Used Möller Contactor for sale (234)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE Hfjdszlktpopfx Aa Esi in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Hfodszi Hwfspfx Aa Esi Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Special features: Cabin structure: in a robust steel construction and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet Hfjdpfx Ajzicl Eea Eji The control cabinet contains all contactors and fuses with VPS control

Condition: new, Year of construction: 2022, functionality: fully functional, tank capacity: 700 l, usable tank capacity: 700 l, total length: 1,000 mm, total width: 1,200 mm, total height: 1,470 mm, overall weight: 187 kg, wall material: stainless steel, wall thickness: 1 mm, number of chambers: 1, manhole diameter: 400 mm, manhole location: top, We offer this new Thielmann KB5-GGU storage tank, silo, stainless steel silo. These are new, unused stainless steel bulk material silos. Liquid-tight Product data sheet available Manhole diameter: 400 mm Outlet diameter: 250 mm (DN 25) Minimum wall thickness: 1.5 mm Filling volume: 700 L Weight: 187 kg Stackable (load capacity 1710 kg) Hfsdpsy Aft Uefx Aa Eji Completely made of stainless steel with a slide valve. Total: 350 units available If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) Hjdpjwu Tu Dofx Aa Eofi - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: good (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: Siemens, Sirius Contactor Auxiliary Switch Block Power Contactor -Type: 3RT1045-1AL24 3ZX1012-0RT04-1AA1 -Number: 1x contactor available -Cardboard dimensions: 210/150/H80 mm -Weight: 1.9 kg Hfodpfezh Hplox Aa Eji

Condition: good (used), PTC relays, contactors, semiconductor contactors, relays, isolation amplifiers, temperature transducers Hsdpfxsf Ir D Ao Aa Eofi -Manufacturer: Phoenix Contact, PT100 temperature monitor -Type: MCR-SL-PT100-SP -Price: per piece -Quantity: 7 pieces -Dimensions: 100/13/H115 mm -Weight: 0.1 kg/piece

Condition: used, Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay Hfsdpfx Aasitapmj Eoi -Manufacturer: BTR, motor protection relay type CPW-E12 2 pieces ovp -Item no.: 110 281 05 20 -Voltage: 230V AC -Price/Delivery : complete -Dimensions packaging: 120/80/H50 mm -Weight: 0.3 kg

Condition: used, Relay, contactor, semiconductor contactor, contactor, coupling relay, relay module, interface relay Hfedpjtvhtdsfx Aa Esi -Manufacturer: Phoenix Contact, relay module -Type: EMG 22-REL/KSR-24/21-21 -Manufacturer Part No.:2950323 -Number: 9x relays available -Price per piece -Dimensions: 75/25/H60 mm -Weight: 0.1 kg/piece

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, time relay, safety time relay, safety control, motor contactor, auxiliary contactor, multi-function time relay -Manufacturer: Tele, multifunction time relay -Type: D6DM -Quantity: 1 piece Reiais available -Dimensions: 75/25/65 mm Hfjdpfxstvhtls Aa Esi -Weight: 0.1 kg

Condition: good (used), Contactor, semiconductor contactor -Type: 3RT1054-1AP36 -Type: 3RH1921-1DA11 -Power: max. 132 kW/400V/AC -3 -Number: 3x shooters available -Price: per piece -Dimensions: 210/120/H175 mm Hsdpfx Aaob Nkule Ejfi -Weight: 3.6 kg

Condition: good (used), Contactor, semiconductor contactor, contactor Hfodpfx Ajb A Hdnoa Eei -Max. 30 kW 400 V -Quantity: 3 pieces available Price: per piece -Weight: 1.5 kg

Condition: excellent (used), Schütz, Schütze, Leistungsschütz -Power contactor: 18.5 kW -Coil voltage: 220 AC -Number: 20x shooters available Price: per piece -Dimensions: 85/110/H110 mm -Weight: 1 kg Hfjdpfx Aaeb A Hlfs Eei

Condition: good (used), Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -A1-A2 220 V 50-60 Hz -250 VAC 4 A Price: per piece -Quantity: 25x available -Weight: 0.4 kg Hfodpfxjb A Im Te Aa Eoi

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 18.5 kW 400 V Hsdpfxjb A N Ahj Aa Esfi -Quantity: 1 piece available -Weight: 1.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V Hodpfxsb A N Ake Aa Esfi -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg Hodpfob A N Aljx Aa Esfi

Condition: good (used), Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: 7PU57 20-0AB30 -0.6 s Hfodpfeb A N Rusx Aa Eoi Price: per piece -Quantity: 12 available -Weight: 0.2 kg

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: 3TF42 22-0BB4 -Quantity: 1 available -Weight: 0.7 kg/ Hodpfx Aaob A Rbzo Esfi

Condition: good (used), Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor Hedpfx Ajpxq Uysa Esfi -Manufacturer: Schiele, motor protection relay MSS mecotron 2 C/O unused in original packaging -Article number: 2.430.810.93 -Voltage: max. 250 V / A1/A2: AC/DC 24V -Quantity: 17x relays available -Price per piece -Dimensions packaging: 80/25/H100 mm -Weight: 0.1 kg/pc.

Condition: good (used), Year of construction: 2003, Control unit, control element, interface, contactor Hfodpfjiy R Uasx Aa Esi -Manufacturer: Jungheinrich, Contactor control unit from order picking forklift type: ECE 20 -Type: 5000 7894 -Voltage: 24 V -Dimensions: 150/100/H100 mm -Weight: 1.4 kg

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor Hfsdpfx Aaowx H R He Eji -Manufacturer: Siemens, Schütz power contactor -Type: 3TF54 -Dimensions: 360/145/H200 mm -Weight: 7.6 kg

Condition: good (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2026-1BB40 / 3RH2911-1GA40 -Number: 16 switches available -Price: per piece -Dimensions: 85/45/H150 mm Hfedpjydk Edefx Aa Eei -Weight: 0.6 kg/pc.

Condition: used, Safety relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: SVS11/R-2-24 V -Allow. Operating temp.: -20/+50 °C -Response time: 50 ms Hfedpfxjumzl Ej Aa Eoi -Obstacle size: Ø 50 mm -Fuse: M400 mA -Weight: 2.1 kg

Condition: good (used), Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KZT01 -5-100 s Price: per piece Hedpfx Asb A Rxzoa Ejfi -Quantity: 5 available -Weight: 0.2 kg