Lathe

KAMI/SHEM DKM 500S X 1500 mm

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Hedpfxexftqdo Adajh Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: good (used), Year of construction: 2019, machine/vehicle number: XD-38II-CP-0703-H, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, turning diameter: 38 mm, spindle bore: 39 mm, power: 7.5 kW (10.20 HP), The machine can be viewed at our Immendingen site after consultation. Included is the original chip conveyor and a bar loading magazine from FMB 3-36 turbo Hodpfx Aevtmaljdash Includes Büchele SFB-301 high-pressure system 150 bar 4 valves

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: Hjdpfx Ajvrcqdjdash >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: good (used), functionality: fully functional, turning diameter: 655 mm, turning diameter over bed slide: 655 mm, turning length: 5,000 mm, Swing diameter over bed 655 mm Swing diameter over support 390 mm Turning length 5000 mm Hodpfxew N D T Se Adaeh Spindle bore 82 mm Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: Hsdpfx Adjilk H Toash - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: like new (used), Year of construction: 2021, Technical data: Conical bending machine Working width: 1050 mm Max. bending capacity for standard steel St40: 4.0 mm Diameter of conical upper roller: 70 - 185 mm Diameter of side and central lower rollers: 105 mm Conical bending device Mobile control panel with digital display Hydraulic folding bearings CE marking Hjdpfew An Uhsx Adajh Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very little used, as new condition The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear consistent with its age; used machines are sold without any warranty.

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t Hjdpfsm Rlb Njx Adash dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Center height: 260 mm Center distance: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Hsdpfx Adsctutmeash Weight approx. 2135 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 260 mm Center distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include infinitely variable speed control Hodpfxeh Rvxhe Adaoh Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: excellent (used), functionality: fully functional, Swing over bed: 1290mm Swing over cross slide: 910mm Swing in gap (l:500mm): 1580mm Center distance: 6000mm Spindlebore: 155mm Spindle speed: 6-800rpm Spindle nose: ASA A2 11" Workpiece between centers: 20 tons Taper in tailstock: Mk6 Longd.feed: 0.045-5mm/r Hodpfswc Nzpox Adajh Crossfeed: 0.0220-1.5mm/r Thread metric: 0.5-56 Thread's modulus: 0.25-28 Threads whitworth: 1/2-84/ " Spindle motor: 30 hp Manufacturing year: 1971 Length: 9500mm Width: 2000mm Height: 1600mm Weight: 13400kg Sony DRO cross slide 3 pcs. Steady rests Face plate 4-jaw chuck Hardened guideways Power on topslide