Injection molding machine

KraussMaffei KM 500/2700C2

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor Kdjdjud N Hdopfx Ahvoi WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line with Injection Molding Machine, Model 110/750 CX with Digicolor Drying Station, Model DW 25/40 (serial 191511221); Krauss Maffei handling unit, Model LRX 100 (serial 2118836); Keyence Deutschland GmbH Discharge Blower, Model SJ-FW; and associated belt conveyors. Kodpfsmn S Efox Ahvsdi

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with a built-in 21.5" operator panel with a full-colour touchscreen. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force front/back: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Hydraulic oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part removal to the operator’s opposite side Axes: X-axis (from mould): 900 mm, servomotor Y-axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z-axis (transverse): — Dimensions and weight Kdsdpfx Aexdd Spohvsi Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with colour touchscreen display. Plasticising Unit Complete plasticising unit for thermoplastics, screw diameter 50 mm, with check valve and open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical data (standard version) Clamping Unit Kdsdpfoxdd N Usx Ahvoi Clamping force: 1,600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force front/rear: 23 / 10 kN Injection Unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection rate (standard): 177 cm³/s Screw speed (standard): 265 rpm Electro-hydraulic System Pump motor power: 22 kW Installed heater power: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 l Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + drives + parts) Part removal on operator-offside Axes: X-axis (from mould): 620 mm, servomotor Y-axis (vertical, with brake): 1,200 mm, servomotor Z-axis (crosswise): 1,500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

Year of construction: 2010, condition: used, HB THERM 140 Z 2 (2010) 16KW Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Kdodpev H Ad Hjfx Ahvsi Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Condition: like new (used), Year of construction: 2021, operating hours: 19,641 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 635 mm, displacement volume: 353 cm³, mold height (min.): 250 mm, opening stroke: 500 mm, total length: 6,660 mm, total width: 2,000 mm, total height: 2,352 mm, overall weight: 18,400 kg, heating capacity: 18.7 kW (25.42 HP), power: 100 kW (135.96 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 160 A, Equipment: documentation/manual, KM PX 201-1000 200 tonnes Full Electric Like new, 19,000 operating hours 3 hydraulic core pulls Hydraulic ejector Kdedpfexwl Eksx Ahvji Mold heating: 24 zones Water supply: 16 zones Injection unit heating: 6 zones Screw diameter: D-50mm

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: - Opening: 105 kN - Closing: 95 kN Mounting plate (H x V): 1,060 x 1,095 mm Clear space (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Temperature control zones (cylinder heating): 6 Dry cycle time: 1,550 1/h Oil filling: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 t (L/W/H): 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Drive capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard / option: 285 / 349 rpm Standard or stage 1 screw speed: 95 PS Optional or stage 2 screw speed: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT colour display and 3.5" floppy disk drive for data backup Kdsdoxu Uvaopfx Ahvei Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant design, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 17326ä

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers of injection moulding machines, are offering the following well-maintained pre-owned injection moulding machine for sale. Naturally, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers for used injection moulding machines for over 25 years. Kdsdpfxeyf Uy Uj Ahvji Current update – Tax note and benefit for purchasing used machines: From 01/07/2025, used machines can also benefit from a special depreciation rate of 30% per annum for tax purposes. In addition to the lower purchase price compared to a new machine, you can claim the same depreciation amounts as you would for a new machine. Keyword: Growth Booster (§7 Paragraph 2 EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower 2-Colour 2C machine Control: MC6 Year: 2014 Machine-No.: 61020507 Operating hours: 47,137 h Complete maintenance record for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal: Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd injection unit 180 vertical: Screw diameter: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Clamping unit: Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Weight: 9,000 kg Extras: Nozzle side: Needle shut-off A+C 1 x hydraulic core 1 x pneumatic core 1 x air blow Ejector side: 1 x hydraulic core 3 x pneumatic core 1 x air blow Water circuits BGS: 6 each on nozzle and ejector side BluePower technology for up to 40% energy savings The machine is in very good and well-maintained condition and can be inspected under power. Any peripheral equipment shown is NOT included in the offer! The machine is available immediately. Free loaded onto buyer's truck or free delivered to site against reimbursement of freight costs. Additional information on our machines and company: - We only sell machines purchased from running production, stored at our Hanover warehouse - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets - We are NOT brokers dealing in third-party goods - All machines offered come from successful companies where maintenance and care are a matter of course - All machines offered can be inspected at our warehouse

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm Kedpfsyhbq Eox Ahvedi • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: used, Year of construction: 2002, Opportunity to buy a DEMAG injection moulding machine with 1000T clamping force and 140000 working hours. Can be inspected under power upon appointment. Availability: 06/2026 Kedpfx Ahjyq Dqgjvedi Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mold height: 500 mm Max. mold height: 1200 mm Distance between tie rods: 1400 × 1120 mm Plate size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ($P_{max}$): 190 bar Max. flow rate ($Q_{max}$): 486 l/min System current: 409 A Heating current: 154 A