LIEBHERR LS 200F

LIEBHERR LS 200F

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment Gbedpfx Ast Hw N Hen Rel prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,044 h, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, total width: 2,500 mm, overall weight: 11,000 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 16,800 W, product length (max.): 2,500 mm, table load: 500 kg, tool weight: 8,000 g, number of slots in tool magazine: 82, number of axes: 5, This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details. • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tooling/magazine: • Number of revolvers/magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll Cooling • Renishaw OMP 40 probe • IKZ (inner cooling through spindle) • Laser beam monitoring • Chip conveyor Gbedpoy Al Ufsfx An Rjl • SK 40 • Operating voltage 400 V/3~ • Mains frequency 50 Hz • Control voltage 24 V- • Total nominal current 60 A • Total performance 41 kVA Additional equipment • OPTIONAL for an additional charge: Tooling package available: approx. 530 tools • OPTIONAL for an additional charge: Zero-Point Clamping SystemMachine was maintained in 2025 by HERMLE officialIn August 2025, the spindle head was replaced and the geometry was checked and adjusted again by HERMLE official Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1996, spindle passage 80 mm max. turning diameter 395 mm Gbjdpfx Aoxbtqvon Rol Max. Turning length 750 mm control System TX 8H max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Godpfx Anewu Rgqe Rsbl Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Year of construction: 2001, condition: excellent (used), Multispindle lathe Schütte AG20 Gbjdpfohrihyox An Rol

Condition: used, Year of construction: 2017, Technical details: Gbedpfx Ajttxg Ssn Rsl grinding diameter: 280/320 mm grinding length: 750 mm centre height: 170 mm weight of the machine ca.: 22,5 t dimensions of the machine ca.: 4,7 x 3,65 x 3,0 m

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 • Tool changer: SMTC • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB Gedpfx Aeyid Hvon Rjbl • HSM: High Speed Milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm Gsdpfjwgi Drsx An Rebl z-travel 400 mm control Heidenhain Mill Plus V600 weight of the machine ca. 7000 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) Gbsdpfscc D Ddsx An Rel machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, DMG CMX 50 Year of manufacture: 2023 Spindle hours: approx. 1,300 h Spindle: 15,000 rpm inlineMASTER Tool holder: SK40 Tool stations: 30 slots Control: Siemens 840D sl X travel: 500 mm Y travel: 450 mm Z travel: 400 mm Weight: 4,700 kg Gbedpfsy Em Urex An Rel