Paint finishing system

Luft-und Trockentechnik GmbH KSP 6-BT

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 11.11.30. Blasting chamber W=1050 D=1050 H=955mm. 1 TÜV-tested pressure vessel 30l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Electrical height adjustment of the cabin for body-friendly posture. Memory position storage for 3 heights. Dust extraction filter 2000m³/h 2,2kW. Ppjdpfoga Ehbsx Amkot

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm Pjdpfx Amovbcxtskspt No of strokes / min - 12 Main motor 41kw Movie available

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Psdpfx Ameyf Rqvekjpt Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm  (in direct exit)Distance between columns: 2500 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 20 - 3.000 rpm (5.000 rpm direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: New HR-510External coolant Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: new, Year of construction: 2026, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,200 mm, 5-axis gantry machining center EDEL CYPORT CP 4030 Travels X/Y/Z: 4,000 / 3,000 / 1,200 mm Gantry passage Y/Z: 3.276 / 1.405 mm Rapid Traverse X/Y/Z 30/30/15 m/min 2-axis-NC-swivel head M-Series of German manufacturer Cytec: Swivel range A-axis : +/-110° Swivel range C-axis +/- 360° Powerful milling spindle of German manufacturer Cytec: Tool taper: HSK-A100 Speed: 12,000 rpm Power: 42/53 kW (100%/40% ED) Torque: 200/253 Nm (100%/40% ED) Control: HEIDENHAIN TNC 640 HEIDENHAIN wireless electronic hand wheel incl. charging station 5-axis path control DXF-converter CAD-Viewer KinematicsOPT Energy efficiency certificate Remote Service Tool magazine: Number of pockets: 64 pcs. HSK-A100 max. tool diameter: 105/150 mm max. tool length: 300 mm max. tool weight: 8 kg Coolant system Manufacturer: KNOLL Tank volume: 1,600 L external coolant supply: 20 bar internal coolant supply: 50 bar Paper band filter Ppedsir Iczspfx Amkst Spray gun Chip conveyor Coolant-airblast-changeover Oil-Mist extration unit Work piece measuring, Touch probe BLUM TC 60 - radio controlled Tool measuring BLUM LaserControl Micro Single NT Working area coverage Safety light sensors Documentation CE-certification Made in Germany

Year of construction: 1963, condition: ready for operation (used), Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected. Ppodpeh I Edvsfx Amket

Condition: new, Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution. The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles). The design of the machine has been optimized over the years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Main features -attractive price of a very well equipped basic version -Highly dynamic and precise cutting of 2D applications, tubes and profiles -cutting capacity from 0,5mm to 100mm material thickness -Comprehensive database with predefined cutting parameters -Possibility to optionally extend the length of the working area Technical data Drive Servo AC Available working widths 1.500, 2.000, 2.500, 3.000 mm Available working length Any length from 1.500 mm positioning speed 25,000 mm/min cutting thickness up to 100 mm Ppjdpfef Alb Asx Amkjt Cutting quality DIN-EN ISO 9013 Positioning accuracy DIN-EN 28206 Repeat accuracy DIN-EN 28206 Electrical systems DIN-EN 81346 Safety module DIN-EN 13850 Working height 740-760 mm Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation Ppjdpfxjdzp Tcs Amkst - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Podpfx Aodlcy Hjmkspt Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Ppsdpfx Asytrgzjmkst Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Condition: Well-maintained (training machine) Equipment: Milling unit 5 kW Tool holder, cylindrical, 25 mm with hook spanner clamping Drilling unit 1.5 kW with 19 spindles Crosshead with 4 drilling spindles Saw unit can be swiveled from X to Y. Light barriers in the front area New PC in 2015 Operating system: Windows 98 Ppodpexqihcofx Amket Weeke software: Woodwop 4.0 Technical data: Travel range X: 3455 mm Travel range Y: 1480 mm Travel range Z: 260 mm External dimensions: Length: approx. 6115 mm Depth: approx. 3660 mm Location: Röllbach Availability: short-term