CNC Lathe

Kern D23 CNC

Condition: excellent (used), Year of construction: 2016, Machining center Hodpotiauhsfx Ak Dol Make KNUTH Type EcoMill 350 CNC

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor Hodpfx Ajylw Stek Dsl • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Hedpfx Akeht Hg Ds Dsl Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: used, centre height: 140 mm; Hodpfx Ajcbhl Nek Dol table size: 150x1050 mm; longitudinal path (manual): 600 mm; transverse path: 230 mm; height adjustment: 250 mm; 2 engine speed: 1500-3000 rpm; 6 grinding spindle speed: 2000-6000 rpm; biggest grinding wheel diameter: 250 mm;

Condition: refurbished (used), For Sale: EOS P730 – Guaranteed Working Condition This EOS P730 has been fully cleaned and revised by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Synrad 48-5 CO2 lasers, this high-performance machine is designed for demanding SLS production environments. Available Accessories: We offer a variety of optional accessories to enhance your setup, including: • Docking station • Transitube • IPCM P • Unpacking station • Build frames Upgrade Options: Take your EOS P730 to the next level with available upgrades, such as: • Coherent C70 laser upgrade for enhanced performance • Laser window upgrade for improved efficiency • And more! Contact us for details. Materials Highlight We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers excellent performance at a fraction of the cost of OEM powders, helping you reduce production expenses without compromising on quality. Services Included: • Transport & Installation: Safe delivery in original EOS packaging and professional installation services. • Warranty & Maintenance Plans: Flexible options available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: Cost-effective consumables like our plug-and-play PA12, fully tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Choose IM3D for dependable machines, premium materials, and the expertise to maximize your SLS production. Contact us today for more information or specific inquiries! Hsdjq E I Anspfx Ak Dsl

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm spindle taper MK 4 bore spindle stroke 170 mm spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min Hjdpfx Akjxwzg Re Dol distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2004, Year of manufacture: 2004 Sauter 8-position VDI 20 turret with all stations powered tools Spindle holding brake Interpolating C-axis Reinforced coolant pump 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color display Working area & capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Distance between centers: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (according to DIN 55027) / Mount MK 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & axes Rapid traverse (X/Z): 8 / 10 m/min Feed speed: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool turret & tailstock Turret: 8-station disc turret (Sauter), all stations powered Speed for driven tools: Max. 6,000 rpm (3.8 kW) Tooling system: VDI 20 (DIN 69880) Tailstock: Quill diameter 70 mm, stroke 120 mm, MK 5 mount Dimensions & capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Hedpfey Dckajx Ak Dsl Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10-115 mm Travelling steady rest with rollers, guide diameter 10-115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-action chuck with lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation, includes speed monitoring with separately adjustable speed supervision. Tooling equipment: fixed turning tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used in single-part production for prototype manufacturing. Low spindle running hours Available immediately.

Condition: ready for operation (used), A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible. Hodpfx Akjx Hz N Ho Del

Condition: ready for operation (used), Year of construction: 2007, Travel X/Y/Z: 800mm/550mm/550mm, tool holder: HSK63, spindle speed: 12000rpm, tool positions: 65, control: Siemens 840D, spindle hours: approx. 16000h. 3-axis robot System 3R Transformer WorkMaster, year of manufacture: 2008, transfer weight: 150kg, stroke: 1500mm, pallet positions: 2x12. Including System 3R GPS 240 zero-point clamping system, Knoll chip conveyor, Knoll paper band filter, Blum LaserControl laser measuring system, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Hsdpfx Aexg Rigek Dsl

Condition: good (used), EOS Type: P390 Hedexbgnbjpfx Ak Dol Eosint P 390 – Laser Sintering System (SLS) Operating hours: 6,735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & operating terminal Exchange frame with build platform Multibox is a typical accessory for powder handling in EOS systems, enabling transport and interim storage of materials. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, power consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (± 0.1 °C) Dimensions & weight: Machine (W × D × H): approx. 1,230 × 1,175 × 2,100 mm Control cabinet: 610 × 790 × 2,100 mm Operating terminal: 950 × 700 × 1,550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-cooled – High-pressure pump Technical data: Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ± 0.1 °C Cooling type: air-cooled Pump: high-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: water or water-glycol Connection: NPT version ("AN") Power supply: 200–230 V AC, single-phase Refrigerant: R407C Weight: approx. 1,110 kg Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) If you have further questions, we would be pleased to answer them by phone.