Band saw

KASTO Kastotec A3

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed Lajdpfxju R R Acs Agroi 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Lasdpfx Agoqrqvhoroi Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details. Ledogb Ec Hspfx Agreai

Condition: ready for operation (used), spindle bore: 84 mm, Echea lathe model AII of 5000mm e.p diameter over bed 750mm, over neckline 1050mm, over carriage 500mm, diameter of the quill hole 84mm, 12 rpm of the motor from 8-850rpm, mounted with a 400mm universal plate with 3 self-centering jaws and a 600mm independent jaw plate, with fixed and mobile steady rest, lathe with protections, generally in good condition Lasdpfou I Rl Eex Agrji

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW Lodofg E Hyspfx Agrjai weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t Laodpfx Agst Hw R Dorsi dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Ljdpfx Aoq U Sa Ssgrsai Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity Laedpfsfg E Hwsx Agrji and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: used, Year of construction: 2003, Offset 6 color with coating Roland 706/3B+LTTLV (UV) Year: 2003 Number of impressions (mio): 500 Machine control - RCI Ledpfxouhtg Aj Agreai - IntelliTrax II density control Feeder - Non-Stop feeder - Logistic system in feeder Printing units - Number of printing unit(s): 6 - Straight machine - APL Full Automatic Plate Change - Automatic blanket washing device - Cooling system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 2 - Number of transfer unit(s): 2 - Tresu chambered ductor blade system - Number of Anilox roller(s): 2 Drying - IR dryer between coating unit 1 and 2 - IR + hot-air dryer in delivery - UV dryer in delivery: Eltosch Delivery - Non-Stop delivery - Powder spray: Grafix Cantronic 3000 - Logistic system in delivery Elevation - Machine raised by (cm): 50 Accessories - Air cabinet: Becker - Cabinets air cooled - Compressed air compressor, excluded

Condition: good (used), Year of construction: 2007, Gildemeister lathe NEF 600 year of construction 2007 Heidenhain Plus control Turning diameter max. 600 mm Center distance 1.250 mm Swing diameter over bed 600 mm Cross stroke 320 mm Lajdpfxsucl Alj Agrsi Main spindle: Speed range - main spindle max. 3,000 min/-1 Spindle bore 90 mm Chuck diameter 320 mm Tool turret: Number of tool positions 8 pos. Total power requirement 42 kVA Weight of the machine approx. 5.0 t Space requirement approx. 3.6 x 2.14 x 1.95 m Accessories: , flushing gun, Schunk lathe chuck 315 mm, Tailstock MK 5