Used Möller Contactor for sale (242)

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright, relay contactor -Type: SW180B-3 -Voltage: 24 V -Number: 9x contactors available Fgedpfxey Aty As Albeg -Price: per piece -Dimensions: 122/60/H45 mm -Weight: 0.7 kg/pc.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. Fgjdpfxjh U Rzgj Albjg MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors Fsdpfjwhzmzjx Albogg - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 650 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System BOSCH REXROTH - BFA 980-50Hz /S/20/8 Fsdpfxewhzmno Albjgg - very good condition - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 1.7 kW, 2.3 HP, 2,890 rpm, 60 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: excellent (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, auxiliary switch unused, original packaging Fsdozlxlaepfx Albegg -Type: 3RH1921-1FA22 -Item No.: 3ZX1012-0RT02-1AA1 -Number: 6 switches available -Price: per piece -Cardboard dimensions: 65/50/H45 mm -Weight: 0.1 kg/pc.

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright/Elektron, relay contactor Fgedpfoy At Rujx Albog -Type: SW201-3 -Voltage: 48 V -Number: 5x contactors available -Price: per piece -Dimensions: 155/75/H80 mm -Weight: 1.5 kg/pc.

Condition: used, Contactor, semiconductor contactor, contactor -Power: 37 kW -Volt: 230 V. -Frequency: 50 Hz -Number: ´2x available -Price: per piece -Dimensions: 135/100/H142 mm -Weight: 3.5 kg Fgjdjdngwgepfx Albeg

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, auxiliary contactor Fgjdpfefifk Dox Albjg -Siemens: Type 3RT2027-1CL24-3MAO -Dimensions: 90/50/H145 mm -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: DIL ER-31 -Price: per piece Fgedpfx Alsb A I Easbsg -Number: 8 available -Weight: 0.2 kg/piece

Condition: used, Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: AEG -Type: SH10G.64 Fgjdpfxjd Dpi No Albeg -Number: 3 pieces available -Price: per piece -Weight: 0.8 kg/pc.

Condition: good (used), Contactor, semiconductor contactor, contactor Fgedpjb A Nztefx Albog -110 V 60 Hz -SK: 4120116 -Quantity: 14 pieces available -Price: per piece -Weight: 0.5 kg

Condition: new, As-new, unused electric chain hoists from Liftket. Load capacity: 250kg. Main lifting speed: 18.0 m/min. Fine lifting speed: approx. 4.50 m/min. Number of strands: 1. Hoist group: 3m/M6. Voltage/Frequency: 400V/50Hz. Control type: contactor control. Control voltage: 24V. Lifting height: 125m. Chain type – finish: 5.2x15/EN 818-7-T. Hook version: hook suspension with rubber sleeve. Number of lifting speeds: 2, with emergency stop. Control cable: 2m. Further details available upon request. Fsdpfxey I Upve Albegg

Condition: used, Contactor, semiconductor contactor, contactor, power contactor -Maximum: 22 kW 660 V -Price: per piece -Number: 8x available -Dimensions: 135/85/H115 mm -Weight: 6.5 kg Fgjdpfxjdngwfj Albeg

Condition: new, Year of construction: 2017, SICK S30B-3011BA Safety Laser Scanner Features Design sensor without system connector Indoor application area Protective field range 3 m Warning field range 8 m (at 15 % remission) Distance measuring range 30 m Type of field set Triple field sets Number of field sets 1 Number of fields 3 Number of monitoring cases 1 Scanning angle 270 Resolution (configurable) 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angle resolution 0.5° Response time 80 ms 1) Protective field allowance 100 mm Number of multiple evaluations 2 ... 16, configurable Delay of automatic reset 2 s ... 60 s, configurable Safety characteristics Type 3 (IEC 61496) Safety integrity level SIL2 (IEC 61508) Category Category 3 (EN ISO 13849) Performance Level PL d (EN ISO 13849) PFHD (mean probability of dangerous failure per hour) 8.0 x 10-8 TM (service life) 20 years (EN ISO 13849) Function Restart interlock ✔ Contactor monitoring (EDM) ✔ Multiple evaluation ✔ Contour as reference ✔ Integrated configuration memory ✔ Measurement data output Measurement data output Via RS-422 Secure SICK device communication via EFI ✔ Connection type Connection type System connector with or without connecting cable Universal I/Os 5 1) Inputs Contactor monitoring (EDM) 1 2) Reset/restart 1 2) Stand-by 1 Outputs OSSD pairs 1 Signal outputs 3 3) Type of configuration PC with CDS (configuration and diagnostics software) Configuration and diagnostics interface RS-232 Transmission rate 38.4 kBaud Data interface RS-422 Transmission rate ≤ 500 kBaud Secure SICK device communication via EFI Transmission rate ≤ 500 kBaud Cable length ≤ 50 m Conductor cross-section 0.22 mm² 1) Freely programmable, e.g. contactor monitoring input, reset input, contamination warning, reset required. 2) Availability depends on configuration of universal I/Os. 3) Freely programmable, e.g. warning field, contamination, reset required. Protection class III (EN 50178) EN 60950 Supply voltage Uv 24 V DC (16.8 V DC ... 30 V DC) Current consumption ≤ 0.33 A 1) ≤ 1,7 A 2) Outputs Safety outputs (OSSDs) 2 x 250 mA Fodpfx Ajpudqxslbjgg Signaling outputs 3 x 100 mA 3) 1) At 24 V DC without output load. 2) At 24 V DC with maximum output load. 3) Freely programmable, e.g. warning field, contamination, reset required. Item condition: new, from stock liquidation (Without original packaging). Year of manufacture 2017 Financing through our bank is also possible. komplett-konzept.leasingo.de More scanners - new and used - you can find in our store! International shipping costs on request!

Condition: new, Siemens 3TF53 22-1DB4 contactor, 110 kW, 400 V AC-3, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fgsdpsi Eda Hofx Albeg

Condition: new, Siemens 3TF53 22-1DB4 contactor, 110 kW, 400 V AC-3, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Fgedpfxei Eda Rj Albog

Year of construction: 2019, condition: new, functionality: fully functional, Root reducer – new (in storage) consisting of: 1. Tapered roller conveyor Plant data: Wood lengths: 2 m to 4.6 m (main length: 2.7 m), extendable to 8 m (optional, at an extra charge) Log diameter: 200 mm to 1,100 mm Wood types: Softwood or hardwood, max. individual log weight 2 tons Piece rate: up to 5 pieces/minute, of which with root reduction: up to 2 pieces Operation: 1-shift operation Dimensions: Length: approx. 5 m Roller width: 800 mm Description: Tapered roller conveyor for roundwood with housing bearing (nominal diameter: 60 mm); Outer diameter of the tapered rollers: 450 mm; drive chain: roller chain 5/4"; integrated 4-arm, hydraulic lifting device for transferring to the root reducer, steel housing plain bearing; drive of the tapered roller conveyor via gear motor with reduction gearbox and soft start; integrated light barriers (2 pieces) for log positioning 2. Root reducer Dimensions: Length: approx. 7 m Description: - 3 driven chain beds, drive chain: roller chain 6/4" with square tooth attachment - Drive via gear motor - 2 support blocks with non-driven rollers (roller bearing) - hydraulically pivoting clamping device for clamping from above with V-bed - Drive chain: roller chain 6/4", drive via gear motor; - housing-mounted milling shaft with reversible, interchangeable knife blocks (4 cutting edges per knife block), drive via three-phase motor (drive power: 75 kW; flexible tire coupling) - Star-delta operation for the drive motor (energy-saving mode for idle operation - automatic switchover during the reduction process) - Milling shaft length: 1,200 mm, mounted on a rotatably supported, adjustable drive rocker (hydraulic drive) - 4-arm lifting device, hydraulically driven - integrated hydraulic unit (15 kW) Fsdpfx Aljzcaqtsbogg - integrated log diameter measurement for automatic milling time calculation (control unit included in item 2), for wood lengths under 3.5 m, the support position of the log must be adjusted (reduced reduction length) Reduction length for log length of 2.7 m: 0.7 m, for log length of 3 m: 0.9 m 3. Control system - Control cabinets in grounded design, equipped with control units for all drives of items 1 and 2, - Power supply: 3x400 VAC; Rittal control cabinet; motor contactors and contactors from Siemens - Freely programmable controller Bernegger & Rainer - Control cabinets completely wired and tested - Reserve slots for approx. 5 drives - Circuit diagram for the system - Signal exchange via potential-free contacts - Emergency stop system; including necessary sensors; manual operation option Control function description: - Automatic reduction operation, for log lengths under 3.5 m, an adjustment of the support position (wood alignment) is required (reduced reduction length) - Automatic log positioning via the tapered roller conveyor, the reduction process must be activated manually (reduction command) Price: ex works

Condition: new, Year of construction: 2022, SICK S30B-3011BA Safety Laser Scanner Features Design sensor without system connector Indoor application area Protective field range 3 m Warning field range 8 m (at 15 % remission) Distance measuring range 30 m Type of field set Triple field sets Number of field sets 1 Number of fields 3 Number of monitoring cases 1 Scanning angle 270 Resolution (configurable) 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angle resolution 0.5° Response time 80 ms 1) Protective field allowance 100 mm Number of multiple evaluations 2 ... 16, configurable Delay of automatic reset 2 s ... 60 s, configurable Safety characteristics Type 3 (IEC 61496) Fodpfopudtljx Albegg Safety integrity level SIL2 (IEC 61508) Category Category 3 (EN ISO 13849) Performance Level PL d (EN ISO 13849) PFHD (mean probability of dangerous failure per hour) 8.0 x 10-8 TM (service life) 20 years (EN ISO 13849) Function Restart interlock ✔ Contactor monitoring (EDM) ✔ Multiple evaluation ✔ Contour as reference ✔ Integrated configuration memory ✔ Measurement data output Measurement data output Via RS-422 Secure SICK device communication via EFI ✔ Connection type Connection type System connector with or without connecting cable Universal I/Os 5 1) Inputs Contactor monitoring (EDM) 1 2) Reset/restart 1 2) Stand-by 1 Outputs OSSD pairs 1 Signal outputs 3 3) Type of configuration PC with CDS (configuration and diagnostics software) Configuration and diagnostics interface RS-232 Transmission rate 38.4 kBaud Data interface RS-422 Transmission rate ≤ 500 kBaud Secure SICK device communication via EFI Transmission rate ≤ 500 kBaud Cable length ≤ 50 m Conductor cross-section 0.22 mm² 1) Freely programmable, e.g. contactor monitoring input, reset input, contamination warning, reset required. 2) Availability depends on configuration of universal I/Os. 3) Freely programmable, e.g. warning field, contamination, reset required. Protection class III (EN 50178) EN 60950 Supply voltage Uv 24 V DC (16.8 V DC ... 30 V DC) Current consumption ≤ 0.33 A 1) ≤ 1,7 A 2) Outputs Safety outputs (OSSDs) 2 x 250 mA Signaling outputs 3 x 100 mA 3) 1) At 24 V DC without output load. 2) At 24 V DC with maximum output load. 3) Freely programmable, e.g. warning field, contamination, reset required. Item condition: new, from stock clearance (Without original packaging) Year of manufacture 2022 Financing through our bank is also possible. komplett-konzept.leasingo.de More scanners - new and used - you will find in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to add a pad underneath the multipack. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film; bottle (can or container) size: 0.25 to 1.5 liter, diameter: 50-120mm, height: 120-300mm; max. dimensions for the complete multipack: L(150-720)xW(250-450)xH(120-300)mm; max. speed of the machine in neutral: 45 cycles/min; total dimensions: L6800xW1650xH2270mm, 5500kg; power: 380V, 9kW (machine) and 380V, 63,75kW (shrink tunnel); compressed air: 160 liter/min, 6bar. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fgodsv Nl R Iepfx Albjg

Year of construction: 2025, condition: new, Packaging machine to pack regular shaped objects like stacks of soft fabric oder paper tissues, controlled through touch screen operation and PLC. Including infeed conveyor, no product no bag function, easy change of packaging size. SIEMENS PLC, WEINVIEW Touch Screen, OMRON Relay and Coder, SCHNEIDER AC contactor, PANASONIC servo driver and motor, DANFOSS frequency converter. - Specifications: Bag sizes: L(100-230)xW(100-200)xH(40-100)mm; max. speed of the machine in neutral: 40 cycles/minute; power: 380V, 3.6kW; machine dimensions: L3560xW5885xH1925mm; weight: 3300kg. Fgsdpfx Alsv Nmbbebeg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Packaging machine to pack regular shaped objects like stacks of soft fabric oder paper tissues, controlled through touch screen operation and stepless frequency conversion controlling. Including infeed conveyor, no product no bag function, easy change of packaging size. Proface Touch Screen, OMRON Relay and Coder, SCHNEIDER AC contactor, MITSUBISHI servo driver and motor. - Specifications: bag sizes: L(100-230)xW(100-150)xH(40-100)mm; max. speed of the machine in neutral: 65 cycles/minute., power: 380V, 3.6kW, machine dimensions: L3680xW5885xH1925mm, 3500kg. Fgodpfx Aljv Nmbhsbeg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. without using a tray or a pad. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film; bottle (can or container) size: 0.25 to 1.5 liter, diameter: 50-120mm, height: 120-300mm; max. dimensions for the complete multipack: L(150-720)xW(110-450)xH(120-300)mm; max. speed of the machine in neutral: 50 cycles/minute; total dimensions: L8345xW1460xH2400mm; weight: 5000kg; power: 380V; 6kW (machine) and 380V, 63.75kW (shrink tunnel); compressed air: 60 liter/min, 6bar. Fedev Nl Rzjpfx Albsgg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Packaging machine to pack regular shaped objects like stacks of soft fabric oder paper tissues, controlled through touch screen operation and stepless frequency conversion controlling. Including infeed conveyor, no product no bag function, easy change of packaging size. WEINVIEW Touch Screen, OMRON Relay, SCHNEIDER AC contactor, PANASONIC servo driver and motor, DANFOSS frequency converter. - Specifications: bag sizes: L(100-230)xW(100-150)xH(40-100)mm; max. speed of the machine in neutral: 50 cycles/minute; power: 380V, 3.7kW; machine dimensions: L3560xW5885xH1925mm; 3300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fsdpjv Nmbnsfx Albegg

Condition: new, Year of construction: 2025, High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to build up (NORDSON glue system) and add a tray underneath the multipack. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film; bottle (can or container) size: 0.25 to 1.5 liter, diameter: 55-120mm, height: 120-300mm; max. dimensions for the complete multipack: L(150-720)xW(250-450)xH(120-300)mm; max. speed of the machine in neutral: 50 cycles/minute; total dimensions: L10070xW1650xH2485mm; weight: 5600kg; power: 380V, 13kW (machine) and 380V, 63.75kW (shrink tunnel); compressed air: 160 liter/min, 6bar. Fedsv Nl R Ujpfx Albegg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 73866, workpiece weight (max.): 60 kg, rotational speed (max.): 2,300 rpm, overall weight: 5,000 kg, TECHNICAL DETAILS Module, max.: 7 Grinding worm diameter: 280–350 mm Grinding worm width: 84–104 mm Grinding worm speed (grinding): 1,100–2,300 rpm Grinding worm speed (profiling): 50–95 rpm Number of teeth, min.: 6 Number of teeth, max.: 600 Maximum permissible outside diameter: 360 mm Maximum workpiece weight: 60 kg Maximum grinding stroke: 175 mm Workpiece speed (grinding): max. 250 rpm MACHINE DETAILS Fsdpfxsxvrzij Albegg Machine weight approx.: 5 t Electrical Data Mains connection: 3 × 400 V 50 Hz Machine voltage: 3 × 400 V 50 Hz Control voltage: 1 × 230 V 50 Hz / 1 × 24 V DC Contactor voltage: 1 × 24 V DC Solenoid valve voltage: 1 × 24 V DC