Decoiler Coiler unwinding reel

Julius

Condition: good (used), Max width: 1300 mm Nwodpfx Ageflvf Aj Ron Number of rolls: 5 With shear

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Reconstruction- 2022 Njdpfoh In Thsx Ag Rswn

Condition: ready for operation (used), Good condition Max width: 1300 mm Max diameter 1200 mm Nwodpsflvfvsfx Ag Ren

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW Nwsdpsfn Aqmofx Ag Rsn weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Nodpetuwz Iefx Ag Rown Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Condition: excellent (used), gear motor, electric motor, electric gear motor, spur gear motor -Condition: unused -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF97 DRN132S4/TF i27.58 -Speed: 53 rpm -Power: 5.5 kW -Shaft: Ø 60 x 90 mm Nwedpfx Agot Uluyo Ron -Protection class: IP54 -Quantity: 2 pieces available -Price: per piece -Dimensions: 860/350/H410 mm -Weight: 170 kg/piece

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate Nedeif Sg Sopfx Ag Rown - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: refurbished (used), functionality: fully functional, overall weight: 3,200 kg, spindle diameter: 6,995 mm, type of input current: three-phase, roll diameter: 210 mm, spindle speed (max.): 20 rpm, spindle speed (min.): 60 rpm, total height: 1,900 mm, total length: 2,700 mm, total width: 1,600 mm, roll width: 175 mm, year of last overhaul: 2026, warranty duration: 12 months, Equipment: documentation/manual, Thread rolling machine ORT RP18 B 2-roll overhauled Nedpfx Aevxa Dbog Rown See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Nodpjxb Uq Djfx Ag Rown Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: Nwsdpfx Ajxzr Rueg Rsn L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.