Filtration Unit

KNOLL Turbofilter 1000 SF/2000

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Fjdpfx Aajd Dhw Nelepg

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Fpsdjydaadopfx Aaleg Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Fpsdpfx Aasx Anpvelsg Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: used, Laser ACSYS Lasertechnik GmbH PIRANHA II Multi FL20s Fsdpfxeu E U Tno Aalopg

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Fodswu Rgqopfx Aaljpg Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Fsdpfx Aswg Taksalspg Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance Z-axis: 700 mm, spindle motor power: 32,000 W, controller manufacturer: SIEMENS, controller model: C200-sl, number of axes: 5, This 5-axis Index C200 was manufactured in 2023, offering advanced capabilities for horizontal turning. Ideal for precision and efficiency in metalworking, this machine represents a significant asset for enhancing production quality. Consider the opportunity to buy this Index C200 horizontal turning machine. Contact us for more information. Additional equipment • Software options: OPC UA for master computer connection (max. 200 variables). ChipMaster cycle for chip breakage control. • Environmental data: Noise level: 73.8 dB(A) Machine Benefits Fpodeyyuvtopfx Aalog Technical Machine Benefits • Control system: based on sinumerik 840d solutionline (sl) with sinamics s120 drives. 18. 5" tft color display with pct-touch (ip65). Siemens operate user interface in german. • Interfaces: 4x usb 2. 0 (2 on the control panel, 2 in the control panel). Network-capable for nc data transfer (logical drives). • Safety: siemens safety-integrated (profisafe). • Turret mechanics: hydraulic locking, ac motor with face gearing. Drive power per tool carrier: 10 kw (25 % ed), max. 8,000 rpm. • Tool holder: cylindrical shank d25x48 (din69880) with w-slots for higher repeat accuracy. Driven tools possible in every station (only rotating in working position). • Cooling unit: 13 kw for hydraulics, spindles and control cabinet. Connection for cooling water (20°c ±2°c, 30 l/min, glycol 25 %). • Chip conveyor: hinged belt conveyor (made by knoll) with 180-liter container, discharge height 840 mm. Cooling lubricant system: 750-liter container, 8-bar/20-80-bar pumps. • Bar loader interface: unimag4-compatible (external loaders require specific cover). Maximum bar length: 1,035 mm (short bar operation). Gantry pick-up device: pneumatic gripper (Ø 10-90 mm, max. 3. 5 kg). Conveyor belt with switch for finished parts/remaining parts. Extra Information Control Unit Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Rated power: 54kW Connected load: 65kVA Rated current: 94A Max. back-up fuse: 100A Main Drive Main spindle and counter-spindle Spindle head mounting: OD 140mm, ID 85mm Front bearing diameter: 110mm Torque max. (100%/40%): 125/170 Nm Clamping pressure min./max.: 8/80 bar Piston area pressure: 57cm² Piston area tension: 57cm² Compressive force max.: 45600 N Tensile force max.: 45600 N C-axis: Drive: Hollow shaft motor of the spindle; angle measuring system directly on the spindle Position spread (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool carrier 1 X-axis working path: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Z-axis working path: 320mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5000N Y-axis working path: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48 Tool carrier 2 X-axis working path: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Z-axis working path: 550mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5000N Y-axis working path: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48 Tool carrier 3 X-axis working path: 180mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Fjdpfx Aaoyxn Dnolepg

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available Fedjxrg E Iopfx Aalspg saw blades at an additional cost.

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Fpedpfsihf R Usx Aalog Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window