Injection molding machine

KraussMaffei KM 300 1400 C1

Condition: reconditioned (used), CORNUCOPIA KN550 INCRUSTATION MACHINE by RHEON Rheon's Cornucopia KN-550 machine is the ideal tool for use in food production, from the prepared food segment to the production of confectionery and bakery products. Thanks to its patented inlay technology, producing high-quality products becomes much easier. The KN-550 is a machine that is capable of producing a wide range of product weights. Even round products up to 300 gr weight are no problem for it. Technical data: - product weight range: 10-300 g, - capacity: max. 400 kg/h depending on the type and consistency of the product, - capacity: 10-90 pcs/min, - product length: 0-500mm, - ratio of outer mass to filling: 1:0 - 0:1, Prodpeuwc Haofx Adned - forming: spherical, bar and ribbon, - loading hopper capacity: 2 x 20 ltr, - belt speed: 1.3-22m/min, - power: 3.2kW. - Open Top Pizza Production

Year of construction: 2003, condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Prodpfx Adjiiv Aqonod

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Predjtyyn Hspfx Adned

Condition: excellent (used), Year of construction: 1998, Injection moulding machine With two components Kraussmaffei Mutliinject KM200-1000-390 CZ Year 1998 Closing 200 TO Prodpsfx Tztjfx Adned Scrow 60 mm- 566g Scrow2 - 35 mm - 178 g Tie bars wide 560x560

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Prjdpouiykdefx Adnod

Condition: like new (used), functionality: fully functional, 2 x 150 litre dryers with the option to connect an additional 150 litre tank. Prjdoxk Tx Sjpfx Adnod

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2004 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Prsdexg H Hbjpfx Adned Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 61037426, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 792 cm³, injection pressure: 2.42 bar, injection weight: 721 g, mold height (min.): 250 mm, ejector force: 47,000 N, ejector stroke: 200 mm, opening stroke: 1,250 mm, installation height: 700 mm, total length: 8,230 mm, total width: 2,320 mm, total height: 2,210 mm, overall weight: 19,500 kg, heating capacity: 292 kW (397.01 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 3,700,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The all-electric PX series is the answer to your questions about more flexibility with further increases in productivity. Robust mechanics, high-precision and dynamic drive technologies and intelligent energy management make the PX a reliable, productive and efficient performer in any injection molding operation. An ergonomically optimized working height, maximum clearance under the clamp and excellent accessibility ensure maximum user-friendliness. The PX series impresses with its flexibility throughout its entire service life. TECHNICAL DATA: KM 251 / 2000 PX G02 (order 38621992) CONTROL  MC6 with 20.5" TFT color screen and multi-touch function Psdpfeuaavzsx Adnerd CLAMPING UNIT  Clamping force kN 2500  Mold opening force, max kN 375  Clear width (h x v) mm 735 x 685  Clamping platen (h x v) mm 1000 x 950  Tool installation height min. - max. mm 250 - 700  Opening width mm 1250  Mold opening stroke max. mm 550  Hydraulic ejector drive  Ejector stroke mm 200  Ejector force forwards/backwards kN 47 / 22.5  Ejector speed forwards/backwards mm/s 350 / 350  Max. Mold weight kg 3700 SPREAD UNIT  Screw diameter / type mm 60 / standard  Effective Ls/D ratio 23.3  Injection pressure bar 2420  Stroke volume cm³ 792  Shot weight at max. stroke for PS g 721  Injection speed mm/s 125  Injection flow rate cm³/s 353  Screw drive/speed 1/min 327  Plasticizing flow rate g/s 82.8  Nozzle contact force kN 57 ELECTRICAL PARAMETERS  Connected load kW 63.5  Installed heating capacity kW 29.2  Power supply V / Hz 400 / 50 WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 19.50  Length x width x height m 8.23 x 2.32 x 2.21 ADDITIONAL EQUIPMENT  Enlarged mold opening width  Low-wear plasticizing (ZE23.03)  Hydraulic core pull 2+2-fold  Core pull pneumatic 1+1 - fold  Air valves 1+1-fold  Pneumatic cascade 4-fold  Euromap interfaces E18, E67, E77  Water battery 4 - compartment  Hot runner control points 12 - compartment  Adaptive Process Control (APC) The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2006, operating hours: 45,200 h, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM200-700C2 Baujahr: 2006 Schließkraft: 200 Tonnen Holmabstand 560 x 560 mm Prjdpfxexpnpie Adnsd Schnecken DN: 45 mm Max. Hubvolumen: 305 cm³ Spritzteilgewicht: 278 g/PS Steuerung: MC5 Ausstattung: Roboter GHS Baujahr: 2004 Verschleißarme Plastifizierung 1 St. Kernzug 1 St. Förderband Sicherheitszaun Ca. 45.300 Betriebsstunden

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Psdpfoxnd Sqex Adnsrd Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding