Upper tool

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Nodpfx Aox U Af Soh Hewb Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Nsdpowk D Efofx Ah Hswb Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg Nodpfjx U Afxjx Ah Hswb EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Main spindle C-axis: 0.001 degrees Max. sub spindle speed: 10,000 rpm Sub spindle C-axis: 0.001 degrees Tool capacity: 18 tools Number of axes: 7 MACHINE DETAILS Nwjdsx U Ad Uopfx Ah Hsb Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor FMB Turbo 3-26 bar feeder

Condition: excellent (used), Sandblasting machine De Laurentiis model 100 TS year 2002 Nwedporxr Rgofx Ah Heb

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0501DN6870, Year of construction: 2024, operating hours: 128 h, load capacity: 1,500 kg, lifting height: 3,000 mm, overall weight: 2,940 kg, wheelbase: 1,475 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,500 kg Lift height: 3,000 mm Wheelbase: 1,475 mm Distance to load centre: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,120 x 2,130 mm Total weight: 2,940 kg Max. battery weight: 283 kg Operating hours: 128 h EQUIPMENT Side shifter Lighting Indicators Rear-view mirror Protective roof Trailer coupling Njdpsx Ux Rksfx Ah Hewb Power steering Solid rubber tyres at the front, pneumatic tyres at the rear Charger

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Nedpex Tt Uuefx Ah Howb Total power requirement: 13.4 kW Dimensions & Weight Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control HEIDENHAIN TNC 530 Nedpfx Ahow Rrcqo Howb Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Spindle hours 10.850 h weight of the machine ca. 9,5 t dimensions of the machine ca. 5,45 X 3,53 X 2,63 m

Condition: ready for operation (used), functionality: fully functional, power: 55 kW (74.78 HP), gearing type: automatic, fuel type: diesel, empty load weight: 11,910 kg, Year of construction: 2020, operating hours: 2,761 h, machine/vehicle number: MAN00000K01048416, Equipment: AdBlue, CE marking, TECHNICAL DETAILS Tyre size: 375/85-24 Axle configuration: 4x4 Load capacity: 4,000 kg Lift height: 17.55 m Reach: 13.08 m MACHINE DETAILS Power: 55 kW Transmission type: Automatic Fuel type: Diesel Engine brand: TD 3.6 L4 Emission level: Stage V / Tier IV final Drive: Wheel Nsdpex Tq Ncsfx Ah Howb Chassis design: Rigid Dimensions & Weight Transport dimensions (L x W x H): 6.27 m x 2.36 m x 2.45 m Unladen weight: 11,910 kg Operating hours: 2,761 h EQUIPMENT All-wheel drive CE marking AdBlue system Forks Quick couplers Stabiliser Additional hydraulics

Condition: ready for operation (used), functionality: fully functional, empty load weight: 34,600 kg, Year of construction: 2019, operating hours: 5,017 h, nominal power: 170 kW (231.14 HP), machine/vehicle number: WLHZ1490LZC047884, Equipment: AdBlue, CE marking, air conditioning, TECHNICAL DETAILS Track width: 600 mm MACHINE DETAILS Dimensions & Weight Transport dimensions (L x W x H): 10,000 mm x 3,200 mm x 3,800 mm Unladen weight: 34,600 kg Nwodsx Tqv Nepfx Ah Hob Engine brand: D934 A7-24 Engine rated power: 170 kW Maximum speed: 52 km/h Operating hours: 5,017 h EQUIPMENT Air conditioning AdBlue system CE marking Hammer/shear hydraulic circuit Safety rupture valve – boom/lifting gear Safety rupture valve – dipper/boom Additional hydraulics Hydraulic circuit for tilt/rotator Battery isolator switch Rotating beacon Automatic lubrication system Steel tracks Standard excavator bucket Demolition/FOPS cab guard

Condition: new, number 70 Positionen weight 90 kg condition neu 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 Nwsdpfswth N Tsx Ah Hjb 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028652 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028653 2x Stop Clamping Angle D28 275x50x175x25 mm – Item No. 4028654 1x Set of Stop and Clamping Angle D28 300 x 275 x 100 mm (1x left, 1x right) – Item No. 4028847 2x flat angle D28 175x175x25 mm 1x elongated hole + 3x round hole – item no. 4028655

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, shovel volume: 5 m³, Year of construction: 2016, operating hours: 9,118 h, machine/vehicle number: VCEL150HH00005075, Equipment: AdBlue, air conditioning, The wheel loader's tires have been renewed! Nwjdpfx Aox Tqm Ijh Hsb TECHNICAL DETAILS Bucket capacity: 5 m3 MACHINE DETAILS Dimensions & Weight Transport dimensions (L x W x H): 9.1 m x 3.2 m x 3.9 m Unladen weight: 26,100 kg Fuel type: Diesel Engine brand: D13J Emissions level: Stage IV / Tier IV final Chassis type: Articulated Operating hours: 9,118 h EQUIPMENT Air conditioning AdBlue system CE marking

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1104104, measuring range X-axis: 1,205 mm, measuring range Y-axis: 2,005 mm, measuring range Z-axis: 1,005 mm, workpiece weight (max.): 2,000 kg, workpiece height (max.): 1,115 mm, The measuring table has been supplemented with milled aluminum plates. These plates are equipped with M6 holes in a 50 mm grid pattern, allowing for variable clamping options for workpieces. TECHNICAL DETAILS Measuring range X-axis: 1,205 mm Measuring range Y-axis: 2,005 mm Nwedpfx Ahox U Sv Ho Hjb Measuring range Z-axis: 1,005 mm Drive speed in CNC mode Traversing speed: 8–250 mm/s Measuring speed: 1–3 mm/s Drive speed in J/S mode High speed: 0–80 mm/s Low speed: 0–3 mm/s Fine speed: 0.05 mm/s Acceleration Acceleration per axis: 0.1 G Max. acceleration: 0.17 G Resolution: 0.0001 mm Measuring table Material: Granite Working area: 1,408 mm x 2,980 mm Clamping threads: M8 x 1.25 Max. workpiece height: 1,115 mm Max. workpiece weight: 2,000 kg MACHINE DETAILS Dimensions & Weight Main unit dimensions (D x W x H): 3,230 x 2,150 x 3,585 mm Weight (incl. stand and control unit): 5,388 kg Compressed air supply Air pressure: 0.4 MPa Air consumption in normal operation: 100 L/min Air consumption from air source: 150 L/min Temperature conditions Ambient temperature: 16–26 °C Thermal fluctuation per hour: 2.0 K Thermal fluctuation per day: 5.0 K Thermal gradient vertical: 1.0 K/m Thermal gradient horizontal: 1.0 K/m Accuracy Accuracy to ISO 10360-2: E = 4.9 + 5L/1,000 Probing error Probing error ISO 10360-2 (TP2): R = 5.2 µm Probing error ISO 10360-2 (TP200): R = 5.0 µm EQUIPMENT Geopack Cosmos 2.3 software PH 10 probe head TP 200 Change rack Note: The machine was in operation until 2013, after which it was professionally dismantled by the manufacturer. The machine was then stored in an industrial hall. The last factory calibration was carried out in 2013. The calibration certificate is available as an attachment in the listing.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Nwedpfx Ahsvrxd Ho Hjb Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,396 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain 530, number of axes: 3, In 2022, the tool magazine door was replaced. In 2023, the SIMODRIVE 611/18A servo converter was replaced! TECHNICAL DETAILS Travel X-axis: 650 mm Njdpfxjx Up E Ej Ah Hjwb Travel Y-axis: 450 mm Travel Z-axis: 450 mm Tool holder: SK 40 Number of axes: 3 MACHINE DETAILS Control: Heidenhain 530 Operating hours Spindle hours: 18,396 Machine hours: 56,040