Edge banding machine

Lange Maschinenbau B 90 K

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Gbedpfxowka Nyj Agbeg Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Year of construction: 2000, condition: used, Roofing elevator / plug-in elevator Böcker ES13B year 2000 with drive motor 1,5 kW length 13 meters Gsdpfxon Hxz Te Agbobg payload 200 kg with or without car trailer immediately available Location: Austria, near Vienna

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit Godev H D S Sjpfx Agbobg 2 x finishing unit profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 248, (Fast and functional drilling of series of holes thanks to interchangeable drilling gear system 32 with continuation examples) (5-spindle horizontal drilling gear allows simultaneous drilling of hardware and wooden dowels) Year of manufacture: 2009 Machine number: 248 Maximum working pressure: 6bar Depth adjustment up to 550mm Vertical gear motor power: 1.6 kW Horizontal gear motor power: 0,75 Voltage: 380 V, 3 phases Injection pressure at 6 bar: 296 kg Weight without horizontal drilling device: 95 kg Weight with horizontal drilling unit: 118 kg Diameter of connection for chip extraction: 100 mm Volumetric flow rate: 141 m3/h Air consumption: 1.2 liters / stroke Work table: 800 x 970 mm Recommended base cabinet height: 950 mm Additional equipment: Extension rulers Godpfxjt Ebibo Agbjbg

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Gjdpfxocdrmms Agbobg Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: new, Year of construction: 2023, Demo machine Year of manufacture: 2023 Equipment and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Long infeed fence 1252 mm Jointing milling unit with 2 motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edgebanding unit 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3 pneumatic Spray unit GM 201 after pressure unit End trimming unit 1918 pneumatic Godpfxew I Uytj Agbebg Extraction hoods for end trimming unit Combination milling unit FR201 with DIA cutters R=2 mm Profile trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short notice

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Gedpjxqggcjfx Agbjbg Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit Gbedpfed Inktjx Agbjg

Condition: used, Year of construction: 2014, Used machine Gbedpfexavr Hjx Agbog Year of manufacture: 2014 Features and technical data: - Extendable workpiece support - Joint milling unit FG201 with 2 milling heads incl. DIA cutters - Fully automatic edge feed 1903 - Glue application system cartridge GlueJet 301 with automatic glue height adjustment (sensor-controlled nozzle) - Special accessory: pressure regulation of cartridge contact pressure - Pressure section 1912-3 pneumatic, first roller driven with pneumatic plunge control - End trimming unit 1918, pneumatic adjustment - Milling unit FR 201 multifunctional milling unit for flush, radius, and radius run-out incl. DIA cutters - Corner copying unit 1832 up to 3 mm edge thickness incl. DIA cutter - Scraper unit 1929 with 2 scraper holders - Chip collection box - Surface scraper 1964 Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6 - 45 Edge thickness (mm): 0.4 - 3 Feed speed (m/min): 10 Total length (mm): 4630 Weight (kg): 1250 Availability: short notice Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel Gbjdpfx Ajgf Sw Nogbjg - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating