Industrial robot

Kuka Roboter GmbH KR 210 R2700 prime

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations - rapid deployment at a new location - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. - Standard Configuration The complex is equipped with: - industrial KUKA robot Dcedpjzawm Hjfx Ailen - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit Djdpfjd Iin Hex Ailscn · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Used, untested robot. No technical documentation available. Not tested. Dcodpfx Aiogu U Itjlon

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dodjv Rwu Uspfx Ailocn Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Dcjdpfx Aijrzq Areljn 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Year: 2003 Controller Cabinet: KRC2 Dcodohakfaopfx Ailsn Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: KR210 R3100 ultra KRC4, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,095 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR210 R3100 ultra Controller: KRC4 Rated Payload: 210 kg Reach: 3095 mm Dsdpfx Asxxamloilocn General purpose: For heavy payloads and much more. Delivery time: To be agreed upon. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash), especially useful for 3D applications such as 3D milling, 3D printing, and 3D trimming. About: Our daily business is the reliable supply of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Established in 2002. We ship worldwide.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional Dsdpfx Ajvllxdjilocn

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service Dodpfxovfm I Te Ailocn - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: used, Year of construction: 2004, Technical details: Dsdsu Nc Rispfx Ailscn x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *