Vertical lathe

MAG DVT 250

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: Bjdpfjytpbiox Amrodh - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, total width: 2,500 mm, total length: 4,500 mm, total height: 3,200 mm, Offered is a double spindle pick up turning machine VSC 250 DUO. There are 2 nearly identical machines available. Each machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The VSC 250 DUO will receive a general overhaul before delivery and gets a control upgrade to Siemens Sinumerik ONE. The machine can be equipped with other periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens Sinumerik One TECHNICAL DATA workpiece diameter: max. 250 mm workpiece height: max. 150 mm chuck diameter: 250/315 mm swing diameter: 350 mm X-stroke: 745 mm Z-stroke: 300 mm TOOL CARRIER working area 1 1x EMAG disc turrets, 12x VDI 50 without driven tools Bsdpfx Amer Nc Ufersdh working area 2 1x EMAG disc turret, 12x VDI 50 with driven tools Price, delivery time and equipment of the machine on request.

Condition: like new (used), Year of construction: 2021, Offered is a double spindle pick up turning machine VSC 500 DUO. The machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The machine can be equipped with various periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. Bodpfxot Du Tdj Amrsdh COTROL Siemens 840 Dsl TECHNICAL DATA workpiece diameter: max. 440 mm workpiece height: max. 250 mm chuck diameter: 450 mm swing diameter: 550 mm X-stroke: 925 mm Z-stroke: 400 mm TOOL CARRIER 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time and equipment of the machine on request.

Condition: good (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 evo Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Rotary range C-axis: 360° Swivel range B-axis: -5° to +110° Main spindle: Tool interface: HSK-63A Speed range - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: 800 x 700 mm Max. table load: 600 kg Bodpfx Amoz Eby Rjrsdh Tool changer: Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 50 m/min Operating hours: approx. 36,600 h Spindle hours: approx. 20,350 h Technical features & accessories: - Active cooler - Direct path measuring system in all axes - Full enclosure - Articulated belt chip conveyor - Coolant nozzle - MPC – Machine Protection Control - NC swivel rotary table incl. table cooling - Internal coolant supply 40 / 80 bar, consisting of: - 980 l tank - Purge air for linear measuring systems - Bed flushing - Extended chip flushing - Coolant temperature control - Oil and emulsion mist separator, mechanical - Blow-off air through the spindle center - Infrared measuring probe, manufacturer Heidenhain TS 649 - Laser tool measurement, manufacturer BLUM NT - Preparation for 3D quickSET - Preparation for handling system PH 150-8 - Operating mode 4 - Free M-functions - Automation, manufacturer Zero Clamp Zerobot 100P Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 1,337 mm, turning diameter: 420 mm, General Control: Siemens 828 D Turning diameter: 420 mm Turning length: 1,337 mm Swing diameter: 700 mm Bar capacity: 89 mm Rapid traverse speed: 20 / 10 / 24 m/min Main spindle Bar capacity: 89 mm Chuck size: 305 mm Speed: 2,500 rpm Spindle power: 22 kW Spindle torque: 1,050 Nm Sub spindle Speed: 4,000 rpm Spindle power: 12 kW Spindle torque: 122 Nm Tool turret Technology: 12 stations Tool drive: 5,000 rpm Power: 9.4 kW Torque: 90 Nm Tool holder: BMT-65 / BH Travel X: 280 mm Travel Y: 120 mm Bodjx Ag Hmjpfx Amrodh Travel Z: 1,390 mm Equipment Chip disposal: chip conveyor Coolant capacity: 240 liters Tool measurement: measuring arm in the working area Part discharge: parts catcher Bar feeder: prepared

Condition: good (used), Year of construction: 2006, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: M086, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, spindle motor power: 22,000 W, Vertical turret lathe with CNC Control: FANUC Series 18i-TB Number of turrets: 1 Bsdpetmq Ukefx Amrodh Number of tools stations: 12 Chip conveyor: 3508734 Boring bar holder: dia. 50 mm The machine is still under power.

Year of construction: 2010, condition: ready for operation (used), - USED - CNC DOUBLE RAM VERTICAL LATHE MAX ROTATING DIAMETER: 3000 mm MAX TURNING HEIGHT: 800 mm MAX TURNING DIAMETER: 2800 mm SPINDLE: 1-160 rpm; 71-114 kW; 68500 Nm; 2500 mm X-AXIS TRAVEL: -150+1780 mm Z-AXIS TRAVEL: 900 mm RAPID FEEDS X-Z: 8 - 10 m/min Bedpoyyrh Hjfx Amrodh TOOL MAGAZINE: BASKET-TYPE ; TYPE CAPTO C5; 24 POS. POS CONTROL UNIT: SIEMENS 840D MAX ADMITTED LOAD: 15000 Kg WEIGHT: 54000 Kg ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; AUTOMATIC DOOR ; HEAD COOLING SYSTEM ; PORTABLE HANDWHEEL ; TOUCH PROBE

Condition: new, Year of construction: 2021, functionality: fully functional, turning diameter over cross slide: 1,000 mm, spindle bore: 110 mm, turning diameter: 1,300 mm, center height in crank: 710 mm, center width: 890 mm, turning length: 6,000 mm, total length: 11,920 mm, total width: 3,600 mm, total height: 2,760 mm, spindle speed (max.): 1,000 rpm, CNC LATHE GURUTZPE GL 13 (BRAND NEW) TECHNICAL SPECIFICATIONS CNC lathe GURUTZPE Model GL13.10.6 CNC FAGOR 8065 Distance between centers: 710 mm Maximum turning diameter over carriage: 1000 mm Maximum turning diameter over bed: 1300 mm Distance between centers: 6000 mm Maximum load between centers without steady rest: 10 tons Automatic turret, 4 positions – Baruffaldi 265 Manual chuck: 800 mm X-axis travel: 675 mm Z-axis travel: 6000 mm Bar capacity: 110 mm Spindle speed: 0-250 / 0-1000 rpm Main motor power: 28 / 34 Kw Rapid traverse: X-Y-Z: 8000 mm/min Footprint dimensions: 11920 x 3600 x 2760 mm Approximate total weight: 17,000 kgs PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST. Bjdpszqfi Njfx Amredh

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Maximum turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Bodpfxeyx U Its Amrsdh Forklift available for loading the machine! Machine price: €31,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €38,500 excluding VAT This machine is available for inspection in Genk!

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Bedpfxjxxpbxj Amredh Type of control: CNC-Steuerung Control: FANUC Series 18i-MB Storage location: Halberstadt Country of origin: Taiwan X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Further information: 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment.