Tension carriage for gates

Mayrhofer GmbH

Condition: used, Year of construction: 2006, Block bandsaw / Bandsaw for round timber MEBOR HTZ 1200 Professional Maximum log diameter: 120 cm Maximum cutting length: 18 meters (original cutting length: 13 meters) Wheel diameter: 1200 mm Machine width: approx. 2800 mm Csdpfx Abjxxlqpj Tjaa Machine height: approx. 2000 mm Main drive motor: 45 kW Total power: 55 kW Year of manufacture: 2006 Equipped with scoring saw with hydraulic log clamps with log turner / chain turner with board removal conveyor belt Location: Austria, near Ried im Innkreis

Condition: used, Complete sawmill, for now only for sale as a whole. Reservation for individual purchase possible at any time. Sawmill consisting of: 01. Log infeed 3-strand Mayrhofer with separator with inserter Total length: 8 meters Width: 3.5 meters 02. Fully hydraulic carriage Mayrhofer with auxiliary carriage with rails Track gauge: 90 cm 03. Pini & Kay FN65 HH frame saw Passage width: 650 mm Drive motor: 33 kW With saw blades With suspension With intermediate gear With splitting wedge With scraper conveyor for sawdust 04. Frame roller table with 3 extractors and steep conveyor Length: 8.5 meters Width: 1.8 meters Roller width: 1.6 meters 05. Extraction table 4-strand Length: 4.5 meters Width: 2 meters 06. Steep conveyor 4-strand Conveyor length: 3.6 meters Width: 3.8 meters 07. Double edger Paul KME 2 Casdpfxewptuyo Ab Tsa 0-line left Right-hand machine Drive motor: 22 kW With 2 under-table crosscut saws With hydraulic roller lifting With hydraulic width adjustment With sliver separator With extraction table/cross conveyor for slivers With elevator for main material With conveyor belt With spiral roller conveyor With manual box sorting (10 boxes/carts) 08. Sharpening room consisting of: Frame saw sharpener Vollmer CNHV 1978 Set device Loroch SGB 6 1983 09. Drying chamber Vanicek Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 4 h, machine/vehicle number: 15582, VOLVO wheel loader L60H with high-tipping bucket (SW mount) • Tires 600/65R25 Michelin XLD (L3) • Rims for 20.5-25 and 600/65-25, three-part • Full-cover fenders for wide tires 65 series • Mud flaps for wide tires 65 series • Mesh filter in the filler neck • Hand throttle • Automatic engine shutdown • Machine shutdown, delayed • Engine D6J, emission level V (EU) • Reversible fan • Speed limiter, 40 km/h • Traction roller • Premium comfort seat / 3-point belt (air-suspended, heated, horizontally suspended) • Air conditioning incl. automatic climate control ACC • Radio DAB + incl. USB and AUX connection / Bluetooth • DAB + radio preparation right, incl. loudspeaker • Steering wheel button • Sliding window in the driver's door • Sun blind, side window • Rear view camera incl. LCD monitor (color) • Emergency steering • S-cab air filter • CDC comfort driving and steering gear • Operating permit attached in the cabin (wire cable) • Electrically adjustable, heated rear view mirrors • Noise reduction kit, EU excl. sticker • License plate holder incl. lighting • Driving/main headlight LED asymmetrical right • LED power package • Rotating beacon, LED • Reversing warning device (acoustic) broadband sound • 4th hydraulic circuit (standard mast) b. Multi-lever operation • Separate device lock for quick coupler • Central lubrication system (Volvo) • Wheel wrench set • Tool set • Step, right side • BSS mast damping Caodovmp Hnspfx Ab Tea • Additional counterweight 500kg for wood and industrial applications • Trailer coupling • Reinforced protective grille for rear lights • Tooth guard for bucket • Protective plates for rear frame, right and left • Sound marking • CE marking • Kit German version • Caretrack GSM (hardware) • Caretrack GSM basic version (according to current VCE conditions) • Hydraulic quick coupler • VOLVO high-tipping bucket – SW mount, width: 3,000mm, capacity: 7m3

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Cjdpfx Aou Atmueb Teaa Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2008, Bioflamm SR-EB9 wood chip boiler, moving grate furnace, year of manufacture 2008, a new heat exchanger was installed in 2018, output 830 kW, hot water system max. temperature 120°C, incl. feed auger with backfire protection, incl. fuel chain conveyor, incl. 2 pcs push floor containers of 30m³ each, incl. automatic ash removal, incl. hydraulic unit, incl. control system, dismantling must be carried out by the buyer. Caodevytfuspfx Ab Toa

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: - Electric - Hot water / steam - Gas Key advantages: Cajdpfx Asw Hf Adob Tsa - Compact, transportable design for genuine mobility - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations.

Condition: good (used), Year of construction: 2001, Good, used condition. Few operating hours (1675 hrs). Cjdpfswcc D Rjx Ab Tjaa Motor: 11 kW. Throughput up to a maximum of 220 kg/h. Briquettes: 150x60 mm. Press dimensions: approx. 2200x3000x1920 mm (LxWxH). Control cabinet dimensions: 500x1250x2120 mm (LxWxH). Weight approx. 3000 kg.

Condition: good (used), functionality: fully functional, SMELT professional Coating line LED/ All machines are used and still working well. Cajdpfxjpyg Its Ab Tsa

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to the Required size or supplied by roll. SILICONE Type: MS-2 Colour: milky white Surface: textured/smooth width (standard): 1680/2000 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700-1750 and 2000 mm rubber: Natural rubber Cjdpfx Abjd S Efaj Teaa hardness: 42°Shore thickness: 2.5 - 4.0 - 5.0 mm temperature range: min. - 20 °/max. +130°C NATURAL RUBBER Special two-part version for Waterbed / oil-presses Type: MNK-2 WB Colour: grey/black Surface: Both sides smooth width (standard): 1700 mm rubber: Natural rubber hardness: 42°/60°Shore thickness: 3,5 - 4 mm temperature range:min. - 20 °/max. +130°C Standard SILICONE Rubber Sheet Type RSS Colour: redbrown or transparent (other colours on request) Surface: both sides smooth Standard length: cut or 10m rolls (other lengths on request) Standard width: 1200 mm - up to 1800 mm on request Polymer: Silicone hardness: 30° - 80°Shore thickness: 0.5 - 10 mm

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Cedpev I D Shofx Ab Tjaa Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table