Coolant Unit

BMF BFU 600 8/20 -13

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Njdpov Epzvjfx Af Selg Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: good (used), Year of construction: 2016, Contact us for more information Nljdpfey Enr Ssx Af Sjg

Condition: used, Year of construction: 2018, controller manufacturer: Sonstige, controller model: , _____ Nodpfezf T Nmox Af Sslg Description: Year of manuf. : 2018 Control : Sonstige In General: Manufacturer:DMG (Bürener Maschinenfabrik) Year of manufacture:2018 Total number of pumps:5 High-pressure pumps:2 (40 and 80 bar) Filter:Paper belt filter Tank capacity:approx. 980 l

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ Nodpfxswhzmze Af Sjlg - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Year of construction: 2001, condition: ready for operation (used), X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool cabinets and documentation. The main spindle produces running noise. An on-site inspection is possible. Nlsdpfxjzrn H To Af Sog

Condition: good (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 evo Year of construction: 2017 Control: Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Rotational range C-axis: 360° Swivel range B-axis: -5° to +110° Main spindle: Tool interface: HSK-63A Speed range - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: 800 x 700 mm Max. table load: 600 kg Tool changer: Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 50 m/min Operating hours: approx. 36,600 h Spindle hours: approx. 20,350 h Technical features & accessories: - Active cooler - Direct path measuring system in all axes - Full enclosure - Articulated band chip conveyor - Flushing gun - MPC – Machine Protection Control - NC rotary table incl. table cooling - Internal coolant supply 40 / 80 bar, consisting of: - 980 l tank - Purge air for linear measuring systems Nodsz Eby Repfx Af Solg - Bed flushing - Extended chip flushing - Coolant temperature control - Oil and emulsion mist separator, mechanical - Blow-off air through the spindle center - Infrared measuring probe, manufacturer Heidenhain TS 649 - Laser tool measurement, manufacturer BLUM NT - Preparation for 3D quickSET - Preparation for handling system PH 150-8 - Operating mode 4 - Free M-functions Accessories, tools and clamping devices shown in the images are only included in the scope of supply if this is indicated in the additional information. Subject to change and errors in technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Nljdpfx Aez An S Ref Sjg Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: not inspected (used), A short-bar loading system is offered for sale. Manufacturer: Breuning IRCO Nodohpynijpfx Af Solg Type: ILS RBK Approx. 2,200 x 1,000 x 1,350 mm Errors, typos and prior sale excepted.

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min Nsdszk Ek Tepfx Af Sjlg - Filter fineness approx. 3 μm nominal - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar - Drive: 400V, 50Hz, IE3

Condition: new, Technical specifications can be found in the PDF file. Installed special equipment: KL Material slide for sections LS Laserliner CD Saw band tension indicator SD Screw conveyor for chips Nsdoy Tvxcepfx Af Solg HVP 300 CF-NC Clamping force (for both clamping bars) MM Micro-spray system (cooling and lubrication with oil mist)