Used Automatic Cutting Machine Esko Kongsberg for sale (77,137)

Condition: good (used), Year of construction: 2021, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2021 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   Iedpfozcng Ajx Aquoau X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Iajdpfx Aszcngcsqueu   Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 008606, Max. panel width: 3000 mm Max. panel length: 1000 mm No of Bottom Units: 5 Iajdpfx Aezcmpcjquju No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008607, Max. panel width: 3000 mm Max. panel length: 1000 mm No of Bottom Units: 6 Iodpszcmn Eofx Aqujau No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Polar 78 X Year of manufacture: 2004 Cutting width: 78 cm Air table with side tables Program Spare blades Isdpfx Aqszdvg Ssujau Lighting units Immediately available

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, STC-Ref: G-071-2423 Polar 78-ES, Year: 1998 format: 0x780 mm equipped with: - safety light beam - photo-cell - rear table guard - datastore for programmes - airtable at left side Ijdszdu N Ejpfx Aqusau - airtable at left side - airtable - monitor

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-1806 POS21, For sale: automatic stacking machine by WEINIG – one of the most respected manufacturers of woodworking machinery in the world. Solid German-built construction, fully operational, in very good condition – ready for immediate use. Technical specifications: Iajdjxzk S Ropfx Aquou Maximum package dimensions: 5 m × 1 m × 1 m Up to 9 spacers per layer Stacking with or without spacers Stacker dimensions: 6 m × 4 m × height 3.4 m Roller infeed conveyor: 6 m, roller width ~30 cm Chain outfeed conveyor: 5 m Total footprint including conveyors: ~12 m × 4 m Conveyors can be directed in any direction (maintaining working axis) Functions & automation: Fully automatic operation Automatic pallet collection after completed stack exits Built-in diagnostic program – fast fault detection and location Handles heavy material without limitations Applications: A versatile machine – suitable for any production line where the product has a rectangular cross-section. Can be installed: behind multi-blade saws in sawmills – boards, planks, battens behind four-sided moulders – planed timber, cladding, weatherboards, flooring behind tenoning/sizing machines – finished joinery and carpentry elements in other industries – wherever the product has a rectangular cross-section Economic benefits: Eliminates the need for multiple workers per shift in the stacking area. An investment that pays for itself quickly in any medium to large-scale production facility. Machine available for inspection on site, can be demonstrated in operation. Additional photos and videos showing the machine in operation are available upon request. Price: 43 000 EUR EXW + VAT

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 10 mm, table length: 3,000 mm, working width: 1,500 mm, Carbonini plasma cutting machine, model Entry, with a working area of 3000x1500 mm. Complete with two Thermal Dynamics current generators. Work performed: - Replacement of the work surface - Replacement of the sliding guides - Management software for handling sheet metal parts Thermal Dynamics CUTMASTER 151 plasma cutter, maximum cutting capacity of 100 Amps, 30 mm. Thermal Dynamics CUTMASTER 51 plasma cutter, maximum cutting capacity of 40 Amps, 12 mm. Iaodpezdrz Sofx Aquju

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Iedpfxst Hmt Io Aquoau Lateral horizontal groups: yes

Year of construction: 2017, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: WJ1525-1Z-SMART JET II-L, I am offering for sale a high-pressure waterjet cutting machine manufactured in 2017. It is a machine that has been used very little and has been regularly maintained – it was originally purchased for a specific project. The project is now complete, and we no longer need it, which is why we are selling it. It was used in packaging technology, so cutting with abrasive materials is not possible. The high-pressure system components are manufactured by H2O (USA) and are part of the FLOW product line. Maximum operating pressure: 4,150 bar Iedpfszdranox Aqueau Cutting table size: 1500 x 2500 x 200 Positioning accuracy: +/- 0.05 mm X, Y axis movement: 20,000 mm/min Cutting speed: max. 16,000 mm/min (material dependent) Control system: PTV 886 CNC

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Iedpfx Ajfh R Tuequoau Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW Ijdpfx Ajfibd Tequeau 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting Iasdpofibfaefx Aquou 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Ijdpfx Asfh R Tyjqueau Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: excellent (used), Year of construction: 2016, Portal plasma cutting system KOIKE MOD. DELTATEX 4000. Useful vertical transversal cut: mm 3,000. Useful vertical longitudinal cut: mm 12,000. Length of runways: mm 14,000. Movement speed: mm/min 24,000. Gantry guide system: X - Y axes, rack and pinion. Type of trolleys installed: 1x Trolley for KOIKE 3D Link plasma support. Numerical Control: KoiKe Katana. Source: KJELLBERG HF 280i. Recommended cutting capacity plasma KJELLBERG HF 280i.: Cooling unit KWE 360. -Vertical plasma: 35 mm (in production) CS/SS. -Maximum vertical plasma breakthrough: 40 mm CS/SS. Iodpfx Aqsv Sua Reujau Visible in operation, excellent condition.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Iaodpfx Aoxdr Swoquju Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 6,000 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Fanuc, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser hours: 6,000 h, laser power: 2,500 W, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 6 mm, LVD LASER ORION 3015 PLUS - 2.5kW Year of manufacture 2013 Iedpfx Aqey Av Nmeuoau

Condition: refurbished (used), Automatic cutting-off machine RAWYLER AWT-5 fully revised with new electrical cabinet SIEMENS. Variation spindle speed and cam Isdpex Tcuqsfx Aqujau Several machines in revision.

Condition: excellent (used), functionality: fully functional, CUTTING , TRIMMING SAW machine for solid wood model MZ PROJECT LC 4000 automatic machine second hand machine CE regulation: YES Iedpozdqxcjfx Aqujau end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. maximum cutting length: mm.4000 motor power: Hp 15 total weight: kg. 3.000 volts: 380/50

Condition: excellent (used), Year of construction: 2013, HORIZON HT-30C, three-knife trimmer, used The Horizon HT-30C is an extremely robust, automatic three-sided trimmer that has earned its place among the most popular book finishing machines due to its exceptional reliability – a quality guarantee that often results in quick sales due to high demand. Iedpjzdqfiefx Aqujau Key features: - Operation: Solo (offline) - Ease of use: Simple operation with easy setting adjustments via the touchscreen - The Horizon HT-30C trims books fully automatically, so the operator does not need to be constantly present. After the books are loaded, the HT-30C signals when unloading and reloading are required after trimming - Memory function: 40 memory locations for recurring jobs - Operation: Stacking and trimming up to 10 copies simultaneously, fully automatically - Durable construction: The HT-30 is solidly built and designed for a long service life Specifications: - Uncut book size: Maximum: 320 x 235 x 51 mm; Minimum: 152 x 136 x 1 mm - Trimmed book size: Maximum: 305 x 230 x 51 mm; Minimum: 148 x 134 x 1 mm - Trimming area: Maximum: 99 mm; Minimum: 2 mm - Pre-stack depth: 300 mm - Speed: Maximum 520 books per hour - Pressure: Maximum 8 kN - Noise level: Maximum 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 18,948 h, machine/vehicle number: A0215A0087, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 75 mm, No minimum price – guaranteed sale to the highest bidder! A maintenance checklist from December 2025 is attached! The defects listed there have been completely rectified (see attached activity report from Trumpf)! TECHNICAL DETAILS Working area X-axis: max. 3,000 mm Working area Y-axis: max. 1,500 mm Working area Z-axis: max. 75 mm Speed X: max. 60 m/min Speed Y: max. 60 m/min Speed Z: max. 60 m/min Simultaneous speed X/Y: max. 85 m/min Sheet metal thickness, steel: max. 12 mm Sheet metal thickness, stainless steel: max. 6 mm Sheet metal thickness, aluminum: max. 5 mm Workpiece weight: max. 575 kg Isdpjzdp Ntsfx Aqusau MACHINE DETAILS Control system: B&R Arnco Laser type: TruCoax 2000 Laser power: 2,000 W Dimensions and weight Footprint (L x W x H): 7,400 x 3,300 x 2,300 mm Transport width: 2,464 mm Weight: 9,000 kg Electrical connection: 65 kVA Operating hours (as of December 17, 2025) Operating hours, laser: 18,948 h Laser beam on-time: 3,635 h EQUIPMENT Closed machine frame with integrated laser head Motion unit for high-precision machining Drives with maintenance-free three-phase servo motors Sheet metal support accessible from both sides Enclosed beam guidance Fully integrated cooling unit Traveling extraction system Collection container for falling parts under the working area Positioning laser diode FocusLine

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: LA398, In very good condition. Iedpfszdp H Eox Aqueau

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 38,762 h, machine/vehicle number: A1240A0214, laser power: 4,000 W, sheet thickness (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Sheet thickness (max.): 15 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 10 mm Iaodpfxozdp Ags Aquju Sheet thickness aluminum (max.): 15 mm Table length: 4,000 mm Table width: 2,000 mm MACHINE DETAILS Laser type: CO2 laser Laser source: TruFlow 4000 Laser power: 4,000 W Power: 77 kW Dimensions & Weight Dimensions: see dimensions in images Total weight: 16,000 kg Type of cooling: Water Operating hours Operating hours: 78,203 h Laser hours: 38,762 h EQUIPMENT Cooling unit

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 78,203 h, control type: CNC control, controller manufacturer: Trumpf, laser type: CO₂ laser, laser hours: 38,762 h, laser power: 4,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 15 mm, table length: 4,000 mm, table width: 2,000 mm, working width: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, power: 77 kW (104.69 HP), type of cooling: water, overall weight: 16,000 kg, year of last overhaul: 2025, Equipment: cooling unit, We offer this Trumpf Laser TruLaser 3040 (L32) laser cutting machine, model TruLaser 3040, in very good condition, year of manufacture 2012. Trumpf Laser TruLaser 3040 (L32), CO2 Laser Year of manufacture: 2012, used by the first and sole owner from new Cutting unit power: 4kW Table dimensions: 2x4 [m] X-axis: 4000 mm Iasdpfjy Rxnusx Aqusu Y-axis: 2000 mm Z-axis: 115 mm Maximum sheet thickness: - Mild steel: 15 mm - Aluminium: 15 mm - Stainless steel: 10 mm Weight: 16,000 kg Rated power: 77kW Closed-circuit cooling system Good condition: optics and resonator system overhauled (2025) and conveyor belt replaced (2026), machine serviced under Classic contract (every 6 months) by authorized Trumpf service Operating hours: laser beam - 38,762 h, machine - 78,203 h CNC control Machine number: A1240A0214 Location: Inowrocław, Poland Price without VAT For any questions or if you need more information, please send a message or contact us by phone. Tel. +48 722 151 062

Condition: used, functionality: fully functional, Usable cutting length: 4000 mm Blade diameter: 450 mm Iasdpfozcf Rxjx Aqusu Pneumatic tilting of the cutting heads: 90-45/20°