Pillar Drilling Machine

KAMI BKM 5030

Condition: used, Year of construction: 2010, functionality: limited functionality, total width: 5,840 mm, total length: 15,700 mm, Offered here is a combination cold and deep-freeze room manufactured by Dresdner Kühlanlagenbau. Included in the scope of supply are the refrigeration units as well as the electrical equipment (lighting, control cabinet, etc.). Please note that the pallet racks shown in the pictures are not included in the sale. Unfortunately, the refrigeration unit for the deep-freeze compartment is defective. Please be aware that we are unable to carry out or arrange any repairs ourselves. Size of cold room (anteroom): 5.60m x 2.75m = 15.4 m² Size of deep-freeze room: 5.60m x 12.59m = 70.5 m² Clear internal height: 3.50m Insulation thickness: 120 mm Further dimensions and technical details can be found in the attached PDF document. Lodpfx Aistn U Rpeishh The unit is not dismantled and can be inspected on site at the production location in Thuringia by appointment. Dismantling and transport are not included in the price and must be organized by the buyer. However, assistance with dismantling and loading by forklift can be provided.

Condition: used, machine/vehicle number: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space required: 600 x 450 x 175 mm Lhsdpfjb Ez R Uex Aiish Weight: approx. 100 kg

Condition: new, Year of construction: 2023, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Management Act Ljdpfx Ash Ukupjiishh Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil / diesel / HVO100. Color: RAL 7035 Material: Steel, grade S235JRG2 Documents: Manufacturer’s certificate / type plate according to EN 12285-2, Ü marking Tank suitable for above-ground installation outside earthquake / flood zones. Equipment/fittings: Manway 600 mm with manway cover, screws, and gasket 1.1 Equipment/fittings: Manway 500 mm with manway cover and gasket 1 -Filling pipe 2” with TW closure (filling cap) (from 20 m³ = 3”) -Suction pipe 1 ¼” -Dipstick and dipstick closure - Tank content indicator -Vent pipe with cap 1 ½” -Limit switch with type approval -Leak detection device (optical) = LAS with leak detection fluid -Access ladder with platform for side mounting, supplied separately Sincerely, from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Condition: new, cutting diameter 225 mm saw band length 2455 mm table height 850 mm cutting width 245 x 150 mm cutting speed 45/90 m/min Lhjdpfjgxi D Tex Aiijh dimensions of saw-band 2480 x 27 x 0,9 mm 90 mm 90 mm 145 mm Impact energy 145 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,2 t dimensions 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 120 mm, total height: 1,820 mm, total width: 1,780 mm, total length: 1,400 mm, table width: 500 mm, table length: 900 mm, workpiece weight (max.): 190 kg, distance table to spindle center: 390 mm, Equipment: documentation/manual, Table surface (swivel table): 900 x 500 mm Lhodpfx Aishu Rwfeijh Max. workpiece weight: 190 kg Travel in X-axis: 600 mm Travel in Y-axis: 450 mm Travel in Z-axis: 380 mm Quill travel in Z1: 120 mm Spindle speed range: 40 - 2000 rpm Number of gear stages: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1560 kg including extensive standard accessories, including: Work area enclosure 3-axis digital display CONTUR Hydraulic tool holder for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, including hydraulic unit Monitored spindle guard 3 conventional handwheels Complete electrical equipment for three-phase power 400 V, 50 Hz Ball screws for X, Y, and Z axes Vertical milling head Fixed swivel table, 900 x 500 mm clamping surface Swiveling device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guide rails Automatic central lubrication for the axes and ball screws Coolant system with pump Set (4 pieces) of support elements Including tool holder package consisting of: 1 x collet chuck ER40 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Condition: new, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Lodoga T Eijpfx Aiiehh Face milling ----- 63 mm Motor ----- Brushless 750W Spindle speed, continuously variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. chuck key * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Box with various tools OPTIONAL * Base cabinet € 249.00 excl. VAT

Condition: excellent (used), mileage: 136,029 km, fuel type: diesel, color: red, lifting height: 37,400 mm, mast type: telescopic, Year of construction: 2016, operating hours: 7,578 h, = Additional Options and Accessories = - PTO = Further Information = General Information Year of manufacture: 2016 Intended use: Construction Technical Information Number of cylinders: 6 Drive: Wheeled Functional Mast: Telescopic (4 sections) Mast length: 37.4 m Lifting capacity: 40,000 kg Superstructure brand: TEREX AC40 CE marking: yes Condition Technical condition: very good Visual condition: very good TEREX AC40 CRANE DRIVE 4X4X4 COUNTERWEIGHT 5.5 TONS CARRIER 136029 KM AIR CONDITIONING Ljdpfouxu Dtox Aiiohh AUTOMATIC TRANSMISSION TIRES 60% GOOD SIZE 445/95/R25 ADBLUE CENTRAL LUBRICATION SYSTEM UPPER STRUCTURE HEATING 1 TIMBER SLEEPER 15 T. 1X WINCH MAX. LIFTING CAPACITY: 40,000 KG MIN / MAX BOOM LENGTH 9.5 M / 37.4 M MAX WORKING HEIGHT 37.4 METERS CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Ledpfx Aeg Rgucoiiohh Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: new, bore capacity in steel (diameter) 40 mm throat 370 mm bore stroke 200 mm spindle taper MT 4 MK table: 580 x 460 mm column diameter 160 mm turning speeds 75 - 2020 U/min feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement 1,5 kW weight of the machine ca. 700 kg. range L-W-H 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge Lhsdpef Nb E Refx Aiieh • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment

Condition: new, x-travel 300 mm y-travel 200 mm z-travel 350 mm Lhedpfx Aiofrzunjieh table-size 700 x 200 mm spindle taper ISO 40 turning speed range - horizontal 150 - 1660 U/min turning speed range - vertical 110 - 1230 U/min quill stroke 120 mm spindle drive 3,0 kW weight of the machine ca. 1,15 t dimensions of the machine ca. 1,31 x 1,38 x 1,65 m