Horizontal band saw automatic machine

JAESPA W 320 G

Condition: used, Horizontal Mitre Band Saw in Swivel Bow Design JAESPA Type W 320 G Serial No. 18793 / 99 Year of Manufacture: 1999 Cutting Capacity at 90° (Round): Ø 320 mm Cutting Capacity at 90° (Square): 320 x 320 mm Kodpewwaz Ajfx Ah Nedg Cutting Capacity at 90° (Flat): 460 x 200 mm Cutting Capacity at 45° (Round): Ø 290 mm Cutting Capacity at 45° (Flat): 290 x 220 mm Cutting Capacity at 45° (Square): 240 x 240 mm Cutting Capacity at 30° (Round): Ø 200 mm Cutting Capacity at 30° (Square): 200 x 200 mm Cutting Capacity at 30° (Flat): 220 x 200 mm Saw Blade Dimensions: 4120 x 27 x 0.9 mm Blade Speed: approx. 50 m/min Material Feed Height: approx. 630 mm Saw Motor Power: 1.5 kW Connection: 400 Volt, 50 Hz - Quick mitre adjustment via pivoting saw bow with rotary table and clamping - Infinitely variable mitre cuts from 30° - 90° - Hydraulic saw bow movement with rapid approach and return stroke after cutting - Material height detection via limit switch - Quick-adjust vice with eccentric clamping - Coolant system integrated in machine base - Emergency stop mushroom push button Required space (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Condition: used, different types available Kedsdc A Sbspfx Ah Njdg

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm Kdedstylguspfx Ah Nsg - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg Kodpfsg Ip Efsx Ah Nedg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min Kjdovuullspfx Ah Nedg impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer with pneumatic drive can only be offered without putting into operation in our warehouse video at seller's site before dismantling available

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg Kdjdpjumhm Aofx Ah Nsg LxWxH 7100x2400x3000mm Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Ksdpfx Aewudhush Njdg Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Ksdpfxjvi Hrye Ah Njdg Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Year of construction: 2002, condition: used, pressure 63 t throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm Kjdpfx Ahslp U D Te Nodg total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: used, functionality: fully functional, operating hours: 4,189 h, fuel type: diesel, mast type: duplex, FORKLIFT TCM FD25Z1 IZUSU ENGINE DIEZEL SHORT MAST.....START AND DRIVE..... Kdsdpfet U Ivtjx Ah Nsg