Manual aluminum circular saw

UK 300 M

Year of construction: 1940, condition: used, Automatic universal gear hobbing machine for manufacturing spur gears and helical gears. Largest milling diameter: 120 mm Smallest milling diameter: 5 mm Smallest tooth pitch: Module 0.30 Hodpskw T Rmsfx Aahjp Largest tooth pitch: 2 mm Largest milling length: 100 mm Complete with all accessories.

Condition: new, plate thickness 1,6 mm 4 t blade length 156 mm angle adjustable from - to fest Grad Hodpfx Aeftd Uaoahop table surface area 450m x 305 mm total power requirement Handbetrieb kW weight of the machine ca. 95 Kg Dimensions (LxWxH) 530 x 380 x 480 mm

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Hjdpfx Aoxyh Hvoahsp Rapid traverse: 6000 mm/min

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Hodpfx Aasxwmbmshsp

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cap Hodpsrh Dkysfx Aahep - documentation - 400V

Condition: excellent (used), Year of construction: 2008, Technical data: Working length: 6100 mm Distance between columns: 5230 mm Press force: 400 tons CNC control: OPERATOR II graphic TFT screen 14" Number of controlled axes: 8 Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Stroke: 350 mm Overhang: 420 mm Motor power: 38.5 kW CE marking Dimensions (length x width x height): approx. 6300 x 2500 x 3600 mm Weight: approx. 36.5 tons Note: Table extends approximately 450 mm into the floor. Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Very good condition Only 9,200 operating hours In the meantime, we have stored the machine and removed the table. Hedpfx Aaoy D Sb Ujhjp The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are in accordance with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm Hjdpfjxzuz Nex Aahop Control Heidenhain 355 weight max. 10 t ja more pictures available

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) Hsdpeu Hl R Tofx Aahop AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Hjdet Hwucjpfx Aahjp Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO - Tungsten carbide saw blade Ø 300mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system Hjdjf Nwxwopfx Aahsp - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes