Continuous Flow Oven

Kohnle TE 1000-100/60-1000

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Tedeq Ttz Eopfx Af Tef

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Tedjppyhtopfx Af Tof Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: used, Year of construction: 2010, turning diameter max. 410 mm turning length 1.235 mm control IT / Turn Plus Heidenhain greates pass round over bed 700 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 35 / 45 kW max. Torque 770 Nm spindle head 220 h5 spindle diameter in front bearing 160 mm max. usable bar diameter 95 / 104 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 4.000 min -1 power capacity driven tool-stations 12 kW max. Torque 36 Nm Tedpfxevzhiws Af Tsf tool taper VDI 40 DIN 69880 turret change time 30°: 0,4 sec. Y - Axis 120 (+/- 60) mm x-axis 300 mm z-axis 1.300 mm y-axis +/- 60 mm tailstock 1.200 mm taper of center MK 5 clamping capacity 1.400 daN rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min total power requirement 60 kVA weight of the machine ca. 7,7 t dimensions of the machine ca. 6,0 x 3,5 x 2,5 m CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Tool drive - Direct measuring system - Bar machining package - Connection for bar feed / bar loading magazine

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Tsdpfx Asvcyf Tsf Tof Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Year of construction: 1986, condition: refurbished (used), Chamber filter press, cpl. General overhaul in stainless steel lining, 82 filter plates in PP (food safe), 30 mm cake thickness, press capacity approx. 1100 litres, filter area 96 m2, fitted new filter cloths, max. 15 bar feed pressure possible, closed outlet via 2 diagonal corner holes, automatic plate transport and filter cloth washing system in stainless steel , high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with base for raising (stainless steel), control cabinet Todpjn Dw Nkofx Af Tjf

Condition: good (used), Spectro CIROS CCD Water Analyser - height: 105cm - width: 150cm - depth: 75cm Good condition fully functional can be inspected and tested on site. Shipping also abroad. Inspection : Basically I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please ask questions before purchase to avoid any ambiguity. If you have general questions or would like to make an appointment for a viewing, I can be reached at any time at the telephone number below. Errors in the description and prior sale reserved. Tedpfjfiqn Uox Af Tsf The value added tax is shown separately on my invoices. Dispatch with forwarding agent.

Condition: used, Sharpening machine EWAG WS 11 SP Tjdpewp T Nkofx Af Tjf

Condition: used, Year of construction: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete dewatering system in container Year of construction: 2018 Sludge throughput: approx. 0-40m3/h Solids capacity: max. 1.2 TS/h Equipment: front double door, side entrance door, fan heater, lighting, sockets, etc. Rotor: max. speed 3650 min-1 Drum diameter: 470 mm System: Container system Interchangeable bridge system for accommodating the downstream system components. Piped and wired ready for operation as a functioning unit. Container system design: Stand construction, clad with sandwich panels and holders for transportation with interchangeable bridge systems. Accessories: FHM preparation station PolyMix 4000SP, measuring equipment, switchgear Feed pump: Seepex BN 52-6LS Discharge conveyor: SS D320 double trough spiral conveyor Dimensions: L 7820mm x W 2500 mm x H 3880 mm Empty weight: 14500 kg Weight in operation: 15000kg Voltage: 400V Todpfx Aeu R Icmsf Tjf Power consumption: 142 A Power consumption max.: 70kW Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate drain: DN200 Solids discharge: Spiral conveyor Further information: see photos

Condition: good (used), Year of construction: 2007, operating hours: 14,029 h, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, For sale is a Gildemeister NEF 400 CNC lathe. The machine is in good condition, ready for immediate use, and fully functional. Technical specifications: Year of manufacture: 2007 Control: Heidenhain CNC Pilot 4290 Operating hours: 14,029 h X-axis (transverse travel): approx. 220 mm Z-axis (longitudinal travel): approx. 700 mm Max. turning diameter: approx. 400 mm Tjdpfswig R Ijx Af Tsf Max. swing diameter over bed: 400 mm Max. swing diameter over cross slide: 270 mm Max. turning length: 650 mm Spindle bore: 65 mm Speed range: 0 - 4,000 rpm Drive power (100% duty cycle / 40% duty cycle): 12/15 kW Max. torque: 400 Nm Number of tool positions: typically 8 Tool holder: VDI 30 Tailstock travel: 680 mm Tailstock mount: MT 4 Clamping pressure: approx. 6.8 kN (hydraulic) Space requirement (L x W x H): approx. 2.5 x 1.7 x 1.8 m Machine weight: approx. 2.8 t Chip conveyor included in the offer Accessories such as tool holders are not included in the offer Can be offered separately Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 15 [kW] - Spindle speeds : 5500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 15 [kW] - Spindle speeds : 5500 [rpm] - Max. bar diameter : 42 [mm] Tjdpfx Afouhampe Tsf - C axis indexing precision : 0.001 [°] - Travel : 330 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 410/400 [mm] - Y stroke : 200 [mm] - B Axis stroke : -25/+115 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK40 - Spindle speeds : 30000 [rpm] - Spindle power : 8 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 60 - Tool exchange time : 1.2 [sec] - Number of positions : 60 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3300 x 2900 [mm] - Machine height : 2100 [mm] - Machine weight : 5000 [kg] MACHINE HOURS - Number of working hours : 11659 [h] EQUIPMENT - CNC : Fanuc 31i model A5 - Linear scales - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle - Oil mist extractor : ELBARON RON/A 100 DV - Spindle cooling unit - Workpiece probe : Renishaw OMP40-2 - Parts catcher - 1 NAKANISHI HTS1501S spindle : 150.000 [rpm] - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Bar puller