Deep hole drilling machine / Retrofit 2023

IXION AUERBACH IA2 TLF-1200.4

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm Djdoylw Stspfx Akcecg • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Year of construction: 1991, condition: ready for operation (used), Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible. Dcedpfjvu Dfbox Akcjg

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm Dcodpfx Akjbh Ubwjceg coil weight: 12,5 t mandrel Ø: 508 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: Haas Model: ST-30Y Year of manufacture: 2019 Control: Haas Technical Data: Max. swing diameter: 533 mm Max. machining diameter (with BMT 65): 349 mm Distance between centers: 826 mm Bar capacity: max. 76 mm Travel distances: X-axis travel: 239 mm Y-axis travel: +/- 51 mm Z-axis travel: 826 mm Main spindle: Spindle speed: 3,400 rpm Drive power: 22.4 kW Turret: Number of tool stations: 12 positions Tool holder: BMT 65 Rapid traverse rates: Dcjdpfxsyzz Urj Akceg Rapid traverse (x, y, z): 12 / 12 / 24 m/min Technical features & accessories: - Driven tools (C-axis) - Automatic tool presetting arm - Coolant tank - Coolant pump - Chip conveyor - 254 mm chuck - Tailstock Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to alterations and errors in technical details and information, as well as prior sale!

Condition: excellent (used), Kolbus casing in with joint forming by Smyth After general renovation at GM Gross. Still in production Dcsdpfewm E Rnsx Akcog Format / size 100x125mm - 260x350mm Book block thickness / Book block thickness 4-60 mm capacity from 500 -800 blocks per hour

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Dodpfx Astycg Sekcscg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: good (used), Year of construction: 2014, functionality: fully functional, number of spindles: 1, number of slots in tool magazine: 60, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical specification: - Horizontal spindle - Spindle HSK-A63 - Spindle torque 240 Nm (to be confirmed) - 4-axis machining - ATC for 60 tools - Pallet changer (2 pallets) - Pallet size 500x500 mm - Coolant chiller - Coolant filtration system by Knoll - Coolant pressure 50 bar through spindle - Fanuc control system Dcedoyrfxhepfx Akceg - Chip conveyor - Robot interface - Linear measuring systems (scales) - Manufactured in 2014

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm Dsdpfx Aeycuuyekcecg • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: ready for operation (used), functionality: fully functional, Used gear grinding machine Niles ZSTZ 630i. The machine is fully functional; a video can be provided upon request. Dedpfjxzfugsx Akcecg

Condition: used, Year of construction: 2014, total height: 1,950 mm, total length: 2,400 mm, total width: 1,600 mm, Empty weight: 2.000 kg Price: On request Dsdexq Aqwopfx Akcocg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 3098034 - Drive system: CNC - Centre height [mm]: 450 - Swing over bed [mm]: 900 - Distance between centres [mm]: 900 - Bed width [mm]: 445 - Spindle bore [mm]: 60 - Max. spindle speed [rpm]: 1800 - X-axis travel [mm]: 203 - Z-axis travel [mm]: 762 - Transport dimensions: 2400mm x 1600mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum