Laser cutter

Laser światłowodowy JETSYSTEM LASER JSL3015CE

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, overall weight: 6,100 kg, Machine type: PUMA 2600Y Date of installation: 02/2023 Dcedpfoywllysx Agvjk Additional tooling: • Capto C3 straight holder: 2x • Capto C3 angle 90° holder: 1x • ER20 collet chuck Capto: 10x • ER32 collet chuck Capto: 4x • Weldon holder Ø20 Capto: 1x • Capto tool rack: 1x • Indexable drill: 1x Ø37 + 1x Ø19.5

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Dedjt Rmdzspfx Agvsck Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Dedpfx Agsym Sdyjvsck Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 12.7 [mm] Dcodpfx Agouhav Dsvsk - main headstock strokes (fixed/rotary sleeve) : 130/80 [mm] - spindle power : 4 [kW] - rotation speed : 12 000 [rpm] - upper turret : 6 positions - lower turret : 6 positions - number of rotary positions on turret : 6 - sub-spindle maxi diameter : 12.7 [mm] - sub-spindle rotation speed : 12 000 [rpm] - dimensions : 2850 x 110 x 1480 [mm] - hours in production : 12408 [H] - spindle hours : 9400 [H] EQUIPMENT - CNC TRAUB TX 8i control - bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - brake on main spindle and sub-spindle - parts catcher with conveying strip - anti fire device - lubricating tank with pump with cooling unit - chip conveyor - various fixed and driven tool holders

Year of construction: 1982, condition: used, In Good Condition Dcodpfedq Ug Iex Agvjk

Condition: good (used), Year of construction: 2022, operating hours: 6,099 h, functionality: fully functional, machine/vehicle number: 6500014216, cutting range round steel at 90°: 240 mm, cutting range round steel at 45°: 240 mm, cutting range angle steel at 90° (X-axis): 180 mm, cutting range angle steel at 90° (Y-axis): 180 mm, cutting range angle steel at 45° (X-axis): 180 mm, cutting range angle steel at 45° (Y-axis): 180 mm, type of input current: three-phase, total length: 14,000 mm, cutting range square steel at 90°: 180 mm, cutting range square steel at 45°: 180 mm, feed length Y-axis: 7,500 mm, product height (max.): 12 mm, Tube laser Bodor T230-650CE 4K laser power: 4kW for tubes and profiles 7500mm length × 20-240mm diameter round 7500mm length × 20mm-180mm square automatic loading 3000-6200 Laser head 2½D Djdpfevvlbtex Agvjck Selling due to purchase of 3D You can always come and see this machine running.

Condition: good (used), Year of construction: 1993, CNC universal milling machine, DMG MORI, Type: MH 600 C Control system: MAHO 532, year of manufacture: 1993. Equipped with an automatic swivel milling head (G17/G18) and B-axis rotary table. Without tool changer. Further data can be found in the data sheet. Complete machine documentation and data backup available. Good overall condition. Dcodpfx Aoiihxhegvok

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA Dcodpfxeh N Sc Ej Agvsk - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, control type: CNC control, laser type: fiber laser, laser power: 10,000 W, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, Equipment: CE marking, dust extraction, emergency stop, fume extraction, safety light barrier, Used Trumpf10kw 5040 4metre x 2metre Trumpf fiber laser for sale Year 2019 Dcsdpfx Aoylax Nsgvsk Complete with active cut control option Selling without automation 10kw / 10,000 w 4metre x 2metre cutting bed

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Dcedpow A Nnpjfx Agvek