Barloader

IEMCA BOSS 552 / 32L

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Ledpfx Apot Akt Rsmjhk Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 1,400 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, total height: 5,190 mm, total width: 4,875 mm, total length: 3,885 mm, rotational speed (max.): 360 rpm, torque: 17,880 Nm, table load: 8,000 kg, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, Vertical turret lathe in flat-guided design with extensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000rpm SK50 22 KW - C - axis 0.001 degrees - Complete housing - Chip conveyor - Internal coolant supply - Fanuc control - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel - Signal light - Manual 3-jaw faceplate 1250mm - Renishaw tool measurement Lhjdpfxjvtzc Ie Apmok - Renishaw workpiece measurement - Glass scales in X and Z axes - 24 month guarantee

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Lsdpot Rmdzofx Apmohk Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Ljdpfx Ajxmurrjpmohk

Condition: used, Year of construction: 2005, x-travel 600 mm Lhjdpfovxwq Ejx Apmek y-travel 500 mm z-travel 600 mm control iTNC 530 Heidenhain table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Lhjdsht Hg Dspfx Apmok Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C ±360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) Lhsdpfx Aey Tv Nbjpmsk TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBE LASER TOOL MEASUREMENT APS - Advanced Process System APS Extended ITS - Intelligent Thermal Control CINEMATIC OPTIONS CHIP CONVEYOR WITH TSC MACHINE WEIGHT: 19,000 KG

Condition: used, Year of construction: 2017, operating hours: 45,000 h, functionality: fully functional, machine/vehicle number: 17L5M0045, turning length: 490 mm, turning diameter: 395 mm, spindle bore: 61 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 105 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (max.): 6,000 rpm, total height: 2,085 mm, total length: 2,790 mm, total width: 1,752 mm, overall weight: 4,150 kg, The lathe was primarily used for the production of spacers, distance sleeves, and other stainless steel fasteners. It has always been operated by professionals and professionally maintained. Lodpfx Aexylzdspmehk

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm Ledpfjwwt Nmex Apmehk NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons 3826ä

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. • Optional: • 5 pcs. External turning tool holders SQ20, BMT 55 (500-0696) • 2 pcs. Facing tool holders R/L (500-0701) • 1 pc. Double external turning tool holder HS/GS (500-0868) • 2 pcs. Double external turning tool holders HS (500-0705) • 1 pc. Parting tool holder (500-0709) • 7 pcs. Boring bar holders; BMT 55 ID 32 (500-0698) Ljdpfx Asyrtbqopmohk • 2 pcs. Triple internal turning tool holder GS (500-0707) • 2 pcs. Cover IK (500-0711) • 1 pc. Reducing sleeve set Boring (n/a) • 2 pcs. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. Adapter set PRECI-FLEX ER25 (BMT 55P) (500-0523) • 2 angled externally cooled external heat sinks Eppinger • 2 straight externally cooled external heat sinks Eppinger Additional Information As new, showroom model Technical Specification Counter Spindle Yes Driven Tools Yes