Used Atm Okf Lsl 15130 for sale (486)

Condition: used, Year of construction: 2004, Force Presscylinder: 4000 KN Dkjdolhqc Nspfx Al Aju Steel, Gush: 4-6 to/h Aluminium: 3-4 to/h Driving Power: 1x22 kW Arrangement Surface 7x4, 2x4, 1 mxm Machnie weight: 23 to Place: Austria Available immediately

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Dkedpfx Alsvvki Nj Aou Storage location: Nattheim

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts and optional external network connection. ● Optimized cleaning by comparing input/output, which extends cleaning intervals and saves operating costs. ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heater. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Dedjidx Uijpfx Al Aoku Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: not inspected (used), Year of construction: 2005, Scraper conveyor: 5m Width: 0,55 m Height: 0,5m Inner width: 0,38m Carrier divide: 500mm Belt incline: 30° Drop height: 2,5m with swivelling slewing ring without engine Dkedpfx Asd H Twisl Aju

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Dsdpfx Aljz E Rv Ue Aoku Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Dkodpfx Alszmap No Asu Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Year of construction: 2022, condition: like new (used), functionality: fully functional, For sale ATMS WaterJet 2015-B waterjet cutting machine with a working area of 2000 × 1500 mm. The machine was purchased brand new and installed in March 2022. It was purchased with EU funding for laboratory use, but was used only once during installation, for testing purposes. The actual operating time of the machine is approximately 5 working hours. Reason for sale We are engaged in research and prototype development. In practice, it turned out to be easier and more cost-effective to cut metal parts using other available equipment, therefore the machine was not used further. Technical condition • very good technical and visual condition • complete machine • stored in industrial conditions Dedjx Rqycopfx Al Asku • full technical documentation available Main technical data • Working area (X × Y): 2000 × 1500 mm • Z axis travel: 200 mm • Nominal power: 37 kW, 400 V / 50 Hz • Maximum pressure: 410 MPa (60,000 psi) • Drives: servo • Control system: CNC (NC-Studio, PC with Windows OS) • Supported file formats: G-code, DXF, NCE, NC, CNC • Maximum feed rate X/Y: 15,000 mm/min • Cutting speed: 10,000 mm/min • Automatic abrasive feeding system (200 L) • Laser positioning system • Manual head tilt adjustment up to 45° • Water treatment system • Oil cooling system with fans Price: to be agreed Location: Poland / Mazowieckie region

Condition: good (used), Year of construction: 2005, PureWaterPlant / Pharmaceutical water treatment plant Make: LETZNER 400 ltr. / h Dksdpsmfnv Sefx Al Aeu with tank, piping, control box, etc. with operating instructions, etc.

Condition: used, Year of construction: 2023, Overview Compact tabletop canning system built by the US manufacturer Wild Goose Filling in 2023. The Gosling fills and seams beer and other beverages in 330 ml and 440 ml cans with 202 CDL ends at up to 720 cans per hour (330 ml). The CE version for 230 V single-phase supply comes with pre- and post-rinse and the DO hood with CO2 regulation for low oxygen pickup. The machine is still installed and can be seen in production on request. Technical data - Manufacturer: Wild Goose - Model: Gosling - Year of manufacture: 2023 - Output: up to 720 cans/hour (330 ml), 12 cans/minute - Filling heads: 1 - Can formats: 330 ml and 440 ml, body diameter 211 - Can ends: 202 CDL - Electrical supply: 230 V single-phase, 50 Hz - Compressed air: 185 L/min at 6.5-7.0 bar, clean and dry - CO2: 0.8-1.7 bar - Dimensions: 112 cm L x 66 cm W x 104-109 cm H - Weight: 125 kg - Configuration: tabletop system with adjustable leveling feet, enclosed stainless-steel structure - CE-marked Equipment - Pre- and post-rinse assemblies - DO hood with CO2 regulation (DO Buster CO2 tunnel) - Quick-change system for can bodies of different heights Dodpfx Alsz Iy Ape Asku - Automated CO2 purging and foam control - Seaming station for aluminum and steel cans, lid chute for hands-free lid placement - Full-color touchscreen with recipe pre-sets, alerts and auto-testing functions - CIP/SIP automation - Seam check tools (metric) Condition Used, in working order and still installed. The machine can be visited in production on request. Dismantling, handling and truck loading are included. Availability Available immediately. Location: France.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Dkodez I Iv Rspfx Al Aeu Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Dkedpolhqd Rjfx Al Aou Aviable: 30.01.2025

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dedpfszt Sb Dox Al Ajku Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Year of construction: 2023, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Typ / Modell: NF-LC-M 500, Type / Model: NF-LC-M 500 Laser power: 500 watts Spot mode: Multi Water-cooled Max. pulse energy (mJ): 15 Working distance / scan width: 185 – 438 mm / 105 – 300 mm Dksdpfozq H Uaox Al Aou 20 µm rust removal (m²/h): 13.9 20 µm oil contamination removal (m²/h): 15.3 20 µm paint / coating removal (m²/h): 10.5 5 µm galvanized sheet removal (m²/h): 2.0 Removal of surface contaminants (m²/h): 16.2 Automotive paint removal (m²/h): 2.2 Power consumption: 3 kW Voltage / Hz: 230 V / 50 Hz Dimensions (cm L x W x H): 95 x 61 x 103 Weight (kg): 177

Condition: refurbished (used), Force pressing cylinder: 2 x 1100 kN Capactiy cars: 30 -40 p/h Bale dimensions: 3,9 x 1,9 x 0,4 m x m Loading height: 1,32 m Cycle time: 60 s Power: 22 kW Weight: 22 t Dimensions: 7,5 x 2,8 x 3,0 Manual operation Dkedohgibhepfx Al Aou Mobile unit

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) Dedpfjyz Dhzox Al Aoku 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Djdpfxswmm U Us Al Aeku

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Reverse osmosis plant. Inlet pressure: 3 bar. Capacity: 4 m³/h. Power: 34 kW. Maximum pressure: 55 bar. Equipped with Grundfos pumps, frame, stainless-steel piping, pretreatment system, tanks and control panel. Serial No.: 2005118. Dsdpszvchaefx Al Aeku

Condition: used, mileage: 430,000 km, power: 206 kW (280.08 HP), first registration: 11/2015, fuel type: diesel, number of seats: 42, gearing type: automatic, emission class: euro6, color: silver, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, MAN A21, Euro 6, with new ATM New design!! * MAN engine 206 kW Euro VI, ATM (0 KM) * Automatic transmission * ABS, ASR * Auxiliary heater * Large air conditioning system * 39 + 1 seats * 43 standing places Dkjdpeyn Up Isfx Al Aeu * Folding seats * 1+2 double-width doors * Wheelchair / pram space * Kneeling feature * Lift/lowering function * LED matrix on 3 sides with control unit * Retarder * Fog lights * Electrically adjustable, heated exterior mirrors * Driver’s seat air-suspended, 3 air cushions, rotatable, with seat heating & ventilation * Bus stop brake * Stop request buttons * Ticket changer mount * Handrails * Roof hatches All details are without guarantee. Errors and omissions excepted. Further info: also on WhatsApp Info in Polish: WhatsApp Your French-speaking contact: Georges Spengelin

Condition: used, High-capacity industrial water treatment, filtration, and pressure boosting plant. This comprehensive system is composed of premium-tier components, primarily powered by high-efficiency Grundfos pumping stations and modular multi-port filtration vessels.The system is suited for manufacturing facilities, municipal water networks, food & beverage industries, closed-loop cooling systems, or large commercial properties. The Package Includes: 1. High-Pressure Vertical Multistage Pumps:Grundfos CR15-12 A-F-A-E-HQQE (Quantity: 1 units) 2. End-Suction Centrifugal Pumps:Grundfos NBE40-160/158 A-F2-A-BQQE ((Quantity: 4 units on the pallet) 3. Filtration & Water Softening Unit:Multi-cylinder battery consisting of large blue composite pressure vessels (FRP tanks) for media filtration, iron removal, or water softening. 4. 2 units x Grundfos (Vertical Multistage Pumps). Condition: Used, as shown on photos. Stored in a dry indoor facility. Dkedpfez Ahh Sjx Al Asu

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Key Features: Dedpfxszi N Dhj Al Asku Suitable for powder coating and surface treatment lines Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) The system is in good working condition and can be inspected while operational by appointment. Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

Condition: used, mileage: 908,645 km, power: 265 kW (360.30 HP), first registration: 07/2014, fuel type: diesel, number of seats: 48, gearing type: automatic, next inspection (TÜV): 03/2027, emission class: euro6, color: red, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Vehicle in clean condition * No defects – ready for immediate use * Euro 6 engine * Replacement engine installed at 509,364 km * Replacement gearbox installed at 709,990 km * Air conditioning for passenger compartment * Stroller space * Wheelchair ramp at door II * LAWO matrix display (front/side/rear) Dksdsz Acacepfx Al Aju * 48 seats * 43 standing places * TÜV/emission test can be renewed upon request * Subject to errors and prior sale

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. Dedpfoy A Trljx Al Ajku If you have any questions, please feel free to contact me.

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Dkodpfxsu A Tf De Al Aou Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Few hours of use

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Dkjdpfxjzvghks Al Aju

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, Cleaning system that is the ideal solution for cleaning a wide range of parts with complex shapes; 2 units available. Dksdpfxjy D Rh Ho Al Aeu