2-axis positioner

Z.TT2A500

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We inform, that we currently only sell or deliver to the Rbsdpfx Aexmgwaohzst D-A-CH and Be-Ne-Lux countries. We ask for your understanding

Year of construction: 2021, condition: used, KR Quantec 6-axis robot incl. KRC4 controller and robot control panel 12m Smart Pad, 3100mm reach, 20kg payload External axis module for coupled rotary axis, mathematically coupled Rbsdpswgn Dwjfx Ahzet Kuka ArcTech Basic Package + Level 2 advanced TouchSense technology to minimize component tolerances Kuka Wiresense module During oscillation, the voltage is measured by the power source and thus, in the event of component distortion, the welding path is shifted. * Function only for fillet welds Includes Lorch S5 SpeedPulse XT welding machine Includes automatic torch cleaning station *Cutting device *Milling cutter *Welding separation spray

Year of construction: 2023, condition: new, Sell alligator shears ,cable shears , also for metal. Model AS/250 Max. Cutting force 250 kN Cutting length 300 mm Max. Opening 160 mm Rbsdpfoku Ag Sjx Ahzot Hyd. Pressure 15 MPa Full cycles p. minute 10-15 ×/min. Power consumption 5,5 kW Weight 450 Kg Size (L×W×H) 1200 × 980 × 1200

Condition: new, Year of construction: 2024, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Rodog Tdpgjpfx Ahzsbt Hand and foot remote control with speed display very robust

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Protec KT 2000 HV, Hydraulically height adjustable Load 2000 KG Rbodoncfvhepfx Ahzet Manual remote control with digital display Double foot remote control Height approx. min. 800mm tilted to middle , height max. 1400mm Height min. horizontal 1000mm diameter faceplate 1200mm Tilt angle min. 135 Speed 0,05 to 0,9 rpm. Motor power 3 KW

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series. Models: S-3560, S-3511, S-3513, S-3516. -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation. -Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width. -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm S-3516: (width not specified) Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg. S-3513: 14.000 kg. Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm. Rbsdpfx Ashwb Utohzjt S-3511: 2,485 × 1,585 × 1,820 mm. S-3513: 2,695 × 1,585 × 1,820 mm

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry Rbjdpfx Ahsmn Rcqezst • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. Rjdpfxemk S Sls Ahzebt In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 22,351 h, control type: CNC control, degree of automation: semi-automatic, laser source manufacturer: Trumpf, laser hours: 17,317 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 115 mm, repeat accuracy: 0.03 mm, type of cooling: water, overall weight: 12,000 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, For sale: TRUMPF TruLaser 3030 with LoadMaster automation Machine installed in June 2021. Rsdpfx Ajwya Twehzobt Serviced exclusively by TRUMPF Slovakia, with professional maintenance performed regularly every six months. Machine in excellent condition, equipped with LoadMaster automation. Sheet metal cutting up to 25 mm thickness. Type and power of resonator: CO₂, 4 kW. Maximum working area: 3000 × 1500 mm. The machine will be in operation until the end of December 2025; inspection in full operation is possible at any time. Full service history documentation will be provided.

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Rbjdod Dhw Nopfx Ahzjt