Used Möller Contactor for sale (234)

Condition: used, functionality: unexamined, Year of construction: 1978, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 400 mm, roller diameter: 622 mm, rotational speed (min.): 2 rpm, rotational speed (max.): 4 rpm, rotational speed (distance/time): 4,900 mm/min, pipe diameter (max.): 254 mm, tube wall thickness (max.): 10 mm, overall weight: 22,000 kg, total length: 3,900 mm, total width: 2,600 mm, total height: 3,300 mm, Equipment: emergency stop, BOLDRINI BSA 40 – Heavy-duty profile bending machine / roll for profiles Hfedpfx Ajzilzvoa Eoi For sale: a heavy-duty industrial profile bending machine, model BOLDRINI BSA 40, manufactured by BOLDRINI S.p.A., Italy. The machine is designed for bending and rolling metal profiles, tubes, angle profiles, rails, flanges, T-profiles, double T-profiles, and other structural elements with a large radius. It is suitable for the production of metal structures, halls, shipbuilding, tubular structures, tanks, flanges, and heavy industrial fabrication. Key data: Manufacturer: BOLDRINI S.p.A. Model: BSA 40 Year of manufacture: 1978 Serial number: 5936 Machine type: profile bending machine / angle bending roll / section bending machine Working system: 3 rollers Control: manual / electromechanical Drive: electric Weight: approximately 22,000 kg Condition: used, stored outside of a production line Available tools: set of rollers, dies, segments, and additional attachments, as shown in the pictures Approximate capacity according to model BSA 40: Angle profile: up to approximately 203 x 203 x 25 mm Tubes: up to approximately Ø254 mm Suitable for: tubes, L-profiles, T-profiles, double T-profiles, rails, flanges, and profiles with a large radius Equipment and features: The machine has a robust, heavy-duty construction, large working rollers, and mechanical adjustment via screw spindles. Working rollers, profile dies, additional segments, and attachments for various types of profiles are available. The electrical panel is present and includes contactors, relays, fuses, a transformer, terminal blocks, and controls. The machine has not been tested under load at the moment. Visible surface corrosion is present on some of the rollers, tools, and housing due to outdoor storage. An on-site inspection and electrical/mechanical check are recommended before commissioning.

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: Hfsdpfx Aewpm I Tea Eji - Underside sanding - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure beam - Electromotive adjustment of the tool thickness with an easily readable digital display - Push-button control with contactor - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Equipment and technical data: - Operator display in the upper control panel - Control panel swivels and extends - Swiveling milling spindle - Swiveling range of the milling spindle: +/- 45° - Milling spindle stroke: 150 mm - HSK80 quick-change system for milling arbors - Milling arbor 30 mm - Electromechanical spindle locking - Table extension 1340 mm on the machine table, extending approximately 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz Hfsdey R Harjpfx Aa Esi - Machine socket - Automatic motor start via contactor control - 7.5 kW main motor, frequency-controlled / stepless speed control - Milling stop type 203 with manual adjustment on both sides - Milling guard and pressure device Centrex type 1624 - Reference dimension setting device ZEROMASTER - Feed unit Wegoma Variomatic 4N: 4-roller feed unit Variable feed speed 2 - 18 m/min Right and left rotation Horizontal and vertical use possible Memo-Lock system for easy swiveling and repositioning Numerical height display Height adjustment from the operator side Large-sized locking levers Maximum overhang 1,050 mm due to extended tube - Dimensions: 260x180x130 cm - Weight: approx. 1100 kg Availability: short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Features and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish sanding • Constant working height thanks to adjustable top section • Working width: 1,350 mm • Overhead sanding, with 2 sanding units • 1st unit equipped with a grooved rubber contact roller of proven hardness Hsdjuhiq Dspfx Aa Esfi • Pneumatically (program controlled) adjustable contact roller; contact roller height continuously adjustable according to a sanding grit scale • 2nd unit equipped with an electronically controlled, segmented sanding pad (segment width 35 mm) and quick-change graphite wear strip • Parallel spring-mounted, ground steel pressure roller at the infeed • Rubber-coated pressure rollers between sanding units and at the outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz, with soft start for reduced current draw during startup • Motorized, fine-adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatically controlled, compressed air consumption approx. 4 l/min • Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt • Fully integrated electrical system with contactor control; automatic star-delta start for the main motor, motor protection, and ammeter for monitoring material removal • Maximum passage height: 200 mm • Sanding belt dimensions: 1,350 x 2,000 mm Comfort features: • Automatic thickness adjustment across the entire working width • Workpiece overthickness protection with immediate feed stop and automatic lift of the machine top section • Continuous adjustment of material removal • Electronic feed rate control at the operator panel, stepless from 3 to 15 m/min • PLC control/programming with color touch-screen and TEACH-IN memory function (store parameters at the push of a button based on sanding results, i.e., no manual data entry required) • Pneumatic conveyor belt tracking control • Workpiece support rollers at infeed and outfeed • Enormatic: Fully automatic quick setup and feed solution • eco*-Energy saving mode • Error diagnosis • Job and operating hour counters • Machine in E-Plus version (RE) Including outfeed table extension, 1,350 mm, foldable, without insert plate Location: Solingen Availability: short-term

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Hsdpfoxxrnbsx Aa Eofi Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: used, mileage: 526,117 km, power: 132 kW (179.47 HP), first registration: 01/2015, fuel type: diesel, empty load weight: 5,991 kg, maximum load weight: 5,999 kg, overall weight: 11,990 kg, tire size: 265/70R19.5, axle configuration: 4x2, wheelbase: 4,850 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 7,200 mm, loading space width: 2,430 mm, loading space height: 2,340 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, onboard computer, power assisted steering, spoiler, tail-lift, traction control, Vehicle location: Bovenden, short wheelbase, 1 air-suspended driver's seat, electric mirrors, heated mirrors, electric window on the left, electric window on the right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, automatic transmission, roof spoiler, differential lock, storage compartment, leaf-air suspension, lashing rails, underbody protection, side aluminum fender, aluminum loading platform, fixed, green environmental badge. Wheelbase: 4850 mm, Body: Möller box body with a 1.5t loading platform BÄR BC 1500 S4-B4, 6AS-800 OD transmission, air conditioning. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Hfedpozhl Utjfx Aa Eoi

Condition: ready for operation (used), Year of construction: 2021, pressing force: 275 t, total width: 2,000 mm, total height: 3,000 mm, overall weight: 13,000 kg, product length (max.): 4,000 mm, Press brake manufactured in 2021. This KNUTH AHK H 30270 features a pressing force of 270 t and a bending length of 3,100 mm. It includes a Cyberlec Touch 8 Controller and a motorized CNC anti-winding system for enhanced precision. The machine is equipped with front support arms sliding on linear guides and a pedal drive for ease of operation. If you are looking to get high-quality bending capabilities, consider the KNUTH AHK H 30270 press brake we have for sale. Contact us for further details. • Loading assistance: Yes • Running hours: 372,4 hours / 36.888 bends • 3 controlled axes: Y1, Y2, X • Controller: Cyberlec Touch 8 • Motorized CNC anti-winding (crowning) system • European clamping tool system • Front support arms sliding on linear guides along the entire length; equipped with T-channels and tilt stops • Rear pusher (backgauge) actuated by servomotor with movement via ball screws and linear guides (X) • Protective guards with electrical contactors • Pedal drive • Workspace lighting lamp Hfedpfezfphfex Aa Eji • CE certification with Akas Laser Manual safety LC II M FMSC • Technical and operating manual • Distance between columns: 2.600 mm • Knife range: 265 mm • Distance between table and upper support: 485 mm • Depth in the console (C): 410 mm • Table height: 950 mm • Y-axis speeds: fast 110 mm/s; bending 9 mm/s; return 100 mm/s • X-axis fast speed: 250 mm/s; X-axis range: 750 mm/s • R-axis fast speed: 100 mm/s; R-axis range: 200 mm/s • Engine power: 22 kW • Oil tank: 350 L Additional equipment • Tooling: Punch height 67 mm; 4V prism 6 x 60 mm Technical Specification Bending Length 3100 mm

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, power: 52 kW (70.70 HP), screw conveyor diameter: 49 mm, machine/vehicle number: DE27566, TECHNICAL DETAILS Capacity: 150 – 250 kg/h Screw diameter: 2 x Ø 49.7 mm L/D ratio: 32D Hsdpfx Aozd Scpea Eofi MACHINE DETAILS Motor power: 52 kW (DC) Control system: analog, contactor-controlled system EQUIPMENT Synchronous motor Degassing Vacuum pump

Condition: like new (used), Year of construction: 2023, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Hjdpfx Asyw Rzaja Ejfi Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - tub capacity: 4.4t - tiltable furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode I - pouring efficiency 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average tub lifespan: 4 – 6 months - furnace equipped with an additional device used to modify liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including bottom-pour stopper - Third group – inductor with power 120 kW, voltage 380 V 50Hz, whose main function is to heat the liquid metal. The inductor is continuously air-cooled during operation. - Fourth group – switchboard with built-in transformer, contactors, and control station. POURING PROCESS The pouring process proceeds as follows: The DISAMATIC 2032 A positions the molds on the conveyor in the correct orientation. The correct position ensures that the open pouring basin in the mold is aligned with the bottom-pour stopper on the bottom of the tub. When the desired position is reached, the operator manually lifts the bottom-pour stopper (using a lever) to fill the mold until the liquid metal is visible in the overflow. The pouring speed of the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer fire-brick lining, where one layer is permanent and the other is expendable. The permanent lining consists of an insulating layer, which is lightweight, burnt stone, and a sillimanite layer. The expendable layer consists of corundum material, i.e., concrete with a high clay content (94%). Both parts are connected by a special cement. The tub inductor is located within a lining made of Al₂O₃ or MgO and SiO₂, depending on the needs. The material used for the bottom-pour stopper is chamotte with varying clay content. The inductor is attached to the pouring furnace with screws and a sealing compound that has adequate plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. tub: approx. 4 – 6 months Hfodpfx Aozfyu Aja Eoi 2. inductor: approx. 12 weeks Ceramics lifespan depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts do not have direct contact with the liquid metal. PRICE *49,000 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are the responsibility of the Buyer; the price includes the following additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, Year of construction: 2011, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors total power requirement 7,2 KVA weight of the machine ca. 450 kg dimensions of the machine ca. 1,8 x 1,5 x 1,9 m Coolant System BMF - BFU 600 8/20 -13 - from CTX beta 800 V4 - universally applicable - controllable via contactors - Includes paper belt filter - Number of pumps: 2 Hfsdpfxjzb N Urs Aa Eji - Pump capacity: 0.75 kW, 2,880 rpm, Q: 2 m³/h, H: 65.2 m, T: 90°C max. 4.0 kW, 2,930 rpm, Q: 4 m³/h, H: 177.7 m, T: 90°C max.

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 3.10 E -Class: 8502 -Price: per piece Hfedpfx Aasd Sp I Aj Eji -Quantity: 23 pieces -Dimensions: 88/49/H75 mm -Weight: 0.4 kg/piece

Condition: new, Spare parts, accessories, and expert support for your GUBISCH machines. Hfsdpfxjzdglgj Aa Eji

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Hfodpfx Aaozargnj Eji Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Dimensions (L x W): 2,100 x 730 mm Note: Water bath and granulator can be purchased for an additional charge.

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner granulators in the C’s series (“C” stands for “compact,” “s” for “silent,” i.e., noise-optimized) offer practical solutions for virtually all challenges associated with the in-line recycling of sprues and rejected parts during the production process. Thanks to their modular design, the C’s series granulators can be easily adapted to specific applications or operational requirements. Depending on the method of sprue feeding, the discharge of regrind, or the specific injection molding machine being used, the Wanner C’s series offers optimal solutions tailored to your workflow through a wide range of standard components. Optimized cutting geometry and low rotor speeds ensure high-quality regrind with minimal dust content, while sound-insulated feed hoppers and a grinding chamber design optimized to minimize structure-borne noise and vibration contribute to low noise levels. The generously sized gearbox ensures a long service life for the granulators while also allowing for extremely compact dimensions. The grinding chamber can be opened quickly and easily—saving time and costs, for example, during cleaning for color or material changes. Advantages of the C’s Series Easy adaptation to specific applications via a modular system Compact design requires minimal floor space next to the injection molding machine Solid cast/steel housing mounted on swivel casters Robust motor/gearbox unit for long service life Significantly reduced noise levels thanks to a staggered-cut rotor and a grinding chamber design optimized for vibration control. Easy operation and cleaning Hjdpozc Nydsfx Aa Esfi of the mill save time and costs Improved intake of bulky sprues and regrind parts due to optimal rotor geometry Grinding chamber with hardened inserts for minimal wear when processing glass-fiber reinforced material High-quality, low-dust regrind achieved through optimized cutting geometry. The co-rotating disc in the side wall reduces friction, thereby minimizing heat buildup and material degradation. Blades easily resharpened without special fixtures Sound-insulated feed hoppers with safety guards Technical Data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20–25 kg/h Screen perforation: 3–8 mm Voltage: 400 V / 50 Hz Collection bin volume: approx. 6 l Suitable for glass-fiber reinforced material (standard) Control system: Contactor control with overload protection switch Electrically redundant design with self-monitoring safety relay compliant with EN 12012 5 m power cable Weight: 155 kg Year of manufacture: 04/2019 Product video "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: new, Contactor, Klöckner Moeller, DIL00AM Hfodpfxjlkcfws Aa Eoi - 5.5 kW.

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Hfsdpfszcxbwsx Aa Eoi Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Year of construction: 2019, condition: new, functionality: fully functional, Root reducer – new (in storage) consisting of: 1. Tapered roller conveyor Plant data: Wood lengths: 2 m to 4.6 m (main length: 2.7 m), extendable to 8 m (optional, at an extra charge) Log diameter: 200 mm to 1,100 mm Wood types: Softwood or hardwood, max. individual log weight 2 tons Piece rate: up to 5 pieces/minute, of which with root reduction: up to 2 pieces Operation: 1-shift operation Dimensions: Length: approx. 5 m Roller width: 800 mm Description: Tapered roller conveyor for roundwood with housing bearing (nominal diameter: 60 mm); Outer diameter of the tapered rollers: 450 mm; drive chain: roller chain 5/4"; integrated 4-arm, hydraulic lifting device for transferring to the root reducer, steel housing plain bearing; drive of the tapered roller conveyor via gear motor with reduction gearbox and soft start; integrated light barriers (2 pieces) for log positioning Hfsdpfxszcaqts Aa Eoi 2. Root reducer Dimensions: Length: approx. 7 m Description: - 3 driven chain beds, drive chain: roller chain 6/4" with square tooth attachment - Drive via gear motor - 2 support blocks with non-driven rollers (roller bearing) - hydraulically pivoting clamping device for clamping from above with V-bed - Drive chain: roller chain 6/4", drive via gear motor; - housing-mounted milling shaft with reversible, interchangeable knife blocks (4 cutting edges per knife block), drive via three-phase motor (drive power: 75 kW; flexible tire coupling) - Star-delta operation for the drive motor (energy-saving mode for idle operation - automatic switchover during the reduction process) - Milling shaft length: 1,200 mm, mounted on a rotatably supported, adjustable drive rocker (hydraulic drive) - 4-arm lifting device, hydraulically driven - integrated hydraulic unit (15 kW) - integrated log diameter measurement for automatic milling time calculation (control unit included in item 2), for wood lengths under 3.5 m, the support position of the log must be adjusted (reduced reduction length) Reduction length for log length of 2.7 m: 0.7 m, for log length of 3 m: 0.9 m 3. Control system - Control cabinets in grounded design, equipped with control units for all drives of items 1 and 2, - Power supply: 3x400 VAC; Rittal control cabinet; motor contactors and contactors from Siemens - Freely programmable controller Bernegger & Rainer - Control cabinets completely wired and tested - Reserve slots for approx. 5 drives - Circuit diagram for the system - Signal exchange via potential-free contacts - Emergency stop system; including necessary sensors; manual operation option Control function description: - Automatic reduction operation, for log lengths under 3.5 m, an adjustment of the support position (wood alignment) is required (reduced reduction length) - Automatic log positioning via the tapered roller conveyor, the reduction process must be activated manually (reduction command) Price: ex works

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 560 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter Hfedswhzmhspfx Aa Eoi - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 650 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System BOSCH REXROTH - BFA 980-50Hz /S/20/8 - very good condition - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 1.7 kW, 2.3 HP, 2,890 rpm, 60 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min Hfodpfxewhzmns Aa Eoi

Condition: used, Year of construction: 2017, liter capacity 980 l Pressure of pump 8 / 20 / 80 bar control Schütze / Contactors weight of the machine ca. 765 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 Hsdpfx Aajx Ak Eys Eofi - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused Hodpfx Aowhzmzea Eefi - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 560 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAN - BFU 980 /S/20+/8 - NEW, unused - universally applicable Hfodpfsx Ak Etex Aa Esi - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 560 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Hjdpfx Aewhzm Uja Ejfi Coolant System MAYFRAN - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Hfodpfx Asy S Auuoa Eoi Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.