Folding Machine

LOTZE HZK 20

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 2020 mm Hsdpfjxab S Sex Aiqofn plate thickness 2.0 mm distance between columns 2100 mm angle adjustable from - to 130 Grad total power requirement manuell weight of the machine ca. 1850 kg. range L-W-H 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Hfjdpfx Aijua Tbwjqsn Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg Hjdepuy H Dspfx Aiqjfn - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger bending machine with segmented top clamp PNEUMATIC CYLINDER!!! Including manual backstop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Max. bending angle ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm Hfjdpfx Aioga T Dpsqsn

Condition: new, Year of construction: 2025, Mechanical sheet metal guillotine METFORMER HCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Hedpfx Aiofwmydsqofn Model, HCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 01113, total width: 2,180 mm, total length: 12,200 mm, bale length: 500 mm, bale height: 400 mm, pressing force: 350 t, overall weight: 34,000 kg, Ecotecnica shear baler mod. 2535, year 2013, with approximately 5,000 operating hours, in good working condition and complete with documentation. Machine suitable for compressing and shearing ferrous scrap, including sections, sheet metal, and mixed scrap. Hodpjy Ibw Tefx Aiqofn Technical data: Shear force: 350 tons Operating hours: 5,000 Compression box length: 5.0 m Box width with wings open: 1.70 m Bale size: 500 x 400 mm Total length: 12.20 m Width: 2.18 m Weight: 34,000 kg Equipment: Iveco diesel engine, 172 HP Radio remote control Complete documentation Machine is fully functional and ready to use. Inspection and testing possible.

Condition: new, Year of construction: 2026, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Hfodpfxowd Emkj Aiqon Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard Hodopgmqijpfx Aiqjfn documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Hfsdszx Ennspfx Aiqen Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF Hjdpfx Aisu Icn Eoqofn *