Used Toggle Press - Single Column for sale (22,766)

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm Psdpfx Anetrhf Aogsgu hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Pedpfx Ajfim Thongjgu Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t Psdpfxjzl E Sae Angogu ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm Pgsdpfot Ei Hnox Angsu tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Year of construction: 2003, condition: used, Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible. Podpfx Ajz R A Rvsngogu

Condition: good (used), Year of construction: 1988, machine/vehicle number: 053-019/35, Offer 24591 Technical specifications: Pgjdpfx Anjwd Nybsgju - Maximum press force 25 t - Maximum ram stroke 500 mm - Stroke speed 0 - 40 mm/s - Return stroke 0 - 200 m/min - Installation height 800 mm - Throat to ram center 360 mm - Ram clamping area 440 x 360 mm - Ram clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Deep drawing force 10 t - Maximum deep drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg

Condition: used, Year of construction: 1972, pressure 40 t Pgjdpfx Ajztfz Rsngju throat 220 mm stroke 8-88 mm stroke - stepless adjustable 30-140 mm ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: used, Year of construction: 1965, pressure 400 t throat 1140 mm stroke 600 mm table surface area 2000x1000 mm Plate 4000x1000x300 mm ram head dimension 2000x1040 mm Cylinder 300 mm Daylight 650 Pedpjyt R Dlefx Angegu dimensions of the machine ca. 3,9x4x4,2 m Machine has been overhauled. Maximum distance from ram to clamping plate: 1250 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, pressure 2 t throat 150 mm stroke 150 mm Pgedpfx Aotzv Hmsngsu table surface area 310 x 250 mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base - various press accessories

Condition: used, Year of construction: 2002, pressure 80 t throat 300 mm stroke 8-110 mm no. of strokes 100 Hub/min ram - range of adjustment 75 mm Pgedpey I Dd Nofx Angou table surface area 750x590 mm ram surface 540x400 mm hole in the table 200x200 mm table height 780 mm tool hole in ram Ø 40 mm total power requirement 11 kW weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 1200x1700x2700 mm

Condition: used, Year of construction: 1984, pressure 100 t throat 320 mm stroke 138 mm Pgjdpfst Dctrex Angeu table surface area 850 x 550 mm dayligth 385 mm oil volume ca. 500 l ram surface 560 x 450 mm total power requirement 30 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 1,5 x 2,0 x 3,0 m - Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and trunnion clamping piece - Conversion of hydraulics to proportional valve - Conversion of switch cabinet - Electrical travel measurement, Siemens Soft-Start, touch panel The following work was carried out in-house: - Machine was technically inspected - Machine was repainted - Before delivery, a current UVV test with braking time measurement is carried out Machine is safe for manual insertion work on the open mold

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg Pgjdpfx Aow D Awmongsu dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. Pgodpfx Aeu Nfwlsngju *

Year of construction: 1974, condition: used, Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement. Psdpfoz S Iupsx Angogu

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm Pgjdouild Ajpfx Angsu dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm Pgedpfxjlp U Hgj Angju ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Condition: new, Year of construction: 2026, neu 2026 070223 prompt, Zwischenverkauf v Türkei 25700 € 490.87 € 1 15 to 1.4 mm 320 mm 490 mm 130 mm 1 - 40 mm 200 1/min 4 40 mm 30 mm 210 mm 215 mm 1.5 kW 1160 mm 1180 mm 1730 mm 922 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Pedpfx Aewirldongsgu Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm stroke 4 - 80 mm Psdpfx Aotqqxbengjgu table surface area 595 x 410 mm ram adjustment 70 mm no. of strokes 150 Hub/min table adjustable in height 240 mm total power requirement 1,1 kW weight of the machine ca. 1,45 t dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz Psdpfodzqltsx Angsgu - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, pressure 150 t Table dimensions 1000 x 630 mm voltage 400 V Inclineable mechanical press with updated electrics (CE2004) and bolster plates. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Pgjdpfx Aneyqv Ahogsu We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1982, Technical details: pressure: 2,5 t Pjdpfsrdlgisx Angsgu

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Podpfju Nfuqex Angjgu Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm Psdpfx Aev Rgwxjngogu feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Condition: used, Year of construction: 1961, pressure 075 t Pjdpfjzrpp Nex Angogu throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: new, Year of construction: 2019, machine/vehicle number: DF0369, pressing force: 220 t, pressure:220 t passage width:1500 mm stroke:400 mm weight of the machine ca.:5,2 t dimensions:ca. 4000 x 1950 x 2900 mm return capacity:20 t total power requirement:30 kW Max Working height:500 mm :10 mm :10 mm/sec. Return Speed:25 mm/sec speed rapid traverse:10 mm/sec pestle plate:2000 x 400 mm Pedefxyivepfx Angogu table plate:2000 x 600 mm table height over floor:900 mm :500 l Oil cooling (electric):1,5 kW (max) measuring system:TURCK oder Balluff :S7 1500 oder PILZ PSS 4000 Monitor SIEMENS:oder OMRON