Mazak VCS 530C

Mazak VCS 530C

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 6800 kg Measurements height 2808 mm Dimensions Machine Length 2929 mm Table Table load 1200 kg Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 18.5 kW Movement X-Axis Movement 1050 mm Z-Axis Movement 510 mm Y-Axis Movement 530 mm Hnedpfxex E Edxs Ah Njg Tools Max weight 8 kg This 3-axis Mazak VCS 530C vertical machining centre was manufactured in 2014. It features a table size of 1300x550 mm, X/Y/Z travels of 1050/530/510 mm, and a maximum spindle speed of 12000 min⁻¹. The machine supports a table load up to 1200 kg and includes a 30-tool magazine with a rapid tool change time of 2.8 seconds. Consider the opportunity to buy this Mazak VCS 530C vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Hnedpfxot Hwzio Ah Nog Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 41 kVA, controller model: Mazatrol Matrix Nexus 2, workpiece weight (max.): 8 kg, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 9,271 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – Well-maintained, inspected & ready for immediate use For sale is a Mazak VCS 530C vertical machining center in excellent, well-maintained technical condition. The machine has undergone regular servicing and is in outstanding optical and mechanical shape. It is fully functional, thoroughly checked, and immediately ready for operation. The Mazak 530C stands out with its high-quality features, including a 4th axis, allowing complex workpieces to be machined precisely and efficiently, providing enhanced flexibility. Additionally, the automatic door offers increased user comfort, resulting in reduced setup times and increased safety during operation. The integrated coolant system (KSS unit) ensures optimum chip evacuation, which in turn leads to longer tool life and excellent surface finishes. Combined, these features deliver a powerful package focused on productivity, precision, and reliability. With our all-inclusive service package, we can personally handle the complete process upon request—from delivery to commissioning of your new machine. This includes unloading, placement, and precise alignment of the machining center. Thereafter, our experienced service technicians will carry out professional commissioning, perform all necessary function checks, and ensure that your Mazak VCS 530C operates reliably and accurately. We also offer tailored training programs for your staff so you can make optimal use of the machine from day one. Even after installation, we remain your competent point of contact—whether for maintenance, technical questions, or future upgrades. With our all-inclusive package, you have nothing to worry about—we ensure everything runs smoothly so you can focus completely on your production. Additionally, you can acquire extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units to make your production even more efficient and cleaner. Our service commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialized in Mazak machinery and other equipment. We place great emphasis on personal support and are happy to assist you any time, even after your purchase. You are also welcome to inspect and test the machine under power at our facility at any time. You are cordially invited to visit us and see for yourself the condition and functionality of the machine. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG Hnjdpfx Asxu Hhzoh Nsg All specifications are subject to change without notice.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 11 kVA, workpiece weight (max.): 8 kg, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 16,024 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – well-maintained, inspected & ready for operation For sale is a Mazak VCS 530C vertical machining center in well-kept, technically flawless condition. The machine has always been serviced regularly and is in very good visual and technical condition. It is fully functional, thoroughly inspected, and immediately ready for operation. With our all-inclusive service package, we personally handle the entire process for you upon request – from delivery right up to commissioning your new machine. This includes unloading, setting up, and aligning the machining center. Afterwards, our experienced service technicians will carry out professional commissioning, perform all necessary function checks, and ensure that your Mazak VCS 530C runs reliably and precisely. We also offer customized training sessions for your employees, so you can utilize the machine optimally from day one. Even after installation, we continue to support you – whether with maintenance, technical inquiries, or future expansions. With our all-inclusive package, you don’t have to worry about a thing – we ensure everything runs smoothly so you can focus entirely on your production. Additionally, you can purchase extraction units, attachments, and accessories from us, including high-quality Donaldson extraction systems to make your production more efficient and cleaner. Our service commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specialized in Mazak machines as well as other brands. We place great value on personal support and are happy to assist you at any time, even after your purchase. You are also welcome to visit and inspect the machine under power at our facility. You’re cordially invited to see the condition and functionality for yourself on site. With us, you’re in the best hands – professional, reliable, and passionate about machines! Hedpexuqrkofx Ah Nong PS CNC Service Germany GmbH & Co. KG All details without guarantee.

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and Hsdpfx Ajxp Rywoh Njng optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, table width: 670 mm, table length: 1,500 mm, DNM 6700 with fanuc control BT 40 shank with the below options : -12.000 rpm - TSC 70 bar - Data Server 1 GB - ACC II - Renishaw Touch Probe OMP 60 Hnjdpfxsw El U Ro Ah Njg - Air blower -Automatic power off

Condition: used, Year of construction: 1980, Surface grinding machine Jung automatic feed Speed continuously adjustable Feed continuously adjustable Hedpfev Icqiox Ah Neng Electrics defective

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 420 mm z-travel 500 mm spindle taper SK 40 table surface area 700 x 400 mm table load capacity 800 kg control Heidenhain TNC 426 rated capacity 40 kVA voltage 400 V weight of the machine ca. 6,5 t dimensions of the machine ca. 3,4 x 3,7 x 2,9 m DECKEL-MAHO machining centres are suitable for manual and automatic operation. --> Area of application MILLING: --> DRILLING: --> Face milling --> Face countersinking --> Circular milling --> Circular drilling --> Screw milling --> Screw drilling --> Gear milling --> Profile drilling --> Profile milling --> Form drilling --> Form milling --> Including vertical tool changer with double gripper --> Tool magazine, variable space coding (VPC): --> Number of tools: 20 --> Standard tool - max. Ø: 90 mm --> Special tool - max. Ø with free neighbouring spaces: 140 mm Hodpow Inrvefx Ah Nsng --> Max. tool length from spindle nose: 300 mm --> Max. tool weight: 12 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Equipment: chip conveyor, Chip conveyor Through-spindle coolant 20 bar Hsdexx T Dqjpfx Ah Nsng 3-color signal lamp Electronic handwheel Performance package

Condition: used, Year of construction: 1984, functionality: fully functional, grinding length: 600 mm, grinding width: 250 mm, table length: 600 mm, type of input current: three-phase, table width: 250 mm, input voltage: 380 V, We are offering this used K. Jung JF 625 surface grinding machine, year of manufacture 1984. Hnodjx Tdp Ajpfx Ah Nog Type: JF 625 Serial number: 1005 Year of manufacture: 1984 Voltage: 380 V Phases: 3 Frequency: 50 Hz Rated current: 30 A Supply fuses: 35 A Control voltage: 220 V Wiring diagram no.: O JF625-S-11 If you have any questions or require further information, please feel free to send us a message or give us a call.