 2200mm. The tank is equipped with an integrated agitator and a spray system for CIP cleaning. A cooling unit is not included. Iodst Hxdlopfx Afujba

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Ibsdpfxswzzh Ee Afuoa Subject to price changes, errors, misprints and typographical mistakes excepted.