Cycle-controlled lathe

KERN CD 282

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2042.6958-01, quill diameter: 160 mm, overall weight: 8,000 kg, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, distance between centers: 3,000 mm, VDF lathe type 800 DUS in very good condition. Specifications: Heidenhain Manual Plus 620 control Speed 6-1600 rpm (2 steps) Swing over bed 800 mm Spindle bore 128 mm Distance between centers 3000 mm Spindle mounting DIN 55027 No. 11 Year of manufacture 2017 Dimensions 6,320 mm (including chip conveyor + 1,200 mm) 2,930 x 2,440 mm Weight 8,000 kg Ijdpfx Ahox S Nv Sjvjtd Accessories: Heidenhain Manual Plus 620 control Steady rest 250-500 mm 4-jaw chuck 700 mm 4-jaw chuck 450 mm 3-jaw chuck 315 mm Parrat tool holder with 4 holders

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Isdod Amgkepfx Ahvotd Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Itsdpfx Aexlza Hehvsd Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool Iodeh Hvk Aspfx Ahvetd - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Year of construction: 2001, condition: used, Cazeneuve Maxica 590 With collet Ijdpfjh Aylvox Ahvetd Control: SOMAB NUM SP + S 5

Condition: used, Year of construction: 2006, Technical details: turning diameter: 490 mm turning length: 2000 mm total power requirement: 15/20 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 2,8 x1,85 x 1,9 m In like new condition Heidenhain cycle control Torsion-resistant bed, made of high-quality cast iron with hardened, precision-ground guideways and a glass scale on the X-axis Safety clutch on the Z and X axes Sealing air with carbon filter in direct position measuring system High accuracy and rigidity of the lathe spindle thanks to precision spindle bearings, spindle bore Ø 93 mm standard, optional Ø up to 130 mm Iodpfowmcx Asx Ahvstd Solid tailstock, quill Ø 90 mm with internal taper MK5 Large overhang above the facing slide for easy accessibility during shaft machining. The machine has Teach-in CNC Programms. Control: MC420. Tool holder: SAUTER. *

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Iedoxn Axcepfx Ahvotd

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 430 mm, spindle bore: 80 mm, turning length: 1,500 mm, turning diameter: 430 mm, quill stroke: 150 mm, quill diameter: 70 mm, spindle speed (min.): 3,000 rpm, bed width: 350 mm, total length: 1,900 mm, total width: 1,500 mm, total height: 1,600 mm, spindle motor power: 11 W, overall weight: 3,500 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, three-jaw chuck diameter: 250 mm, Equipment: rotational speed infinitely variable, The Seiger SLZ 420K is a conventional lathe known for its robust cast-iron bed, precise slideways, and digital support features. It is well-suited for single-part production, repairs. Dimensions and capacities • Swing over bed: 430 mm • Swing over cross slide: 220 mm • Center distance: 1,500 • Bed width: 350 mm Spindle and drive • Spindle bore diameter: 80 mm • Spindle head: DIN 55027, Size 6 • Spindle diameter in front bearing: 110 mm • Main drive: 11 kW • Speed range: 1–3,000 rpm Tailstock • Quill diameter: 70 mm • Quill stroke: 150 mm • Morse taper: MK 5 Control and features • Display: Heidenhain Positip 8016 digital display • Linear scale: Heidenhain linear scales on the X- and Z-axes Itjdpfxjxr U E Ao Ahvod • Feed rates: V-constant and controllable feed rates via a potentiometer • Rapid traverse: Functionality in both the X- and Z-axes • Handwheels: Mechanical handwheels for manual operation • Bed: High-quality, torsion-resistant cast-iron bed with hardened and precision-ground slideways The Heidenhain Positip 8016 is a digital measuring instrument with a touchscreen, suitable for manually operated milling, drilling, and turning machines. The display offers various functions to increase productivity and accuracy. Key features • Touchscreen operation: The device is equipped with a robust 12.1-inch color TFT touchscreen, which can also be operated while wearing gloves. • Multiple axes: The system can control up to six axes, four of which are standard linear, angular, or coupled axes, and two are optional. • Extensive functions: The Positip 8016 includes features such as drilling patterns, tool radius compensation, a cutting data calculator, and the ability to save positions. • Distance-to-zero function: This function helps you move quickly and accurately to the next position by working towards a zero value. • Programmable: Recurring machining steps can be saved as a program, which speeds up the production of small batches. • Interface: The display features interfaces such as Ethernet and USB for importing and exporting data. • Robust design: The device is specially designed for use in workshop environments and has a sturdy aluminum housing with passive cooling.

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Isdpsrmkfnofx Ahvetd Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Year of construction: 1981, condition: used, Make cover Type FP 4 Table: Iodpfxoihp U Dj Ahvstd dimensions 1000 x 470 mm longitudinal movement X - axis 700 mm transversal movement Y - axis 400 mm vertical movement Z - axis 450 mm projection spindle 50 450 mm spindle mounting ISO 40 Number of spindle speeds 18 Spindle speed range 31,5 1600 rpm Number of revolutions horizontal spindle 18 pcs. Speed range horizontal spindle 31,5 1600 rpm Weight machine 2000 kg feeds X Y Z axis 18 pcs 10 500 mm/min Accessories milling head with quill Table 1000 x 470 mm