Belt sanding unit

KED Kurt Ehemann Bandbreite 295 mm

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Hodjt Iw Ryepfx Agfsff

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Hfodpfxevviyte Agfjf Storage location: Nattheim

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. Hedowyda Uspfx Agfoff (We answer inquiries only when your address and telephone number are provided!)

Condition: used, Year of construction: 1993, machine/vehicle number: 931200665, Verpackungssystem - Wrapping & Shrinking Machines BVM SM4012 K-SC4030SYear 1993 - Serial-No. 931200665 Full automatic packaging SM 4012K Einlaufbreite max. 420mm / Infeed width max. 420mm Shrink tunnel SC4030S Format (Breite x Höhe) / Size (width x high) 450mm x 330mm 5m Chain gripper feeder Delivery band GUK Feeder for single sheets Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hfodpeh Ax Hfsfx Agfjf On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2025, total length: 1,100 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 260 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Motor power: 2.2kW - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hfsdjw N St Hepfx Agfof VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, Band saw AKE -1400 Speed: 20-80 m/min Saw width: 100-180 mm Electric motor: 2x45 kW Diagonal sawing up to 15 degrees Hfjdpfxetp Rh Is Agfjf Weight 12.5 tonn

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Hfodeu Nu Hiopfx Agfef Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: refurbished (used), functionality: fully functional, Vibro screen type HVSM 1000x3500 generally reconditioned (workshop refurbished) Hfjdpowqx Hksfx Agfjf with new bearing (spherical roller bearing) and new oscillating elements Make: HAAS Year of manufacture: 1996 Condition: good ( reconditioned) Channel width: approx. 1000 mm Channel length: approx. 3500 mm Gutter height: approx. 150 mm Wall thickness: approx. 5 mm Discharge height: approx. 150 mm Total height: approx. 300 mm Screening capacity: approx. 10 m³/h (for wood chips and sawdust) Fractions: 2 Screen area: approx. 2.2 m² per screen mesh size Screen decks: 1 piece (screen zone D = 10 mm, L = 2,200 mm) Drive power: approx. 4.0 kW Weight: approx. 800 kg Machine colour: RAL 6011 Reseda green without electrical installation Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - waste wood - bark Screening machine | vibrating screen | vibro screen | vibro screening machine | vibrating screen | wood chip screen | screening machine for wood chips | screening machine for cogeneration plant

Condition: used, Year of construction: 2025, operating hours: 57 h, Weight: 11.600 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 24111638 - Operating hours: 57 - Main motor power [kW]: 30.0 - Max. cutting height [mm]: 940 - Table length [mm]: 6000 - Table width [mm]: 1050 - Fuse [A]: 100 - Power [kW]: 51.0 - Transport weight [kg]: 11600kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Hodpfsx Npwwjx Agfeff

Year of construction: 1999, condition: excellent (used), 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Hjdpfxoxtwwkj Agfeff 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.