Heavy-duty lathe

KAMI/SHEM DKM 1000S

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Tjdpfxoyrrx Us Amyea Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Enclosed guarding

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Tsdpfxsgyy I Ae Amyja Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: good (used), Year of construction: 2016, Mazatrol Smooth Control, Table Size 600 X 500mm, Table Load 500 Kgs, Traverses X Y Z; 510 X 910 x 510mm, Min-Max Distance Spindle to Table 70 -580mm, Tedpfezibazsx Amyoa C Axis 0.0001 Degrees, A Axis -120 ~ +30 Degrees, Spindle Power 22kW, Spindle Speed 12,000 Rpm, 30 Station ATC, Spindle Taper DIN 40, Coolant, Through Spindle Coolant,

Year of construction: 2018, condition: ready for operation (used), A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible. Todpjwtg H Refx Amysa

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 100 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 400 mm, turning length: 2,000 mm, quill travel distance: 230 mm, total length: 3,600 mm, total width: 1,250 mm, total height: 1,400 mm, spindle speed (max.): 1,400 rpm, metric thread steps: 120, overall weight: 3,100 kg, three-jaw chuck diameter: 315 mm, Used traditional parallel lathe Sibimex CU500MT in excellent condition, ideal for mechanical workshops, industrial maintenance, metal fabrication, and precision machining. Solid, reliable machine, always carefully maintained. Sturdy cast iron frame, smooth slides, and precise mechanics. Perfect for those looking for a ready-to-use solution without investing in a new machine. Key features: * Excellent overall condition * Precise and reliable mechanics * Ready for immediate use Todpoym Ut Djfx Amyea * Ideal for machining shafts, flanges, bushings, and single parts * Perfect for small to medium production or maintenance Machine is operational and can be inspected by appointment. No urgent work required. Testing on site available.

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Tsdpfx Aoxxxbzemysa Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, turning diameter 325 mm turning length 1000 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 440 mm reus 12 (85-2000) U/min tail stock MK 3 quill stroke 100 mm diameter of quill 40 mm spindle taper DIN 55027 Nr. 5 spindle bore 32 mm feed längs 0,006 - 1,77 m/min feed quer 0,003 - 0,885 m/min Todpfxjtycpaj Amysa total power requirement 2,2 kW weight of the machine ca. 770 kg dimensions of the machine ca. 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall

Condition: not inspected (used), Year of construction: 1996, turning diameter over cross slide: 1,000 mm, turning length: 4,000 mm, turning diameter: 1,450 mm, spindle bore: 150 mm, rotational speed (max.): 560 rpm, overall weight: 20,000 kg, CNC NUM T Plus Capacity 4000 x 1450 mm on bed 1000 mm on cross-slide 4-jaw chuck 1200 mm Steady rest Tjdpfx Amoyzhrkjyja Automatic turret Set of tool holders Weight 20,000 kg

Condition: ready for operation (used), Year of construction: 1980, Gleason Hypoid cutter Sharpener 13A -1 pcs Milling diameter 89-500 mm Grinding wheel dimensions 305x19x102 mm Feed 0,05-0,18 mm Todpfjr Elpvox Amysa Grinding wheel drive motor - 1800 rpm (60 Hz) - 1500 rpm (50 Hz) Floor space 1240x2310 mm Height 1422 mm Machine weight 4083 kg Gleason 19 revacicle cutter checking machine - 1 pcs

Condition: good (used), Technical specifications: Drive motors / Motor Tjdpfx Amjf N Hdxoyja Quantity: 4 units available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz / rpm 1461/228 kW 1.5 S1 Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.