Used Double Column Drawing Press -Hydr. for sale (27,702)

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop Hodpfxjw A Amro Ag Uon - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Hedpfx Agov Srfwe Uon Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Hsdjmpfwdjpfx Ag Ujn Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) Hjdpsd E U Nnefx Ag Uen • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Hodpelc N Ryjfx Ag Uen

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Hsdpfslc N R Dox Ag Uen

Condition: used, Year of construction: 2024, pressure 70 t throat 325 mm stroke 800 mm die cushion capacity 35 t Hjdpjvn U Sxjfx Ag Uon drawing stroke 280 mm ejector stroke 240 mm rapid traverse - down 650 mm/sec working feed 58-199 mm/sec dayligth 1050 mm table surface area 900x580 mm ram surface 460x460 mm total power requirement 45 kW weight of the machine ca. 6,3 t dimensions of the machine ca. BxTxH 1000x2200x4000 mm

Condition: used, pressure 160 t throat 360 mm stroke 500 mm Hedpslp U Hgofx Ag Usn table surface area 1250x630 mm ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Condition: good (used), Pressing force 200 to Hsdpfx Aegvz Hxog Uon table: 1500x1000 mm motor: 45 kW weight: 18000 kg Stand width:1500mm dimensions: Machine: 5500x2610x2150 mm

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Hsdpfjgta Rcox Ag Ujn Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW weight of the machine ca. 16 t dimensions of the machine ca. m Hedet Hwpyopfx Ag Uon

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm Hjdpfst Hw E Iex Ag Uon stroke 560 mm total power requirement 33 kW weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm

Condition: used, Year of construction: 1985, pressure 63 t passage width 1350 mm stroke 300 mm total power requirement 16 kW weight of the machine ca. 10 t Hedpfx Ast Hwxuog Usn dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Hodpfsyw Rvqsx Ag Uon Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton Standard configuration Hsdsyw R Adspfx Ag Uen Pin distance 150 mmPin Diameter 50 mm

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t Hodpfju Nfhdjx Ag Uen distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Hodpfxsu Nfino Ag Uen Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1997, Technical details: pressure: 160 t distance between columns: 1000 mm stroke: 250 mm dayligth: 600 mm distance table/ram: 600 mm table height over floor: 550 mm table surface area: 810 x 860 mm clamping surface ram: T x B: 720 x 580 mit T-Nuten mm total power requirement: 15 kW weight of the machine ca.: ca. 16,0 t The machine isn't installed yet. The pictures are from the origin location of the former owner. further details: - sideway passage W: 520 x H: 620mm Hedpfeu Nfmmox Ag Usn - passage front side W:660mm x H: 600mm equipment: - walkable platform arround the machine= height over floor approx. 2400mm, platform approx. 2700 x 2600 x 1050mm - hydraulic pack - oil cooler i.D. *

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm Hsdpfsvt Nvpjx Ag Ujn -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: used, Technical details: pressure: 20 t Hedpeu Nflisfx Ag Uon slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW Hjdou Icxqspfx Ag Usn weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm This press is currently for sale without controls. Optional on customer request completion possible. i.D. Hedpfeu Nfh Dox Ag Uon *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm Hjdpeu Nfibjfx Ag Uon height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Technical details: Hjdpfxou Nfnwj Ag Ujn pressure: 80 t dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm Hsdpfexuv Htsx Ag Uen stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m