Paint drying wagen

Lübbers

Condition: good (used), Tray trolley, paint drying trolley, specialized transport trolley, transport trolley, platform trolley, carrying arm trolley -Hardware trolley: Heavy-duty paint drying trolley with 15 levels -Total length: 1660 mm Iedpfjr Ngp Asx Akxsia -Total depth: 700 mm -Total height: 2040 mm -Quantity: 1x transport trolley available -Weight: 93 kg

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm Isdpfx Aksv I Akvexsia - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: new, Year of construction: 2025, functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, total width: 3,200 mm, total length: 1,700 mm, inner dimension width: 1,500 mm, HEAVY DUTY Drying Trolley / Cantilever Trolley – Designed for the Toughest Demands Key Facts at a Glance: 1. Ball bearing sliding rail for width adjustment from 1.70 to 3.00 m span 2. Space-saving, nestable design 3. High intermediate clearance of 135 mm for easy loading even at fast work cycles 4. Upright square tube support for a minimal contact area 5. Generous usable depth of 1,000 mm 6. High load capacity of 1,000 kg 7. Premium-quality casters for effortless movement, even when loaded Genuine high quality – made in Denmark. Ijdpfx Akofiuhvjxoia The trolleys are generally available directly from stock. To reduce shipping costs for our customers, we deliver the trolleys pre-assembled (see picture). Final setup is very quick and easy. Do you have any questions? Contact us – we are happy to assist!

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 THE ADVANTAGES 4 workstations on one machine 80, 300 and 1000 mm radii Straight and curved grinding back 150 mm belt height Pneumatic belt tensioning Stepless pneumatic aggregate oscillation Solid cast iron aggregate long lasting good sanding results Suction all around the worktable Only the highest quality components Because we are convinced of ourselves 5 years warranty Every machine handmade in our home country (Rehnen) Lifetime spare parts supply Iiodekwhwljpfx Akxoa GS & BG dust tested Motor power: 4 KW Sanding belt size: 150 x 2700 mm Sanding belt speed: 15m /sec. table size: 345 x 2000 mm space requirement: 2000 x 3000 mm weight : 560 kg Suction diameter : 140 mm Availability : short term Storage location: Hochheim

Condition: used, Year of construction: 2012, functionality: fully functional, Grinding unit with contact roller DIAGONAL unit with segmented sanding pads (35 mm segment width) 2 motors with 15 & 11 kW, 400V Pass-through height: 200 mm Constant working height (machine upper section adjustment) Abrasive belt dimensions: 1350 x 2000 mm Automatic thickness adjustment ENORMATIC PLC control with touch screen and operating hours counter Machine version for INTERMEDIATE LACQUER SANDING Pneumatic lifting/lowering of the contact roller Vacuum device complete with integrated fan Infinitely variable feed rate via touch screen Infinitely variable sanding belt speed and belt air blow-off on 2nd unit Drive roller for sanding pads rubber-coated Machine dimensions approx. 1,800 x 1,800 x 2,100 mm (LxWxH) Weight approx. 2,800 kg Iisdpfx Asx Eh Svokxja

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size. Isdpfx Akew Naanoxjia

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options Ijdpjwwtuisfx Akxoia - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Ijdpev T Ilvsfx Akxsia Storage location: Bad Wimpfen

Condition: good (used), Year of construction: 1995, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine Ijdjcg Al Sopfx Akxoia -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,551 h, total width: 1,790 mm, total height: 2,150 mm, overall weight: 2,300 kg, product length (max.): 1,690 mm, This Kundig Premium-2 1350-RG belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt release system. Accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Consider the opportunity to buy this Kundig Premium-2 1350-RG belt sander. Contact us for more information about this machine. Iedpfx Asx D E I Eokxeia Additional equipment • Steel roller • Rubber roller with a device for a needle roller (unused) • Belt release Machine Benefits Technical Machine Benefits • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity unspecified) • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency-controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency-controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Maximum current consumption RP/RE: 36 A • Maximum current consumption RE-L: 56 A • Required slow-blow fuse minimum RP/RE: 40 A • Required slow-blow fuse minimum RE-L: 63 A • Cable cross-section reduced load RP/RE: 5x6 mm² • Cable cross-section reduced load RE-L: 5x10 mm² • Cable cross-section correct dimensioning RP/RE: 5x6 mm² • Cable cross-section correct dimensioning RE-L: 5x10 mm² • Extraction connection for 1st unit diameter RP/RE: 180 mm • Extraction connection for 1st unit diameter RE-L: 180 mm • Extraction connection for 2nd unit diameter RE-L: 180 mm • Extraction connection for belt blow-off diameter RE-L: 150 mm • Required total extraction connection diameter RP/RE: 200 mm • Required total extraction connection diameter RE-L: 300 mm • Air velocity at extraction openings RP/RE: 22 m/s • Total air volume for dust extraction RP/RE: 2000 m³/h • Total air volume for dust extraction RE-L: 5400 m³/h • Negative pressure RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for belt or workpiece blow-off per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Maximum workpiece width RP/RE: 1350 mm • Minimum workpiece thickness RP/RE: 4 mm • Maximum workpiece passage height RP/RE: 200 mm • Working height including machine base RP/RE: 910 mm • Feed speed range RP/RE: 3–15 m/min • Total machine length RP/RE: 1690 mm • Total machine length RE-L: 1850 mm • Total machine width RP/RE: 1790 mm • Machine height including base and extraction outlet RP/RE: 1950 mm • Maximum machine height including base and extraction outlet RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Extra Information Machine still under power