Complete Bottling Line

Condition: ready for operation (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SK02UXKP0365, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, Auction of a Zeiss T-Scan Hawk with only 20 operating hours! TECHNICAL DETAILS Maximum measuring range: 550 mm x 600 mm Measuring accuracy: 0.02 mm + 0.035 mm/m MACHINE DETAILS Laser class: Class 2M (eye-safe) according to IEC 60825-1:2014 Iedpfjx Sqfnsx Ah Neht Operating hours: 20 EQUIPMENT Notebook GOM Inspect software

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Iodjnpbhvepfx Ah Noht

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, load capacity: 2,500 kg, throat depth: 2,500 mm, empty load weight: 713 kg, construction height: 3,350 mm, pivoting range: 360 °, Column Slewing Crane M25-2.5 TECHNICAL DETAILS Load capacity: 2,500 kg Jib outreach: 2,500 mm Height: 3,350 mm Slewing range: 360° Outreach: 2,500 mm Underside of jib: 2,980 mm Overall height: 3,350 mm Bolt circle diameter: 530 mm Flange outside diameter: 610 mm Beam flange width: 150 mm Minimum approach dimension (Aa): 420 mm Internal approach dimension (Ai): 820 mm Support column length: 1,530 mm MACHINE DETAILS Weight: 713 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 48 V EQUIPMENT Electric travel trolley Electric chain hoist Lifting capacity: 2,500 kg Lifting height: 4 m Lifting speed: 4 / 0.7 m/min Crane trolley Ihedpfxjx Nvtle Ah Nst Motorized travel trolley Flange width range: 138–195 mm Flange width: 150 mm Travel speed (max.): 10 m/min Travel speed (min.): 3 m/min MACHINE DETAILS Travel motor (trolley) Power: 0.3 kW Rated current: 1.2 A Starting current: 4.2 A Hoist Hoist motor power: 3.6 kW Hoist motor rated current: 8.2 / 4.3 A Hoist motor starting current: 39 / 6.7 A Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 48 V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 10000987990, total height: 5,300 mm, total length: 30,000 mm, total width: 8,900 mm, load capacity: 3,200 kg, lifting height: 4,450 mm, Up for auction is a Konecranes overhead crane with 2 bridges, each offering a lifting capacity of 3.2 t. TECHNICAL DETAILS Lifting capacity: 3,200 kg Span: 8,900 mm Lifting height: 4.45 m Hoisting speed: 3.9 m/min (ASR 1.2 m/min) Trolley travel speed: 20 m/min, infinitely variable Crane travel speed: 40 m/min, infinitely variable MACHINE DETAILS Number of bridges: 2 Number of trolleys: 2 Dimensions & Weight Dimensions (L x W x H): 30,000 x 8,900 x 5,300 mm Trolley weight: 230 kg Crane total weight without trolley: 1,300 kg Electrical Data Operating/Control voltage: 400 V / 48 V, 50 Hz Rated power: 3.0 kW EQUIPMENT Runways Radio remote control Conductor rails Overload protection Load spectrum memory Signal horn Pre- and limit switches for trolley and crane travel (slow/stop) Isdpfex Nvrzsx Ah Neht Guide rollers to reduce skewing forces Buffer extension to compensate for guide rollers

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity. Iedevgu D Sjpfx Ah Nsht   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 11690446, load capacity: 4,000 kg, lifting height: 6,530 mm, TECHNICAL DETAILS Span: 9.9 m Crane lifting capacity: 4,000 kg Lifting height: 6.53 m Lifting speed at full load: 3.2 m/min Lifting speed at partial load: min. 3.0 m/min up to max. 7.5 m/min Trolley travel speed: 20 m/min Crane travel speed: 40 m/min MACHINE DETAILS Weights Trolley weight: 390 kg Crane weight without trolley: 1,750 kg Classification Crane class: 3U4/Q2, EN 13001-1 Hoist mechanism group: 4.3 + 4.4 m / ISO M6 Crane girder mechanism group: 16 m / M5 Ijdpox Nvpgjfx Ah Noht Electrical data Power supply: 400 / 48 V / 50 Hz Rated output: 3.3 kW EQUIPMENT Radio control Overload protection Load spectrum memory Pre- and end-limit switches for crane and trolley travel Remote control type “Mini Joystick” Spare transmitter Storage cabinet Spare battery Charging station Signal horn Hook collision protection Hook center-of-gravity alignment Manual crane hook tracking Safety conductor line incl. main disconnect switch and power supply Clampable holding brackets Riser cable (fixed installation) to be provided by customer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 10000987991, overall weight: 5,110 kg, load capacity: 6,300 kg, main lifting speed: 4,000 mm/min, lifting height: 5,200 mm, 6.3t S-DG Double-Girder Overhead Crane TECHNICAL DETAILS Crane rail type: 60 × 40 Load capacity: 6,300 kg Ihsdpfx Ajx Nvlbeh Njt Span: 17.100 m Maximum deflection of crane bridge at rated load: 22.8 mm Wire Rope Hoist Max. lifting capacity of hoist 1: 6,300 kg Hoist classification: 1.2 + 1.2 m (D_min) Lifting height: min. 4.9 m / max. 5.20 m Type of trolley: double rail trolley Wire rope control: with hook drift Hook type/size: RSN2.5V Speeds Hoisting speed at rated load: min. 0.08 m/min to max. 4.0 m/min CSR speed at partial load: max. 6.00 m/min Trolley travel speed: max. 20 m/min Crane travel speed: max. 40 m/min MACHINE DETAILS Weight of crane including hoist: 5,110 kg Electrical Data Supply voltage: 3 Ph / 400 V / 50 Hz Control voltage: 48 V Area of application: indoors Ambient temperature: min. 5 °C to max. 40 °C Motor Power Main hoist motor: 4.5 kW Duty cycle main hoist motor: 60% ED Trolley travel motor: 1 × 0.45 kW Duty cycle trolley travel motor: 40% ED Crane travel motors: 2 × 0.65 kW Duty cycle crane travel motors: 40% ED EQUIPMENT DynADrive inverter control Control Pro Performance 4-stage hoist limit switch Hoist brake Wire rope drum Gearbox Overload protection Load spectrum recorder Slow/stop limit switches for trolley and crane travel Crane equipped with REMOX516MI radio remote control Includes signal horn (sound level 98 dB) Includes spare transmitter for radio remote control Includes storage cabinet for remote control Rope angle features Safety festoon line approx. 30 m long, along central support row Includes mains disconnect switch and power feed at any point Rising main (fixed installed cable) to be provided by customer Note: Further technical details can be found in the attached quotation.

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Ihodpfx Ajrkgy Ujh Njt

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 8531, Auction of a Famot MEXPOL TUM 35! Ijdpfx Ahox Ngnmo Nsht

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 40167, Auction of a MAHO universal milling machine! Iedpex Ngkzjfx Ah Njht

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 Iodpfx Ahjn D Hm Ss Nsht L: 4.000 mm, W: 2.700 mm, H: 2.800 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 50 h, machine/vehicle number: 2390, bending force (max.): 100 t, stroke length: 140 mm, throat depth: 300 mm, distance between stands: 2,600 mm, overall weight: 6,650 kg, TECHNICAL DETAILS Bending force: 100 t Cylinder stroke: 140 mm Open width without tooling: 345 mm Distance between uprights: 2,600 mm Ihsdpsx Eyv Nsfx Ah Not Throat depth: 300 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Rotational speed: 1,500 rpm MACHINE DETAILS Control system: DA 66 T Oil capacity: 125 L Total weight: 6,650 kg Power: 7.5 kW Voltage/Power supply: 400 V AC Control voltage: 24 V AC/DC Operating hours: under 50 h

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Isdpsx Sqpmofx Ah Nsht Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: used, Used olive oil production line with output capacity of 7 tons/hour. The equipment was made by Pieralisi in 2004 and is currently still in operation. Major equipment includes: - Leaf remover - Olive washing machine - Olive crusher - 700 litre Malaxer Panorama - 1000 litre Malaxer Panorama Iodpfx Ahjx Nim Sj Njht - Electric panels - Decanter centrifuge Elephant S 470/2 - Vibrator filter for Elephant S 470/2 - Decanter centrifuge Jumbo 2 - Decanter centrifuge Major 3 - Vibrator filter for Major 3 - Separator 1500-2000 Full equipment list on request.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0-250-05-2654, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit X-direction Drill spindles: 16 Z-stroke: 60 mm Drilling depth: max. 38 mm Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit Y-direction Drill spindles: 15 Z-stroke: 60 mm Drive: 1.5 kW Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drill chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal drilling unit X-direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: counterclockwise Speed: 4,800 rpm Ihedpfxex Sqm Se Ah Nst Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit Y-direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: clockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Router motor Drive power: 7.5/10 kW (S1/S6 duty cycle) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid recirculation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine positions: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid recirculation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT Integrated CNC axis (360° rotational) Torque support Main spindle (motor power 7.5 / 10 kW, HSK F63) Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air connection strip with quick couplers Extraction hood for additional router motor Router 5 kW with Hydro quick-release clamping system Left-side safety guard with door Safety tread mat 3,250 mm Control cabinet left Note: For further details regarding the machine’s equipment, please refer to the attached documents.