Injection Molding Machine

KraussMaffei KM420-4300CX

Condition: ready for operation (used), Year of construction: 2007, operating hours: 72,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 100 mm, displacement volume: 2,827 cm³, Clamping unit: Clamping force 4200 kN Mould opening force, max. 250 kN Travel force movable platen opening 124 kN Travel force movable platen closing 102 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 800 x 800 mm Mould opening stroke 1020 mm Mould height min 380 mm Max. daylight 1400 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1490 bar Stroke volume 2827 ccm Shot weight (PS) 2573 gr. Injection rate 746 ccm/s Screw speed 195 1/min Plasticising rate max. 165 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,60 x 2,50 m Ncodpfx Ajzd Smbjlneu Total machine weight 23500 kg Max. mould weight 6700 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR 150 X: 900 mm, Servo Y: 900/900 mm, Servo Z: 2500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve on movable plate - 1 x core pull on movable plate - 6 x Hotunner controller - Accumulator - Robot inteface according to Euromap 67

Condition: like new (used), Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Nsdpfx Alov S E Dgonocu Technische Ausstattung anfordern.

Condition: excellent (used), Year of construction: 2011, operating hours: 54,980 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 90 mm, clearance between the columns: 1,350 mm, displacement volume: 2,290 cm³, injection pressure: 1,839 bar, mold height (min.): 978 mm, opening stroke: 1,020 mm, plate width: 1,710 mm, plate height: 1,650 mm, overall weight: 35,000 kg, number of injections: 1, Equipment: documentation/manual, KRAUSS MAFFEI KM 420-4300 CX with OVERSIZED CLAMPING UNIT Year: 2011 Pump Hours: 54.968 Control: MC 5 Injection unit, it is STANDARD for this type of machine: Screw: 90 mm Nsdozcam Ujpfx Alnocu Shott volume: 2290 cm3 Injection pressure: 1.839 bar The Clamping unit is oversized: Plates: H x V: 1.710 mm x 1.650 mm Tie bars distance H x V: 1.350 mm x 1.250 mm Min mould: 978 mm Daylight: 1.998 mm Because of that the weight of the machine is 35.000 kg instead of 24,2 t. The machine is built with Clamping force: 350 t, because of such needs from the buyer. The machine has possibility to start injection 2-3 mm before machine lock the mould. Last service: 26.05.2025. Last inspection: January this year. Condition of the Screw: Cmk is 3,62 Changed Accu bottles. It is possible to get some video on it in running and can be sent by WhatsApp. The machine is available some time W 35-38 (August- Sept). Until that it will be in running, but with very short series. We are speaking only about the machine, no other equipment is included. Maybe, it will be one SEPRO robot (big one) from one other machine, not this on the photos. Model: 5X – 35 Year: 2017

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Njdpfx Asu Rptyelnscu Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: like new (used), Year of construction: 2021, Equipment: documentation/manual, Fanuc Roboshot 𝛼-S100𝑖B (2021) with Warranty! Clamping force: 100 t Tie bar distance: 460x410 mm Platen size: 660x610 mm Screw diameter: 28 mm (up to 30% glass resistant) Injection volume: 58 cm3 Injection speed: 350mm/s Type: Horizontal Drive: Electric Hours: 35 (only!) Possible to buy another screw diameter on request: 36mm or 40 mm screw More information on request. 12 months Warranty in price. Ncsdox Elvuopfx Alnsu

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line with Injection Molding Machine, Model 110/750 CX with Digicolor Drying Station, Model DW 25/40 (serial 191511221); Krauss Maffei handling unit, Model LRX 100 (serial 2118836); Keyence Deutschland GmbH Discharge Blower, Model SJ-FW; and associated belt conveyors. Ncsdpfxjmn S Efe Alnsu

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Ncedpfewq D Efox Alnou Technical Details 75mm screw Injection pressure: 1635 bar Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Condition: good (used), Year of construction: 2011, Load moving system CBM 240 / ST 120 MACH-ID 923 Type: CBM 240 / ST 120 Year: 2011 Njdpfx Alewvhrtonocu

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit Njdpfox Nkp Isx Alnscu • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: reconditioned (used), Year of construction: 2006, operating hours: 60,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture 2006. Screw diameter 85mm. MC5 control. Approximately 60,000 working hours. The machine is delivered REFURBISHED by our team of technical experts and in optimal working condition. We can offer commissioning services at our customer's premises, ensuring full functionality upon installation completion. Technical Details Screw diameter: 85mm Injection pressure: 2242 Bar Injection volume: 2695 cm3 Injection weight: 2452g (PS) Year of manufacture: 2006 Working hours: 60,000 Minimum mould thickness: 550/1100mm (Min/Max) Maximum platen distance: 2100mm Opening stroke: 1600mm Nedpfxew Avafo Alnjcu Tie bar distance: 1120x1000mm Platen dimensions: 1600x1530mm Clamping force: 8000 kN