CNC Lathe

INDEX G300

Year of construction: 2008, condition: ready for operation (used), Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible. Bjdpfxjznmxmo Amyjdf

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Bdedeyyxh Topfx Amyjf Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1995, turning diameter 300 mm turning length 710 mm control SIEMENS SINUMERIC 840 total power requirement 40 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Bjdpfst Hw Suex Amyedf Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1995, turning diameter 250 mm turning length 750 mm control Siemens type 840 c spindle passage 65 mm Tool changer 2 live tooling 2x Revoler weight of the machine ca. 7 t Main and counter spindle 3-jaw chuck with numerous jaws Hainbuch collets Many tool holders Various driven tools Bar loader "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Bdjdpfjzfqhyex Amysf If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] Bedpfx Amsx Tvkljyodf - Max. machining length : 728 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 6000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Tailstock stroke : 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] MACHINE HOURS - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 9 - Number of turning tool holders : 3 - Electric transformer - Collet chuck

Condition: used, Year of construction: 2003, Technical details: turning diameter: 270 mm turning length: 710 mm Bdodpox Dlhlefx Amyjf weight of the machine ca.: 6,5 t max. swing diameter: 590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools. *

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,245 mm, spindle motor power: 9,400 W, total height: 2,100 mm, total width: 2,150 mm, overall weight: 8,330 kg, product length (max.): 7,250 mm, number of axes: 7, This 7-axis Index G300 L YB was manufactured in 1999. It features a maximum turning diameter of 270 mm and a maximum swing diameter of 590 mm. The machine includes a robust tool system with 12 stations and a milling spindle speed of up to 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Index G300 L YB horizontal turning machine we have for sale. Contact us for further details. • Power supply: 3 phase / 50 Hz • Rated voltage: 400 V • Control voltage: 24 V • Rated current: 120 A • Rated power: 67 kW • Electrical cabinet weight: 710 kg • Spindle bore: 65 / 90 mm • Spindle bearing diameter (front): 110 / 140 mm • Spindle nose: ISO 702/1 size 6 / 8 • Chuck diameter: 200 / 250 / 315 mm • Maximum turning diameter: 270 mm • Maximum swing diameter: 590 mm • Power (100% duty cycle): 19 / 28 / 43 kW • Power (40% duty cycle): 28 / 40 / 57 kW • Torque (100% duty cycle): 120 / 178 / 275 Nm • Torque (40% duty cycle): 178 / 255 / 363 Nm • Maximum speed: 5000 / 3500 rpm • Counter spindle bore: 65 / 90 mm • Counter spindle bearing diameter: 110 / 140 mm • Counter spindle nose: ISO 702/1 size 6 / 8 • Counter spindle chuck diameter: 200 / 250 / 315 mm • Counter spindle power (100%): 19 / 28 kW • Counter spindle power (40%): 28 / 40 kW • Counter spindle torque (100%): 120 / 178 Nm • Counter spindle torque (40%): 178 / 255 Nm • Counter spindle max speed: 5000 / 3500 rpm • Minimum distance between spindles: 20 mm • Longitudinal travel: 770 / 1310 mm • Rapid traverse: 22.5 m/min • Rapid traverse X: 24 m/min • Rapid traverse Z: 30 m/min • Rapid traverse Y: 24 m/min • Tool system: VDI 30 • Number of tool stations: 12 • Max boring bar diameter: 50 mm • Milling spindle speed: up to 6000 rpm • Milling spindle power: 9.4 kW Bdjdpoyyyy Dsfx Amyof • Milling spindle torque: 19 Nm • Tailstock stroke: 630 mm • Tailstock quill diameter: 125 mm • Tailstock force: 7500 N • Hydraulic tank: 165 liters • Coolant tank: 300 liters Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools No

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. Bjdpfx Amsxwdw Eeysdf In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Manufacturer: INDEX Model: G300 CNC: Siemens Sub spindle lathe X-axis: 215 mm Y-axis: 180 mm Z-axis: 710 mm Turning diameter: Ø300 mm Chuck diameter: 250 mm Spindle nose: ISO 702/1 A8 Spindle speed: 4,000 rpm Spindle bore: Ø90 mm Motor power: 44 kW Tool turret: 12 positions Bdedpfxsypliue Amyof Machine dimensions: 4350 x 2900 x 2700 mm Machine weight: 6550 kg.

Year of construction: 2005, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK, overall weight: 8,000 kg, turning length: 800 mm, machine/vehicle number: 500571, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within either May 11–13, 2026, or May 18–21, 2026, without exception. TECHNICAL DETAILS Travel X-axis: approx. 200 mm Travel Z-axis: approx. 500 mm Spindle bore: approx. 100 mm Turning length approx.: 800 mm MACHINE DETAILS Control: SIEMENS SINUMERIK Operating voltage: 400 V Rated current: 80 A Connected load: 47 kW Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 3,300 mm Weight: 8,000 kg EQUIPMENT Double turret with 12-position tool turret each Tailstock Main spindle Chip conveyor Two manuals BÜCHEL brand extraction filter Note: Machine can be transported on a standard truck. External reference: Pieper - Lot 50 Bjdpfxjynhd Ss Amysdf

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm Bdedpfx Amjw S Efzjyof swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 500522, spindle speed (max.): 3,500 rpm, overall weight: 6,500 kg, spindle diameter: 140 mm, counter spindle speed (max.): 3,500 rpm, TECHNICAL DETAILS Control: Siemens Sinumerik / Index C200-4D Main Spindle Spindle bore with collet clamping: 90 mm Spindle diameter at front bearing: 140 mm Spindle nose ISO 702/1 (Size): 8 Chuck diameter: 250/315 mm Max. rated turning diameter: 270 mm Max. swing diameter: 590 mm Bdodpfx Asxvq Rpsmyof Speed: max. 3,500 rpm Counter Spindle Spindle bore with collet clamping: 90 mm Spindle diameter at front bearing: 140 mm Spindle nose ISO 702/1 (Size): 8 Chuck diameter: 250/315 mm Speed: max. 3,500 rpm Min. distance collet: 20 mm Rapid traverse: 22.5 m/min Turret Number of tools: 12 MACHINE DETAILS Dimensions & Weight Footprint: approx. 8/10.5 m² Height: 2,150 mm Machine weight approx.: 6.5 t EQUIPMENT Tailstock Automatic loading and unloading system

Condition: used, Year of construction: 1997, turning diameter 400 mm turning length 1250 mm control Siemens type 840 C swing diameter 590 mm turning speeds 3500 U/min Torque 275/178 Nm spindle passage 50/65 mm clamping chuck diameter 250 mm output 43/28 kw Tool changer 80 Pos. Bedpfx Aeyqvwfemysdf tool taper Capto C 4 Counter spindle 3500 rpm Flexible head 1500/6000 rpm (2 gear ratios) Head with 4 stations (2 fixed stations for turning/2 milling stations) Power 9.4 kW Travel 1250 mm Spindle head ISO 702/1 size 8 (HSP) size 6 (GSP) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, Spindle speed, stepless electronic control: 40-4000 rpm Spindle mount: MK 2 Table height adjustment with rack and pinion Thread cutting capacity, max: M10 Adjustment of thread cutting depth via digital depth gauge Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment with rack and pinion Continuous/normal drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Overhang: 225 mm Column diameter: 60 mm Usable table area (W x L): 330x250 mm Machine dimensions (W x D x H): 420x450x860 mm Machine dimensions (with base): (W x D x H): 452x700x1130 mm Weight: 62 kg Max. distance spindle/table/base: 300/360 mm Motor: AC with frequency inverter, 230 V, 0.54 kW OPTION: Drilling kit no. 2 - Felix vise, jaw width 80, clamping range max. 120 mm - Quick-change drill chuck 1-13 mm, mount B16 - Taper shank MK II/B16 - Reducing sleeve MK II/MK I Price: € 320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE! Bdsdsby Swhepfx Amyof