Round wooden cross conveyor

QF

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 4512 31727.01, Machine for spot-welding wire onto tube. Hfjdpfx Ahoytykhovjd

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Hfodpfx Ahev Hwk Uovsd Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: used, This listing is for 1 of 2 QuattroFlow QF15ACUEGN-UK Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The QuattroFlow QF150 Diaphragm Pump is an efficient, 4-piston pump designed for handling water-like fluids in various sectors, including pharmaceuticals, biotech, food, and cosmetics. Here’s a detailed overview of its features, specifications, and applications: Key Features: Flow Rates: Max Flow Rate: 3° Eccentric Shaft: Up to 100 l/h (1.67 l/min) 5° Eccentric Shaft: Up to 180 l/h (3 l/min) Min Flow Rate: Both shaft angles start at 1 l/h (0.017 l/min). Pressure Ratings: Maximum operating pressure of 6 bar (87 psi) for fluids < 40°C; 4 bar (58 psi) for fluids > 40°C. Temperature Ratings: Maximum fluid temperature: 80°C (176°F). CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable up to 90°C (194°F) and 130°C (260°F), respectively. Suction Lift: 3° Shaft: 1-1.5 m (3.2-4.9 ft) 5° Shaft: 2-3 m (6.6-9.8 ft) Volume Specifications: Approximate volume per revolution: Hjdpfjxxz Iqjx Ahvofd 3°: 0.72 ml 5°: 1.2 ml Total filling volume (without connectors): 15 ml. Material Construction: Wetted Materials: SS316L (pump housing, valve plate), Santoprene (diaphragms), EPDM (valves, O-rings). Non-Wetted Materials: SS316L for bearing housing and base plate. Dimensions and Weight: Length: 257 mm (10.2 in); Width: 164 mm (6.5 in); Height: 185 mm (7.2 in); Weight: 9.8 kg (22 lb). Slight variations in dimensions and weight depending on models. Advantages: Versatility: The QF150 can handle a wide range of fluids, including: Biological Solutions: Proteins (e.g., IgG, monoclonal antibodies), enzymes, and vaccines. Suspensions and Polymers: Silicon, latex, and chromatography media. Cell Suspensions: Bacteria, yeast, algae, and mammalian cells. Food Products: Dairy products and gelatine. Low-Shear Design: Ensures gentle handling of sensitive materials, maintaining their stability and functionality. CIP/SIP Capable: Facilitates easy cleaning and sterilization, crucial for maintaining hygiene in production environments. Compact and Lightweight: Easy to integrate into laboratory or production settings without occupying much space.

Condition: used, This listing is for 1 of 2 QuattroFlow QF15PTIU Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The QuattroFlow QF 150 PTIU is an advanced single-use quaternary diaphragm pump tailored for biopharmaceutical applications, offering several notable features and benefits that enhance its functionality in sensitive environments. Here’s a detailed look at its specifications and advantages: Key Features and Specifications: Flow Rate: Operates within a range of 0.02 to 3.2 lpm (0.01 to 0.85 gph), making it highly adaptable for various bioprocessing tasks. Design: Utilizes a 4-piston diaphragm positive displacement system, which ensures total product containment. This design minimizes the risk of abrasion and particle shedding, crucial for maintaining product purity. Materials: Constructed from disposable machined polypropylene, the pump is designed specifically for single-use applications, significantly reducing contamination risks. Control System: Equipped with an integrated controller, allowing for automated operation and precise control over pump functions, which enhances efficiency and consistency in processes. Certifications: Complies with USP Class VI and 3.1B standards, as well as CFR FDA regulations, ensuring it meets the stringent requirements for biopharmaceutical manufacturing. Applications: The QF 150 PTIU is versatile and suitable for various critical applications, such as: Filtration Systems: Ideal for use in Tangential Flow Filtration (TFF) setups, where it can efficiently process biological solutions. Chromatography Systems: Effectively manages the flow of reagents and samples during separation processes. Feeding Pumps: Provides reliable and consistent dosing in various bioprocessing applications. Virus Filtration: Plays a pivotal role in ensuring the safety of biopharmaceutical products by filtering out contaminants. Hedpfx Ahoxxz Iwjvjfd Sterile Filtration: Maintains sterility in critical processing steps, essential for product integrity. Key Benefits: Total Product Containment: Ensures that no product is lost or contaminated during transfer, vital for high-value biopharmaceuticals. Low Pulsation and Low Shear Operation: These features preserve delicate biological materials and maintain their integrity throughout the pumping process. Variable Flow Rate: Allows for flexibility in operations, accommodating different process needs easily. Quiet Operation: Minimizes noise during operation, making it suitable for laboratory and clinical environments. CIP/SIP Capable: Facilitates easy cleaning and sterilization, ensuring high hygiene standards are maintained. Autoclavable: Supports sterilization processes, enhancing its usability in critical applications. Single-Use Design: Reduces maintenance requirements and downtime, allowing for efficient workflow in biopharmaceutical settings.

Condition: used, Twin-shaft shredder Manufacturer: Fransson Weight: 1500 kg Mouth width: 750 mm x 680 mm With sieve Mesh diameter 50 mm Capacity: from 20-50 m3 per hour Hfjdpfjycv Uhex Ahved Equipment after repai

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Hfedpfx Ajxxz I Rjhvjd Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids Hedpfx Ajxx Avpohvjfd that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. Hfsdoxmvm Rjpfx Ahved 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. Hfjdpjxxy S Usfx Ahved CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, This listing is for a QuattroFLow QF15SU-U Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF15SU-U is a specialized 4-piston diaphragm pump designed for single-use in biopharmaceutical applications. Its features and applications make it particularly advantageous for handling delicate fluids. Here’s a closer look: Key Features: Single-Use Pump Chamber: Constructed from plastic, this design significantly reduces contamination risks and the need for cleaning between uses. 4-Piston Diaphragm Design: Ensures smooth and consistent flow, critical for sensitive applications. Self-Priming Capability: Can operate without priming, enhancing operational convenience, especially in processes where fluid levels fluctuate. Dry Running Capability: The pump can run dry without damage, providing flexibility in various operating conditions. No Rotating Parts: This design feature prevents heat generation and eliminates the risk of particle shedding, ensuring that the product remains uncontaminated and stable. Gentle Fluid Transfer: Designed to facilitate the safe and secure transfer of fluids, ideal for sensitive biological products. Applications: Biopharmaceutical Applications: Perfect for pumping aqueous solutions and biological products, especially those sensitive to shear forces, like proteins and enzymes. Research and Production Facilities: Suitable for use in laboratory or pilot plant environments, where precision and reliability are paramount. Re circulation of Feed/Retentate: Effective for processes involving membrane cassettes, hollow fibre, spiral wound, or ceramic filtration elements. Feed Pump for Filters: Hfodpfxjxxz Ide Ahvjd Works well as a feed pump for filter cartridges or plate and frame depth filters, ensuring optimal flow rates and minimal shear. Summary: The Quattroflow QF15SU-U stands out as a highly efficient solution for applications that require gentle handling of sensitive aqueous solutions. Its single-use design, self-priming ability, and lack of rotating parts make it an excellent choice for biopharmaceutical, biotech, food, and cosmetic sectors. This pump not only enhances process efficiency but also maintains the integrity of valuable biological materials throughout their handling and processing stages.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, For sale on behalf of a customer is a Segem ERT 100. The machine was operational until removal. The rotor bearing was replaced in September 2023 (approx. 2000 hours). Hodpfx Ajxhf N Dohvofd

Condition: ready for operation (used), Siemens SIMOTICS 3 1PH7107-7QF23-0CK0 Compact Asynchronous Motor SN: YFF8620050601001, used, in good condition, 100% fully functional. Scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and shipping separately! Hfodox Dv U Aspfx Ahvsd

Condition: used, functionality: fully functional, Wema Probst QF50 Cross-Mill Machine Cross-Mill machine for processing round timber with a swivel table for adjusting the milling angle. 2 machining stations Hfsdswc Tdnepfx Ahvsd 1 cross-milling unit 1 drilling unit

Condition: good (used), Year of construction: 1998, Column jib crane, overhead crane, workstation crane -Manufacturer: VETTER, Column jib crane type TS10-7.0, lifting capacity 1000 kg -Note: with test book -with chain hoist: Vetter type SIE 6F, year of manufacture 1998 -Lifting speed: 5.0/1.25 m/min -Drive system: yes -Swivel drive: yes -Projection: 7020 mm -Total height: 3870 mm -Hook height: 2960 mm Hfsdpjx R U Azsfx Ahvod -Swivel range: 360° -Transport dimensions: 1460/7570/H2280 mm -Empty weight: 1250 kg

Year of construction: 2024, condition: new, Log cross conveyor - Number of chain strands according to customer specifications Hfodpfx Ahehmp Ibevod - length and width according to customer specifications - powerful SEW gear motors - solid pin conveyor chain with gentle rollers