Used Ewd Esterer Complete Saw Frame With Sv for sale (25,742)

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Bedpfjyhzhhox Amrswu Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Bsdpfoykr Aqsx Amrowu Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: used, Frame saw Pini & Kay FN65 HH Passage width: 650 mm Drive motor: 33 kW with saw blades with suspension Bwedpoxvz Hzefx Amrju with intermediate shaft with splitter wedge Immediately available Location: Austria, near Graz

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Bjdofk Ew Espfx Amrowu Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, height adjustment type: hydraulic, input voltage: 380 V, passage height: 230 mm, We are offering these two refurbished Wintersteiger DSG 150 ECO frame saws, year of manufacture 2004. Bsdpfxoydfgcs Amrjwu Machine type: DSG 150 ECO Voltage: 380 V Power: 11 kW each Included free of charge is a Tensionmaster for crowning the blades and a set of blades valued at €2,000. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), ALFA LAVAL VELVES COMPLETE PROCESSING SMART UNIT WITH CONTROLL BOX YOM 2015 30 VELVES IN COMPLETE EXCELLENT CONDITION The unit is designed for the automatic safe separation of product flows, the management of different product streams, and the safe cleaning of one line without halting production on the other. Bodpsz Hwhtofx Amrowu

Condition: excellent (used), functionality: fully functional, Base plate for Esterer sash cutters type SS 71 or HD 71 with main shaft and bearings. Bwodpfoth Udmex Amrju Equipped with full and idle pulleys.

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Bsdpfx Ajwu Ez Nemrewu

Year of construction: 1982, condition: ready for operation (used), We offer you frame saws: 1. Frame saw Bogli 71 with infeed and auxiliary car, and distribution device behind the sawmill. Sawmill type: Bogli Marathon 71 Frame: 710 mm, hydraulic sawmill Hydraulic lifting and lowering of the saw blade 55 kW motor Car with auxiliary car, track gauge 90 cm Distribution device behind the sawmill All as shown in pictures no. 1, 2, 3, 4 Price is negotiable. 2. Saw gate Linck E 28-28 Frame stroke 600 mm All as shown in pictures no. 5, 6, 7, 8 Price is negotiable. 3. Saw gate Linck with a loading car and a distribution device behind the sawmill. Saw frame Linck 71 – Frame width 710 mm – Feed rate 12 m/min Bjdpfx Amen I Udxjrjwu – Fully hydraulic: hydraulic shifting of the saws, lowering and lifting of the saw blade Linck hydraulic loading car with additional equipment. Distribution device behind the sawmill (sack, wedge) All as shown in pictures no. 9, 10, 11, 12, 13 Price is negotiable.

Year of construction: 1974, condition: used, functionality: unexamined, For sale: - Circular saw mill, type OS65, from a carpentry/lumber mill in very good condition. - Low operating hours, only approx. 800-1000 m³/year. - Clamping carriage, self-propelled. - Auxiliary carriage. - Approx. 15m of guide rails for the clamping carriage/auxiliary carriage. Bwodpfoz Dn Ulox Amrsu - Splitting wedge/outfeed rollers, not driven. - €20,000 net / plus VAT. The following are also available separately: - Log infeed system - Chain hoist with transverse conveyor Prior inspection is required.

Condition: used, Year of construction: 2000, Used, good condition Make: Schneider Type 2406 Year of manufacture: 2000 Machine no. 910 Bsdpfx Aowkvw Hemrewu CE-certified Cutting height 250 mm Saw blade tiltable between 90° and 30° (60°) Turntable rotatable 180° Motor power 7500 W, 400 V Saw blade diameter 650 mm Cutting height for rip cuts Continuously adjustable from 0 to 250 mm Cutting width adjustment for rip cuts 650 mm by transverse saw movement Motorized tilting with digital display Movable machine stand Automatic saw feed with two-hand control Laser kerf indicator, cross cut Pneumatic workpiece clamping on the right and left New price approx. €25,000.00 Extraction connection 100 mm Space required approx. 2800 mm x 2800 mm x 2000 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on freight, unpacked Handed over in as-is condition, as seen, without warranty or guarantee

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Roller diameter 1200 mm incl. accessories Bodpfxoyr Dbuo Amrewu - Frame saw system Bögli, passage 700 mm - Tensioning carriage, hydraulic with auxiliary carriage - Split wedge Mara, driven - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Can also be dismantled at additional cost.

Condition: refurbished (used), A complete used sawline is available for sale. The first sawing stage includes an edger, and the second stage features profiling machines. All conveyors and components are included. The line will be fully refurbished mechanically; the electrical system is complete but sold as is. Please inquire for pricing and further details. Bedowa Nrpspfx Amrowu

Year of construction: 1990, condition: excellent (used), 1 unit of a mass balancer for reciprocating machinery. Includes complete accessories and mounting parts. Bedpfx Amofm Ev Rerswu Used very little.

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence Bwjdpfeqpdi Uex Amreu immediately available Location: Austria, near Klagenfurt

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, Complete fully automatic sawmill line STORTI year of production 2020 Bodpfxjt H Nm Ro Amrjwu Conditon as new, complete set contain all equipment for installation as steel supports, communication walkways, air compressor with whole installation. Machinery set: - Chainbelt log loading station - Multiprisma Storti MP350 - Belt transporting/sorting station - Chainbelt transport to multiblade saw - Multiblade saw Storti MP350 - Double saw with automatic positioning Storti RM500 Whole line is fully equipped for immediate production start

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Bwodpfx Asg U Uv Remreu Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Bjdeikvliepfx Amrowu Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE SAWING LINE - VTZ 1400 PLUS log band saw with BM 900 chipper canter, including all necessary conveyors - FRC chipping edger with 3D scanning and optimisation, including all necessary conveyors - Automated stacking machine Bwedpfsxlym Eox Amreu - Waste conveyors

Condition: used, type of input current: three-phase, cutting length (max.): 6,000 mm, cutting height (max.): 650 mm, roll diameter: 700 mm, saw drive: 27,200 W, input voltage: 380 V, conveyor belt speed: 30,000 mm/s, Equipment: documentation/manual, For sale: used but well-maintained automated wood cutting line NG-700L, manufactured in Lithuania. The machine has been lightly used and is still connected; last time it was operated about a year ago and worked without issues. Bsdpjw N S S Aefx Amrewu The line is offered complete with: log loading ramp, receiving and sorting table, auxiliary outfeed table (roller conveyor), control cabinet, detailed technical drawing and leg layout scheme for relocation. Technical specifications: Log length capacity: 2.5 – 6 m Max. log diameter: 65 cm Saw wheel diameter: 700 mm Saw linear speed: 30 m/s Productivity: 1.5 – 3.0 m³/h Rated supply voltage: 380 V ±19 Maximum power consumption: 27.2 kW Log clamping and turning: hydraulic Dimension setting: programmable Line operation: operator console Additional information: The equipment is in good condition and ready for further use. Full documentation and drawings are included to facilitate transport and installation.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Complete Kara Master sawmill Year of construction 1996 CE mark The sawing line consists of 2 Kara Master 08M sawing machines 1 Kara edger Technical data of the KARA MASTER machine Motor: 37kW / 1500 rpm Hydraulic unit: 5.5kW / 1500 rpm / 50 Hz Transfer table 9.5 m long, 0.7 m wide Weight, kg approx. 4900 kg Saw blade diameter 800-1200 mm (with undercarriage 800...1100 mm) Cutting height: 295...495 mm Recommended speed for the saw blade diameter 800mm 1300r/min 900mm 1170r/min 950mm 1100r/min 1000mm 1050 rpm 1100mm 960r/min 1200mm 880 rpm Diameter of the blade hole: 50 mm Bwedpfx Amjum I S Eorju 015 mm, distance from blade hole 50 mm 9 m x 660 mm Additional equipment Pump: 34 l/min, 150 bar (blade shaft speed 1100 rpm) 180 bar from the tractor hydraulics (only in mobile) Stepless feed 0...130 m/min Kara Pro 200 control unit Programmable up to 120 sizes in steps of 0.1 mm. Programming addition during sawing, storage of the last dimension used. 9 Feed speed, m / min infinitely variable 0-130 m / min Kara Edger Type 32-250 Year of construction 1996

Condition: excellent (used), Year of construction: 2024, We offer for sale a heavy-duty double-blade angular saw type D9, designed for efficient processing of hardwood logs up to 4 m length. The machine is in very good condition and is supplied as a complete line including clamping wagons, conveyors, sorting system, and operator control cabin. Key Features & Benefits Double-blade angular cutting system (horizontal + vertical saw) Designed for hardwood processing High-performance industrial solution Smoothly adjustable feed speed Complete technology line including conveyors and sorting Includes operator control cabin Energy-saving system with braking energy recovery Technical Specifications Cutting System Saw blades: 2 × 500 mm (horizontal + vertical) Saw head power: 2 × 22 kW Blade speed: approx. 2,900 rpm Max. cutting section (angular): approx. 180 × 180 mm Material Capacity Log diameter: approx. 100 – 800 mm Log length: approx. 2,000 – 4,000 mm Processing line for logs up to 4 m Feeding & Handling 4 clamping wagons, each with clamp and rotator 1 transport wagon with travel motor (approx. 30–32 kW) Adjustable feed speed up to approx. 120 m/min Horizontal compensation of tapering Hydraulic system with lubricated track and wagons Drive & Power Main motors: 2 × 22 kW Saw head feed servo (X axis): approx. 5.5 kW Clamping tower servos (Y axis): 5 × 5.5 kW Travel motor: approx. 30–32 kW Hydraulic unit motors: 5 × 3 kW Total installed power: approx. 135 kW Control & Equipment Operator control panel 2 laser guides Remote access system Measurement of power consumption Hydraulic heating function Electric cabinet heating Conveyors & Line Equipment Infeed system: 2 × infeed conveyors, each 6 m long Heavy-duty 3-chain construction Integrated log handling and transfer system Chip extraction belt conveyor (cutting waste removal) Outfeed system: 1 × single-sided tilting conveyor for waste 2 × sorting conveyors for processed timber (both sides discharge) Sorting System Extraction Requirements Required extraction capacity: min. 8,000 m³/h Connections: 150 mm + 2 × 200 mm Dimensions & Weight Machine length: approx. 36,500 mm Machine width: approx. 3,000 mm Machine height: approx. 3,000 mm Total weight: approx. 13,500 kg Condition & Sale Terms Condition: Very good Fully operational industrial line Sale includes control cabin Dismantling and removal to be arranged by the buyer Advantages Complete production line High productivity for hardwood processing Strong and reliable industrial construction Bwedpszgtfqsfx Amrsu Precise cutting and stable output Efficient handling with integrated conveyors and sorting

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Bwedpfx Amoyam Exsrsu Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben

Condition: good (used), The Esterer SS45 complete gate saw has undergone a complete technical overhaul. Only the appearance of the gate is no longer in optimal condition. Passage width: 45 cm Speed: 340 rpm Stroke: 500 mm Includes complete mounting, saw blades, and templates Features hydraulic blade lifting Bwodpfxofvb Ete Amrsu Includes a splitting wedge Drive power: 30 kW Includes hydraulic unit Includes complete control cabinet Please also check my other listings. I look forward to your inquiry.

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Maximum feed width: 70 cm 0-line on the left Bwjdpfxjzl N Tnj Amrou Adjustable saw blade on the right Immediately available Location: Austria, near Ried im Innkreis